Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Four Corners
Gate repair in Four Corners typically runs $140-$480 for most common fixes, with operator control board replacements landing between $300-$650 depending on the brand. We serve the Four Corners area including Solterra Resort, Champions Gate, and Windsor at Westside, usually arriving same day or next business day for non-emergency calls. You’ll get a written price before any work starts, every time. Call (626) 649-4572 and a live person answers, day or night.
Four Corners isn’t like a standard residential neighborhood. The gates here work harder. Short-term rental guests cycle through community entrances hundreds of times a month, summer storms knock out control boards, and saturated soil shifts post footings. We know those failure patterns because we see them every week. Our Gate Repair team is factory-trained on the brands most common in these communities, and we stock the parts this area actually needs.
Why Latch & Post Gate Repair Is Four Corners’s Preferred Gate Repair Company
Latch & Post Gate Repair has been operating since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Our work in Four Corners is led by Cody Beckman, and the standard we hold in this area is simple: show up on time, explain the price before touching anything, and leave the property cleaner than we found it.
What Four Corners homeowners and property managers tell us they value most is the Cedarwell Care Promise. We lay drop cloths on the floor and put on shoe covers before we step inside your home or rental property. We ask before moving or touching anything. We take a photo of the cleanup before we leave. Those aren’t upsells. They happen on every visit, at no extra charge.
Every job is backed by the 365-Day Done Right Promise. If the repair or installation isn’t right, we make it right. No argument, no fine print.
Wrought Iron Gate Repair in Four Corners
Wrought iron gate repair in Four Corners usually means addressing one of three things: a sagging hinge post, a broken weld at a stress point, or a latch that no longer lines up after the post shifted in saturated soil. Most wrought iron repair jobs in this area run between $180 and $420, depending on whether we’re welding a break, resetting a post, or realigning the entire gate leaf.
Hinge Post Reset and Realignment
Four Corners gets nearly daily afternoon thunderstorms from June through September, and the flat terrain doesn’t drain quickly. When soil stays saturated, post footings heave or sink slightly. The symptom is a wrought iron gate that drags on the driveway or swings open on its own. We dig and reset the post, then realign the gate so the latch catches cleanly.
Weld Repair and Rust Treatment
Rust forms fastest at the bottom rail and at hinge welds, especially in communities where irrigation overspray hits the gate nightly. We grind back the rust, repair the weld, and treat the area so it doesn’t fail again next season. If we’re working inside a rental property’s pedestrian gate, we schedule around guest turnover when we can.
Metal Gate Repair in Four Corners
Metal gate repair in Four Corners covers steel, aluminum, and tubular gate frames common in the area’s 2000s-through-2020s planned communities. Typical repair costs here run $160-$520, with the higher end covering bent rails, broken gate arm mounting points, or a complete realignment after a vehicle strike.
Slide Gate Track and Roller Repair
Slide gates on the west side of Four Corners see heavy guest traffic at all hours. When a roller bearing wears out, the gate grinds instead of glides and eventually binds. We replace rollers, clean the track, and adjust the rack and pinion so the gate moves smoothly. Waiting usually makes the motor work harder than it should, which shortens its life.
Gate Arm and Mounting Plate Repair
At Champions Gate and similar communities, guests frequently drive through before the arm fully rises. The arm snaps mid-shaft, and the mounting plate bends. We replace the arm and straighten or replace the plate, then recalibrate the operator’s open and close limits so the arm cycles fully before the gate opens for the next vehicle.
Trusted Brands We Service in Four Corners
Our technicians are factory-trained on Linear, Viking, and Ghost Controls equipment, plus DoorKing systems common at gated rental community entrances. We keep the most-needed parts for these brands stocked in our Houston metro office so Four Corners customers aren’t waiting a week on a freight order. If your community entrance runs a DoorKing slide operator that failed after a lightning strike, we likely have the board on hand or can source it within a day. The same goes for Linear swing arms on residential drives throughout the Four Corners area.
Common Gate Repair Problems We See in Four Corners Homes
- Lightning-fried operator control boards (June through September). Central Florida’s afternoon storms produce frequent nearby strikes, and Four Corners’ flat terrain offers no protection. When a control board fails, the gate goes dead or cycles erratically. We replace the board and test the loop detector and safety edges in the same visit.
