Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Del Aire
If your gate in Del Aire sags, sticks, or won’t close, you’re dealing with a common problem in this unincorporated LA County pocket: salt air and age. Most gates here hang on 1950s and 60s ranch homes within 2 to 3 miles of the Pacific, so rust and worn hardware show up early and often. That’s why we stock the parts these older systems actually need and send techs who know the difference between a fixable hinge post and one that needs a footing reset. Call (626) 649-4572 and a live person answers, day or night.
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists. We’ve done this work since 2009 and we focus on one thing: gates. Latch, post, operator, hinges, weld, rust. That’s the whole job.
Why Latch & Post Gate Repair Is Del Aire’s Preferred Gate Repair Company
Del Aire homeowners don’t need a general handyman. They need someone who understands why a 1962 swing gate on a post-war tract lot corrodes faster than the same gate would in Torrance or Gardena. The daily marine layer rolling in off Dockweiler Beach deposits salt-laden moisture on metal surfaces, and bare or thinly painted iron shows through-rust within a few years. We see it weekly. Our technicians arrive with rust-inhibiting primer, quality topcoats, and replacement hardware that’s rated for coastal exposure – not just whatever’s on the truck.
Every visit starts with a written price, agreed to before any work begins. No pressure, no surprise invoice at the end. We put shoe covers on at the door and lay drop cloths wherever we work, because your floors matter as much as your gate. Before we leave we take a photo of the clean-up. That’s the Cedarwell C.A.R.E. routine, and it’s on every single job in Del Aire.
Our team is factory-trained on the brands families here actually own: LiftMaster, FAAC, Viking, Ghost Controls, DoorKing, Elite and others. That means the right fix on the first visit. And everything we do is covered by our 365-Day Done Right Promise: if the repair isn’t right, we make it right. No argument, no fine print.
We also coordinate dispatch and scheduling from our Los Angeles office, so when a Del Aire customer calls about a gate that won’t close on a Sunday morning, we can get a local crew there without routing through three departments.
Iron Gate Repair in Del Aire
Iron Gate Repair in Del Aire usually means one of three things: a hinge post that’s drifted out of plumb, a weld that’s cracked at the stress point, or rust that’s eaten through the frame near the bottom rail. Homes in this community are almost entirely modest 1950s and 60s ranch-style tracts, and many still have their original wrought-iron driveway gates with welded-steel frames. Decades of deferred maintenance show up as corroded hinges, sagging corners, and latch bars that no longer line up.
A standard iron gate repair on a single swing gate in Del Aire typically runs $180 to $420, depending on whether we’re replacing hinges, re-welding a cracked joint, or correcting a post that’s moved. If the gate needs full rust remediation with grinding, priming, and repainting, add roughly $75 to $150 per section. You’ll see the exact number in writing before we touch anything.
Hinge Replacement and Post Straightening
When a post is out of plumb, replacing hinges alone won’t hold. The gate will sag again within a season. We reset the post footing or sleeve the base, then hang fresh hinges so the gate swings true and latches without dragging.
Weld and Rust Repair
Del Aire’s salt-air corridor finds every bare spot. We grind back to sound metal, weld the crack, then prime and topcoat with coastal-rated products so the repair doesn’t become a repeat call in twelve months.
Sliding Gate Repair in Del Aire
Sliding Gate Repair in Del Aire typically involves the track, the rollers, or the operator – and on these older properties, often all three. A sliding gate that shudders, sticks mid-travel, or growls when it moves usually has debris in the track or rollers that lost their bearings years ago. The constant salt moisture accelerates wear on every exposed component.
A roller and track service on a standard residential slider in Del Aire runs about $160 to $310. If the operator itself needs a new control board or limit switch, that climbs to $380 to $700 depending on the brand and age. We always quote the full repair in writing before ordering parts or starting work.
Track Alignment and Roller Service
Soil movement around these 1950s-era slabs shifts the track rail over time. We re-align the track, replace worn rollers, and lubricate with pet-safe products where there’s a choice.
Operator and Control Board Issues
Older sliding gate operators fail differently in Del Aire than inland. The control board corrodes from daily salt-laden moisture even when the housing looks fine. We diagnose first, then tell you honestly whether a retrofit or a replacement makes more sense.
Trusted Brands We Service in Del Aire
We’re factory-trained on Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. For Del Aire customers that matters because we keep common replacement boards, safety photocells, and hardware in local stock, so we’re not waiting on a parts order from out of state. Whether it’s an old DoorKing swing arm or a Ghost Controls opener on a side-yard gate, our techs know the wiring, the fault codes, and the specific parts each model needs. Most repairs are completed in a single visit.
