Gate Repair in Highlands - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Highlands

Gate repair in Highlands usually comes down to two things: what the San Jacinto River has done to your gate since the last flood, and whether your operator is worth saving. We work on both. Most repairs here run $145 to $480 for hinge, latch, and sag work, and $220 to $750 when an electric operator is involved. You’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.

Call (626) 649-4572

Why Latch & Post Gate Repair Is Highlands’s Preferred Gate Repair Company

Highlands homeowners don’t have the same gates as the rest of Harris County. We know that because we’ve worked drives off Wallisville Road, properties near the Lynchburg Ferry approach, and older acreage parcels along Thompson Road. Our Gate Repair team sees flood silt where other companies expect clean conduit, and rust patterns that come from Ship Channel air, not just rain. That local read on a gate’s history changes the fix.

We’re part of the Cedarwell family, operating since 2009 under the same C.A.R.E. values: Clean up like it’s our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. Our technicians are background-checked and uniformed. They lay drop cloths and put on shoe covers before stepping inside. Before they leave, they take a photo of the clean-up so you can see what was done.

Every repair is backed by the 365-Day Done Right Promise. If it isn’t right, Latch & Post makes it right. No argument, no fine print. That matters in Highlands, where a gate that slumps or binds after a wet spring is a recurring fact of life. We don’t want you calling us back for the same hinge twice.

Wood Gate Repair in Highlands

Wood Gate Repair in Highlands is the steady work of this area, because so many homes here sit on the older lots and semi-rural parcels where wooden ranch fencing and simple wood driveway gates are the norm. Flood cycles warp panels. Saturated clay heaves posts. The combination leaves a gate leaning, dragging, or swinging past its latch. A typical wood gate repair in Highlands runs $160 to $520 depending on whether we’re straightening the frame, replacing rotted pickets, resetting a post, or doing all three.

Resetting Heaved Posts

When clay soil saturates and then dries, it expands and contracts with real force. A hinge post that was plumb in March can be leaning by June. We dig around the footing, correct the lean, and pack with compacted material so the post has a better chance through the next wet-dry cycle.

Panel Straightening and Latch Alignment

Wood panels bend before they break. Often we can pull a warped panel back into line, rehang the hinges, and realign the latch so the gate closes without lifting. When the wood is too far gone, we say so and show you the rot, then price a replacement panel honestly.

Driveway Gate Repair in Highlands

Driveway Gate Repair in Highlands covers everything from a simple chain-link swing gate on a gravel drive to an electric slide gate at the end of a long river-bottom lot. These gates carry the most wear because they’re the ones used every day, often automated, and exposed to the full brunt of Houston humidity. A standard driveway gate realignment or hinge replacement in Highlands typically runs $180 to $480. Electric operator work adds $220 to $750 on top of the mechanical repair.

Slide Gate Track and Wheel Work

Slide gates fail when the track fills with sand, gravel, or flood sediment, or when the wheels wear flat. We clear the track, check the wheels and rack, and correct alignment so the motor isn’t fighting the gate on every cycle. That strain is what kills operators early.

Swing Gate Sag Correction

Long swing gates sag because the hinge post moves or the top hinge pulls out of the panel. We correct the geometry, reinforce the hinge points, and if the post has heaved from clay, we reset it before rehanging the gate. A gate that swings true puts years back on its hardware.

Trusted Brands We Service in Highlands

We’re factory-trained on the brands Highlands families actually have on their posts and pedestals: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Highlands we see a lot of older Viking and DoorKing operators on ranch-style properties, and Ghost Controls on newer DIY installs. We keep common boards, remotes, and safety edges on the truck so turnaround is usually same-visit. When a part isn’t on hand, we know exactly what to order and it comes fast.

Common Gate Repair Problems We See in Highlands Homes

• River silt in conduit and pedestals. After a San Jacinto overflow, fine silt gets into underground conduit and settles around operator pedestals. The gate trips, hums, or won’t respond, and the motor isn’t the problem at all.
• Clay heave pulling posts out of line. Saturated clay expands, pushing post footings up or sideways. Gates that hung perfectly for years start dragging, binding, or missing the latch.
• Accelerated rust on hinges and welds. Ship Channel airborne fallout plus Gulf humidity attacks exposed metal between flood cycles. Hinges seize, welds split, and rack hardware crusts over faster than you’d expect from rain alone.
• Older operators with obsolete control boards. Many Highlands properties still run operators installed decades ago. When the board fails, the question is whether to retrofit or replace, and that depends on what the rest of the unit looks like.

Pricing for Gate Repair in Highlands, TX

We Also Serve Cities Near Highlands

Latch & Post Gate Repair serves Highlands and the surrounding communities. Our crews regularly work in Channelview, Baytown, La Porte, and Deer Park, so we’re already familiar with the drives and gate styles out this way. If you’re just across the line in one of those cities, the same written-price promise and C.A.R.E. routine apply.

FAQs About Gate Repair in Highlands