- Gate arms snapped mid-shaft by guests driving through too early. Short-term rental guests often don’t know the gate’s cycle time. They hit the gas before the arm clears, and it breaks. This damage pattern is far more common here than in Kissimmee or Clermont just 20 miles away.
- Hinge posts heaving in saturated soil. Four Corners’ flat, poorly-draining ground means post footings shift after heavy rain. Swing gates sag at the post, not the panel, and the latch stops lining up. We reset the post and realign the gate rather than just adjusting the striker plate as a temporary fix.
- Loop detectors failing to sense guest vehicles. High-turnover access systems cycle hundreds of times a month, and loop detectors buried in the pavement wear out faster than in traditional HOA neighborhoods. The symptom is a gate that won’t open for a car waiting directly on the loop. We replace the detector and retune the sensitivity.
Pricing for Gate Repair in Four Corners, TX
Four Corners gate repair pricing depends on the specific failure, and you’ll see the exact number in writing before any work starts. A standard gate-latch replacement runs $140-$220. Wrought iron weld repairs run $180-$420. Operator control board replacement for a Linear or DoorKing swing operator runs $300-$650. Full gate realignment after a post shift runs $200-$480. Slide gate roller and track work runs $160-$400. These are the ranges we quote regularly for this area, not a national average.
What affects the price: the gate’s brand, the amount of access the post area has, and whether the failure is mechanical or electrical. Every estimate is free, and the price is quoted and agreed before we begin. Call (626) 649-4572 and we’ll get you the written number.
We Also Serve Cities Near Four Corners
Latch & Post Gate Repair is based in the Houston metro office, and our crews serve Four Corners locally. If you’re managing a property just outside the Four Corners area, we also handle Gate Repair in Four Corners nearby and work in Houston, San Antonio, Dallas, and Fort Worth. The same written price and cleanup standard applies everywhere we go.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Four Corners
Yes, we regularly coordinate with HOA management companies and architectural review boards in Four Corners for gate replacement projects. We provide the spec sheet for the proposed gate, including height, finish color, and material, and we submit the drawings in the format the board requires. Most approvals in the area take two to four weeks depending on the association’s meeting schedule. We’ve worked on gates in Solterra Resort, Champions Gate, and Windsor at Westside, so we know what those boards look for. Call (626) 649-4572 and we’ll start the paperwork with you.
The arm is breaking because guests drive through before the operator has fully raised it. In Four Corners’ short-term rental communities, guest turnover means unfamiliar drivers use the gate every week, and they don’t wait for the full cycle. The fix is a combination of a stronger replacement arm, adjusted open and close limits so the arm clears faster, and in some cases signage or a keypad prompt that changes guest behavior. We’ve made this exact repair at Champions Gate multiple times this season.
Most likely, yes. Lightning-fried control boards are the leading cause of gate downtime in Four Corners from June through September. A nearby strike doesn’t need to hit the gate directly; induced surge through the power or loop wires is enough to kill the board. We test power to the operator first, then inspect the board for visible burn marks or failed capacitors. Replacement runs $300-$650 for the boards common in this area. Call (626) 649-4572 and we’ll confirm the diagnosis and give you the written price before replacing anything.
The post footing has shifted. Four Corners sits on flat, poorly-draining soil, and after heavy summer rain the ground swells and heaves. The hinge post tilts, the gate leaf drops, and the latch end drags on the driveway. Adjusting the hinges alone won’t fix it because the post itself has moved. We excavate around the footing, reset the post plumb, and repour it, then realign the gate so it swings level. The job usually runs $200-$480 depending on the gate’s size and weight.
Yes, we work with HOA management companies across Four Corners on shared entry systems, keypad access points, and community gate repairs. That includes coordinating with the property manager on scheduling around guest turnover, handling the gate’s back-end access codes, and providing documentation for the association’s file. If your community’s access system runs DoorKing, Linear, or Viking equipment, our techs are factory-trained on those brands and can typically diagnose the failure on the first visit. Call (626) 649-4572 to get a technician scheduled.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Four Corners since 2009.





Before
After
Before
After
Before
After