Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fountainebleau
Most gate repairs in Fountainebleau run between $180 and $950 depending on what failed, with standard latch replacements starting around $180 and full operator swaps landing closer to $700-$950. We quote the exact price in writing before any work starts, so you know the number before we touch a single bolt. Our Gate Repair team works throughout Fountainebleau, from the streets west of the Palmetto Expressway down to the neighborhoods around West Flagler, and we answer every call with a live person at (626) 649-4572.
If your gate is sagging, grinding, refusing to open, or burning through openers, we can usually be out the same week. Fountainebleau’s older CBS homes carry a particular set of gate problems, and we know them well enough to name the fix before we arrive.
Why Latch & Post Gate Repair Is Fountainebleau’s Preferred Gate Repair Company
We’re a Cedarwell-family gate specialist, founded in 2009, and our entire focus is gates: the latch that holds them and the post that carries them. That narrow focus means our technicians in Fountainebleau see more ornamental iron gate failures in a month than a general handyman sees in a year, and we carry the parts to fix most of them on the first visit.
The crews serving Fountainebleau are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values on every job: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Shoe covers and drop cloths go down before we step inside, and you get a photo of the cleanup before we leave. That’s not an upsell here; it’s the standard, no extra charge.
Every repair and installation is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print. That promise holds for every home we service in Fountainebleau, from the quiet blocks near the golf course to the busier streets closer to Flagler.
Wrought Iron Gate Repair in Fountainebleau
Wrought iron gate repair in Fountainebleau is one of our most frequent calls, and it’s almost never just about the iron. The decorative panels, scrollwork, and bars on these older gates are usually sound; the trouble sits at the hinge post.
What a Typical Wrought Iron Job Involves
We remove the gate from its hinges, assess the post footing and the hinge hardware, and correct the sag at its source rather than shimming the panel. On many 1960s-1980s CBS homes in Fountainebleau, that means re-setting the post in fresh concrete after cleaning out the corroded remnant of the old embedded steel. We also check each hinge leaf for wallowing and replace any that have gone egg-shaped before re-hanging the gate and adjusting the latch strike. Most standard wrought iron repair work here lands between $250 and $650, and you’ll see the number in writing first.
When Homeowners Call Us for Wrought Iron
The two most common calls are a gate that drags on the driveway and a latch that no longer catches. The dragging usually traces to the post, not the panel. The latch failure often traces to a hinge that has dropped a quarter-inch and thrown the strike out of line. Both are fixable same-visit in most cases, and we can quote it precisely once we see the post set and the hinge spread.
Metal Gate Repair in Fountainebleau
Metal gate repair in Fountainebleau covers the broad middle: aluminum pedestrian gates, steel driveway gates, and tube-frame gates on the tract homes along the side streets off West Flagler. The metal itself is rarely the problem; the hinges, the posts, and the hardware around the metal are where failures concentrate.
Common Metal Gate Fixes
We repair hinge pull-outs where the gate’s weight has torn through thin tube walls. We re-align frames that have racked from years of wind loading and the occasional shoulder from a delivery truck. We weld cracks at stress points, replace broken latch mechanisms, and adjust or replace the closing hardware so the gate latches without slamming. Metal gate repair in Fountainebleau typically runs $180-$600.
Operators on Metal Gates
When a metal gate has an automatic opener, the failure is often the opener itself working against a gate it was never sized for. We’ll measure the gate’s true weight, check the operator’s rating, and tell you honestly if the opener belongs on that panel. If it doesn’t, we’ll quote the right-size replacement and the entrapment protection to go with it.
Trusted Brands We Service in Fountainebleau
Fountainebleau driveways carry a lot of Linear and Viking operators, with Ghost Controls and DoorKing common on the newer installations. Our techs are factory-trained on all four, plus FAAC, BFT, LiftMaster, Elite, and Mighty Mule. We keep common boards, remotes, and safety-edge components in local stock so most Fountainebleau repairs don’t wait on a parts shipment. When you call, tell us the brand on the opener, the age of the gate, and what it’s doing or not doing; that gets us to the likely fault before we arrive.
Common Gate Repair Problems We See in Fountainebleau Homes
- Hinge-post sagging on ornamental iron gates. Fountainebleau’s alkaline fill soil holds moisture against embedded steel, and decades of that contact corrodes the post below grade. The gate sags at the hinge even when the panel and hinges look straight.
- Undersized openers straining against heavy gates. Many homeowners retrofitted automatic openers onto ornamental iron swing gates that were designed as manual gates. The opener burns out every season because it was never rated for that panel’s weight.
- Ground-operator flooding each rainy season. Slide-gate ground operators sit in shallow trenches that fill with water during the June-October downpours. Motors and control boards short out, and calls spike every summer.
- Spalled concrete at anchor posts. The concrete footings around older gate posts in Fountainebleau crack and flake as the embedded steel corrodes and expands. That spalling is a structural warning, not just a cosmetic crack.