Common Gate Repair Problems We See in Del Aire Homes
- Corroded control boards in legacy operators. The daily marine layer deposits salt-laden moisture on everything metal, and older LiftMaster and FAAC boards absorb it slowly until a relay burns out. The operator may work intermittently for weeks before failing entirely.
- Worn hinge posts and cracked welds on original iron gates. Most Del Aire gates are the originals from the 50s and 60s, and the stress points near the hinges and bottom rail crack under years of rust plus daily swing loads. The gate sags, drags, and eventually won’t latch.
- Out-of-plumb posts from decades of soil movement. These post-war tracts have settled and shifted, and gate posts go with them. Even new hinges won’t fix a gate whose post leans an inch out of vertical.
- Misaligned safety sensors on older automated gates. In Del Aire’s foggy mornings, condensation gets into sensor housings, and the gate refuses to close or reverses mid-cycle. Cleaning helps, but aging lenses and wiring often need replacement.
Pricing for Gate Repair in Del Aire, CA
Here’s what Del Aire homeowners can expect to pay: a basic gate realignment or latch replacement runs $120 to $240. Hinge replacement on a standard iron gate runs $180 to $320. Electric gate operator repair, including control boards and safety sensors, runs $380 to $700 depending on brand and age. Full iron gate rust repair with re-welding and repainting runs $300 to $650 for a typical single driveway gate. Sliding gate track and roller service runs $160 to $310.
A new automated swing gate operator installed on an existing gate runs $950 to $1,800 for the equipment and labor, with the exact model and price in writing before you approve anything. If the gate itself is beyond saving, a new fabricated steel gate for a standard Del Aire driveway runs $1,800 to $4,200 installed, depending on size, design, and automation. We always give you the number first, and the estimate is free.
We Also Serve Cities Near Del Aire
While this page focuses on Gate Repair in Del Aire, our crews also take calls in Los Angeles, San Diego, San Jose, and San Francisco. If you’re on the edge of Del Aire and the zip code gets fuzzy, just call and we’ll sort out the service area in seconds. Our Gate Repair team covers the broader region with the same pricing and guarantee.
Serving Del Aire, CA - Our Local Coverage Area
We’re based in the Del Aire area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Del Aire
For most repairs – replacing a control board, hinges, rollers, or a latch – no permit is required. But if the work involves installing a new automated gate operator on a new or substantially altered gate, Del Aire’s status as an unincorporated LA County pocket means the permit path goes through LA County Building & Safety, not a city office. Homeowners who call Hawthorne or Inglewood city hall about a gate permit get sent to the wrong counter. We verify the correct permit path before ordering equipment, so you don’t end up with a job that can’t pass inspection. Call (626) 649-4572 and we’ll check your specific situation.
Most of the time it can be fixed. Sagging on these older Del Aire gates usually comes from either worn hinges or an out-of-plumb post, not from the gate frame itself failing. We reset the post footing or sleeve the base, replace the hinges, and re-weld any cracked joints. If the iron has rusted through in multiple places, replacement is often cheaper than repeated patch welding. We’ll show you photos of the damage and give a written price for both options before you decide.
Del Aire sits 2 to 3 miles inland from the Pacific at El Segundo, squarely in the daily marine-layer corridor. Salt-laden moisture rolls in off Dockweiler Beach, settles on metal surfaces, and works its way into control boards and wiring connections. Inland LA communities don’t get that daily salt bath. That’s why we use corrosion-resistant replacement parts and seal every electrical connection on repairs here, even when the original installer didn’t.
Yes. Any automatic gate operator installed or replaced in Del Aire must meet UL 325 and current California safety standards, which means at least one monitored entrapment protection device – usually a photocell or contact edge – and proper limits set so the gate can’t crush or trap anything. Older operators installed before these rules often lack proper sensors. We can retrofit most, and we include the safety components in the written quote for any operator replacement.
Usually yes. We service older Viking, DoorKing, Ghost Controls, LiftMaster, and FAAC sliding operators, and we stock common boards and limit switches for many legacy models. If the board is no longer manufactured, we’ll tell you that plainly and quote a retrofit replacement rather than hunting for used parts that fail a year later. The estimate is free, and the price is in writing before we order anything. Call (626) 649-4572 to schedule an inspection.
Call Latch & Post Gate Repair in Del Aire
If your gate is sagging, sticking, grinding, or refusing to open, call (626) 649-4572. A live person answers around the clock – no voicemail, no callback queue. We’ll schedule a visit to your Del Aire home, put the price in writing before any work begins, and leave your floors the way we found them. That’s the Cedarwell Care Promise, and the 365-Day Done Right Promise backs every repair and installation we do.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Del Aire as part of the Cedarwell family since 2009.