Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Enterprise
Gate repair in Enterprise usually comes down to one of three things: a hinge post that has shifted in caliche soil, an operator corroded by Clark County’s hard water, or a gate that never got the HOA approval it needed in the first place. We fix all three. Latch & Post Gate Repair has served Enterprise homeowners since our founding in 2009 as part of the Cedarwell family, and our technicians know the subdivisions off Warm Springs, Silverado Ranch, and Blue Diamond like the back of their hand. Call (626) 649-4572 and a live person answers, any hour, any day.
Why Latch & Post Gate Repair Is Enterprise’s Preferred Gate Repair Company
Our reputation in Enterprise was built one gate at a time, mostly on word of mouth through HOAs and property managers who have watched us work. A homeowner in Rhodes Ranch off Durango called us for a sagging driveway gate three years ago and has since referred six neighbors. That is how it goes here. When we show up, the crew wears uniforms, uses shoe covers and drop cloths inside the home, and hands you a written price before any tool comes out of the truck. Those are not upsells. They are how Cody Beckman has run every Enterprise job since day one. We are background-checked, factory-trained on the brands Enterprise families actually own, and we take a photo of the clean-up before we leave so you can see the floor is exactly as we found it.
Metal Gate Repair in Enterprise
Metal gate repair in Enterprise means working with wrought iron and tubular steel that has spent 15 to 20 years under the Mojave sun. The powder coating breaks down within five to seven years, then the bare steel underneath starts to rust, especially along the bottom rail where irrigation overspray sits. We strip the affected sections, repair or replace the rusted members, and finish with a coating matched to the existing color so the repair does not stand out against the rest of the fence line. Most metal gate repairs in Enterprise run $180 to $650 depending on how much steel needs to be replaced and whether the post is still true.
Weld and Rust Repair
Weld and rust repair in Enterprise is the half-sibling of every metal gate repair. Heat expansion from 110°F summers cracks welds at the hinge side and along picket attachments. We grind out the failed weld, re-weld with a process suited to the gate’s steel thickness, and treat the surrounding rust so it does not creep back under the new coating. A single cracked weld repair typically runs $120 to $280.
Gate Realignment
Gate realignment in Enterprise usually starts with a level check on the post, not the panel. When caliche soil heaves from irrigation water, the post tilts, and the gate panel follows. We reset and re-secure the post footing before adjusting the hinges, because realigning the panel on top of a moving post just means you will call us again in six months. Realignment work runs $150 to $400 when the post is sound, and $400 to $900 when the footing needs re-setting.
Wood Gate Repair in Enterprise
Wood gate repair in Enterprise is a different animal than metal work. The wood gates here are mostly cedar and redwood frames with steel hardware, and they fail at the hardware first. The dry desert air shrinks the wood around the hinge screws, the gate drops, and then the latch no longer lines up with the strike plate. We rebuild the frame with moisture-treated stock, replace the hardware with exterior-rated components, and re-hang the gate so it swings true. Most wood gate repairs in Enterprise run $150 to $550 depending on whether we are replacing hardware, rebuilding a frame section, or doing both.
Lock Repair
Lock repair in Enterprise often turns into a strike plate conversation. Hard water calcium builds up inside the latch mechanism and on the strike plate, which makes the lock bind even when the key turns fine. We clean and lubricate the mechanism with pet-safe products, adjust the strike plate alignment, and replace the lock cylinder only when it is truly worn. Expect $90 to $220 for a standard gate lock repair.
Hinge and Post Repair
Hinge and post repair in Enterprise is the repair we do most. The gate sags, the homeowner replaces the hinges, and then it sags again because the real problem is the post footing heaving in caliche soil. We remove the affected post, re-set the footing deeper with proper drainage, and then install the hinges on a post that will actually hold them. Hinge-only repairs run $110 to $240. Post re-setting runs $350 to $800.
Trusted Brands We Service in Enterprise
Our Enterprise trucks carry common repair parts for the brands this area actually uses: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For an HOA slide gate on a DoorKing operator that died after fifteen years of hard water exposure, we can usually swap the control board or the limit switch on the first visit without waiting on a distributor. Every technician is factory-trained on these systems, and the 365-Day Done Right Promise covers the work. Our Gate Repair team keeps the service van stocked specifically for Enterprise’s mix of residential swing gates and shared entry slide gates, which means less waiting when a loop detector or safety photocell goes down at the community drive.