Pricing for Gate Repair in Fountainebleau, FL
Here’s what Fountainebleau homeowners can expect to pay for common gate work, and these are the numbers we quote from, not vague ranges stretched to cover any possibility:
- Latch replacement or adjustment: $180-$290
- Hinge repair or replacement: $220-$450
- Gate realignment and post shimming: $250-$500
- Operator replacement (parts and labor): $700-$950
- Post re-set with new concrete footing: $450-$800
Every quote is written and agreed before work starts, and no number changes mid-job unless you approve it first. Call (626) 649-4572 for a free estimate specific to your gate, your post condition, and your opener.
A Note on Miami-Dade’s Hurricane Code
Because Fountainebleau sits inside Miami-Dade’s High-Velocity Hurricane Zone, every replacement gate operator or piece of hardware on these ornamental iron gates must carry a Miami-Dade Notice of Acceptance. That compliance layer simply does not apply to the same repair across the Broward county line. It matters for two reasons: first, the hardware we install here has been tested to hold up to the wind-load ratings this county demands. Second, an NOA-listed operator is required for a compliant installation, and we won’t install one that isn’t. If a previous owner put a non-listed opener on your gate, we’ll tell you and quote the correct replacement.
A Fountainebleau Job We Worked Recently
We were called to a CBS home off West Flagler near the Fountainebleau Golf Course where a heavy ornamental swing gate had been straining a LiftMaster opener that was never rated for its weight. The motor had burned out for the third summer running. Our tech found the real trouble at the hinge post: decades of South Florida ground moisture had corroded the embedded steel and spalled the surrounding footing, so the gate leaned even when the panel looked straight. We re-set the post footing, corrected the sag at the hinge, and installed a properly sized operator with working safety photocells. The gate now runs silent.
That sequence, post first and opener second, is the Fountainebleau pattern. Fix the opener alone and you’ll be back next summer. Fix the post and the opener together, and the gate runs for years.
We Also Serve Cities Near Fountainebleau
Our Fountainebleau crews regularly cross into neighboring areas for Gate Repair in Fountainebleau and the surrounding metro, including Jacksonville, Miami, Tampa, and Orlando. If you’re on the edge of Fountainebleau or just outside it, call us; dispatch is coordinated from our Miami (South FL) office, and we’ll tell you which crew can reach you soonest.
Serving Fountainebleau, FL - Our Local Coverage Area
We’re based in the Fountainebleau area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fountainebleau
The opener is almost certainly undersized for the gate. Many Fountainebleau homeowners retrofitted automatic openers onto heavy ornamental iron gates that were designed as manual swing gates, often without permits. The opener strains against a gate far over its rated weight, overheats, and dies. The fix is sizing the opener to the gate’s true weight, and that’s a measurement we take before quoting anything. Call (626) 649-4572 and ask us to weigh your gate.
The sag is at the post, not the visible gate. Fountainebleau’s alkaline fill soil holds moisture against the embedded steel post below grade, and that steel corrodes over decades. As it corrodes, the surrounding concrete footing spalls and the post shifts, so the gate leans even when the panel and hinges look straight. The fix is re-setting the post in fresh concrete, not shimming the hinge. We do that work regularly here.
Yes, and it applies to operators and hardware, not just windows and roofs. Any replacement gate operator or hardware installed in Fountainebleau must carry a Miami-Dade Notice of Acceptance. That requirement doesn’t apply across the Broward county line, so it’s easy for a non-local contractor to miss. We only install NOA-listed equipment in Fountainebleau, and we can check your current opener’s listing during any repair visit.
It’s common, but it isn’t something you have to live with. Fountainebleau’s June-October downpours flood the shallow trenches where slide-gate ground operators are mounted. When water reaches the motor or the control board, it shorts out. We can raise and re-bed the operator, improve the trench drainage, and seal the housing properly so it survives the wet months. That repair typically runs $400-$800 depending on the operator and the trench condition.
Every automatic gate in Fountainebleau should have working safety photocells and a reversing mechanism, and the best way to know is to have a trained technician test both. We test the photocell path, the closing-force reversal, and the edge sensors on every visit where an operator is present. If any of them has failed or been bypassed by a previous repair, we’ll tell you and quote the fix. Entrapment protection is a safety requirement, not an add-on. Call (626) 649-4572 to schedule a check.
Call Latch & Post Gate Repair in Fountainebleau
We answer the phone with a live person, 24 hours a day, 7 days a week. No voicemail, no callback queue. Tell us what your gate is doing or not doing, and we’ll schedule a visit to Fountainebleau, give you a written price before any work starts, and back the entire job with the 365-Day Done Right Promise. Where it matters, we use pet-safe lubricants and can schedule around nap time if quiet matters at your house. The floors stay clean, the price stays honest, and the gate runs the way it should.
Call (626) 649-4572 today for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fountainebleau since 2009.