Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Bayonne
Gate repair in Bayonne usually means one of three things: a wrought iron gate that has rusted through at the hinges, a sagging gate that won’t latch, or an automatic opener that stopped responding after a winter storm. Most repairs in Bayonne run between $180 and $640 depending on whether we are replacing a hinge, resetting a post, or swapping a corroded operator board. We are Latch & Post Gate Repair, part of the Cedarwell family, and we have been fixing gates since 2009. Call us at (626) 649-4572 and a live person answers, any hour.
We work all over Bayonne, from the blocks around Hudson County Park to the streets down by Constable Hook, and you can learn more about our Electric Gate Repair in Bayonne. The salt air here does not care what neighborhood you live in. It gets into everything.
Why Latch & Post Gate Repair Is Bayonne’s Preferred Gate Repair Company
We are not a general handyman service. We are a Gate Repair specialist, and every technician we send into Bayonne is background-checked, uniformed, and trained on the brands families actually have: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, and BFT. The person who shows up at your door will know your gate better than you do by the time they leave.
What sets us apart in Bayonne is the routine we never skip. Before any work starts, you get a written price. Not a verbal estimate, not a text message, a written line-item price you can hold onto. Our technicians put on shoe covers and lay drop cloths before stepping inside, even if the gate work is outside and they just need to pass through the house to reach the side yard. When the job is done, they take a photo of the cleanup and show it to you before leaving. Those things are included on every visit, never charged as extras.
Every repair and installation is covered by the 365-Day Done Right Promise. If something is not right, we make it right. No argument, no fine print, no chasing a warranty department. Cody Beckman and the rest of our team stand behind that.
Dispatch for Bayonne is coordinated from our New York City office, and our crews live and work in the Hudson County area. We know the housing stock, the lot sizes, and the way a 1930s row house gate behaves differently from one on a newer build near the water.
Wrought Iron Gate Repair in Bayonne
Wrought iron gate repair in Bayonne almost always starts at the hinge post, not the panel itself. The original ornamental gates on 1900s to 1940s two-family and three-family brick homes in Bayonne are often 70 to 100 years old, and the salt-laden air from Newark Bay and the Kill Van Kull has been working on those iron hinges for decades. A homeowner will usually notice the gate dragging on the sidewalk or failing to close before they see the rust that caused it. Repairs typically run $220 to $480 depending on whether we are replacing strap hinges, reinforcing the hinge post pocket, or cutting out and rewelding a corroded section of the frame.
Hinge Replacement and Post Pockets
On Bayonne’s tight 25-foot lots, most wrought iron gates swing into narrow side yard passages with little clearance. When a hinge crumbles from rust, the whole gate drops and the latch stops lining up. We replace the hinge with stainless hardware and rebuild the pocket in the masonry or steel post so the gate hangs square again.
Sag Correction on Ornamental Gates
A sagging iron gate in Bayonne is rarely just a panel problem. The post itself has usually shifted or the hinges have worn oval. We reset the post on a proper footing where needed, correct the panel alignment, and weld any cracked joints before they snap. Seeing a dropped gate and assuming it needs a new panel is the most common mistake we correct.
Metal Gate Repair in Bayonne
Metal gate repair in Bayonne covers aluminum, steel, and mixed-material gates. Steel gates here fail from salt corrosion that starts at the welds and hinge points, not on the visible faces. Aluminum gates hold up better against salt but can crack at stress points, especially when a post shifts during freeze-thaw cycles. Depending on the repair, Bayonne homeowners usually pay $180 to $640; a simple steel gate latch replacement lands at the low end, while rewelding a cracked frame or fabricating a new lower rail costs more. You will see the exact number before we touch anything.
Weld Repair and Rust Remediation
Weld joints are where Bayonne’s salt air does its worst work. We grind out rotted welds, treat the surrounding steel, re-weld with proper penetration, and coat the repair with a marine-grade primer and finish. Where a gate is too far gone at the connection points, we fabricate replacement sections rather than patching rust that will come back in two years.