Common Gate Repair Problems We See in Enterprise Homes
- HOA architectural-review stalls. A homeowner in the Mountain’s Edge area wanted a taller gate with a different finish, but the management company would not sign off until the spec matched the neighborhood’s original design standards. We handled the paperwork with them before ordering hardware, which saved the owner a flagged inspection and a do-over.
- Shared entry-system failures. The gate at the front of the community starts ignoring resident clickers because the loop detector in the driveway has corrosion from hard water, or a safety photocell is out of alignment from years of heat cycling. One resident’s keypad stops working, and soon the whole board is calling the management company.
- Caliche-heaved hinge posts. Enterprise sits on desert hardpan that shifts when irrigation water penetrates. Gates that look like hinge failures are frequently post failures instead, and the fix only lasts if the footing is re-set first.
- UV-degraded rollers and operators. The sun here breaks down rubber and nylon rollers, and lubricant inside automated operators thins out fast in 110°F heat. Seized rollers add load to the operator, which then burns through its motor sooner than any warranty assumes.
Pricing for Gate Repair in Enterprise, NV
Gate repair in Enterprise runs a wide but predictable range, and we put the exact number in writing before we start. Weld and rust repairs are $120 to $280 per weld. Hinge-only work is $110 to $240. Post re-setting runs $350 to $800 depending on the footing depth and whether concrete removal is involved. Operator replacement on a residential slide or swing gate usually lands between $600 and $1,800 including the new motor, mounting, and safety check. A full gate replacement with HOA-approved materials changes the picture: $1,200 to $4,500 for the gate and installation, depending on size, material, and whether we are matching an existing fence line. You will see the final number before any work begins. Call (626) 649-4572 for a free estimate, and we will walk you through exactly what the job needs.
We Also Serve Cities Near Enterprise
Latch & Post sends the same crews and the same written-price promise to Enterprise and the surrounding communities: Las Vegas, Henderson, North Las Vegas, and Spring Valley. Scheduling is coordinated from our Las Vegas office, and the vans are stocked for the whole southwest valley, so you get the same same-day response whether you are off Blue Diamond or up near Summerlin.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Enterprise
Yes, most Enterprise HOAs require architectural-review approval before you replace a gate or change its style, height, or finish, and we handle that paperwork with your management company before we order any hardware. Simple repairs that match the existing gate, like a hinge replacement or a weld fix, usually do not need review, but we check your specific community’s rules on the first visit so nothing gets flagged at inspection. Call (626) 649-4572 and we will pull up your subdivision’s requirements while we are on the phone.
Two reasons: Clark County’s water is hard, routinely above 300 parts per million calcium carbonate, and that mineral buildup corrodes hinges, gate operators, and strike plates years ahead of manufacturer assumptions. Add the Mojave sun, which destroys powder coating and rubber rollers in five to seven years, and the mid-2000s gates in Enterprise are all failing on roughly the same schedule. Failures here cluster by subdivision vintage, not neglect.
The hinge post has likely heaved, because the caliche soil under southwest Clark County shifts when irrigation water saturates the hardpan, and the post tilts just enough to throw the whole gate out of alignment. Replacing the hinges without re-setting the post footing will fix it for a season and then it will sag again. We check the post with a level before we touch the hinges on every sagging gate call.
Usually it is not the operator itself. The loop detector in the pavement or the safety photocell at the drive gets corroded by hard water, or the sun has degraded the photo eye’s alignment, and the system starts ignoring signals from keypads and clickers. We test the loop, the photocell, and the operator in that order before replacing anything. For shared entry systems, we also coordinate directly with your property management company on approvals and access.
Yes. We work with community managers and HOA boards across Enterprise on shared entry gates, visitor call boxes, and perimeter fencing, and we handle the architectural-review paperwork and invoicing directly with the management office. Property managers appreciate that homeowners get a written price before work starts and a photo of the finished clean-up. Call (626) 649-4572 and we will get your community’s gate issues on our schedule.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Enterprise, NV and the surrounding southwest valley.