Realigning Metal Gates on Settled Posts
Bayonne’s freeze-thaw winter cycle levers gate posts in their footings. A gate that worked fine in October may bind or fail to latch by March. We pull leaning posts, reset them with proper concrete and anchors, and rehang the gate so the latch and the keep actually meet. In some cases, we add stiffener plates to stop a shared party-wall post from moving again.
Trusted Brands We Service in Bayonne
Our technicians are factory-trained on the openers and operators homeowners in Bayonne actually install, including Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, and Elite. We keep common boards, remotes, safety photocells, and rack and pinion kits stocked for the brands we see most often in Hudson County, so a repair is often one visit rather than two. If your automatic gate uses a brand we have not seen in a while, we will tell you straight and order the correct part rather than installing something that is close enough.
Common Gate Repair Problems We See in Bayonne Homes
- Hinge post corrosion at the pocket. The original wrought iron or early steel posts on 70- to 100-year-old Bayonne homes rust from the inside at the hinge pocket. What looks like a panel sag is usually post failure, and replacing the hinge without treating the post buys you a year at most.
- Freeze-thaw weld fractures. Salt-laden moisture gets into micro-cracks in weld joints during the wet months, then ice expands and splits the joint open in winter. We see a spike in failed welds every spring, and the pattern is worse in Bayonne than in inland Hudson County towns.
- Corroded automatic gate operator boards. Homes near Constable Hook and Bergen Point have openers that fail in five to seven years, even on units installed new. The salt air gets into the control board, the rack and pinion, and the photocell housings. Many of these units just need the right marine-grade parts, not a full replacement.
- Gates on tight side lots binding after post movement. The 25-foot lot spacing throughout much of Bayonne means gate posts often sit near shared brick party walls or older footings. When a post shifts even an inch, the latch stops throwing cleanly and the gate begins to bind.
Pricing for Gate Repair in Bayonne, NJ
You should know what a gate repair costs in Bayonne before you decide anything. Simple hinge replacements on a metal gate typically run $180 to $320. A wrought iron gate that needs a hinge pocket rebuild and post attention lands between $220 and $480. Weld repair and rust remediation on a steel gate starts around $250 and can reach $640 when we are fabricating replacement rails or re-setting a leaning post. Automatic gate operator repairs add $160 to $520 depending on whether we are replacing a board, a photocell, or a rack and pinion assembly.
Every Latch & Post visit includes a written price before any work begins. The number we quote is the number you approve. If we open something up and find additional damage, we stop, show you what we found, and get your sign-off on the new number before continuing. Estimates are free.
Let us break down typical line items in Bayonne:
- Hinge replacement (two hinges, steel or iron): $180-$320
- Weld repair, single cracked joint: $140-$280
- Post reset with new concrete footing: $350-$640
- Full gate realignment: $160-$340
- Automatic opener board replacement (Linear, Viking, Ghost Controls, DoorKing): $200-$460
- Rack and pinion replacement for slide gates: $280-$520
- Full wrought iron hinge pocket rebuild: $300-$480
We Also Serve Cities Near Bayonne
Beyond our work across Gate Repair in Bayonne, our crews cover the surrounding Hudson and Union County area, including Elizabeth, Jersey City, Hoboken, and Newark. If you are in one of those cities and need a gate looked at, call the same number and we will get you scheduled.
Serving Bayonne, NJ - Our Local Coverage Area
We’re based in the Bayonne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bayonne
Because Bayonne is a peninsula with tidal saltwater on three sides, so salt-laden air covers the whole city, not just waterfront blocks. That salt works into hinge pockets, weld joints, and post footings at a rate that surprises people who moved here from inland towns. This is why we specify galvanized or powder-coated steel, stainless fasteners, and aluminum where it makes sense from the first quote rather than treating marine-grade parts as an upgrade. Call (626) 649-4572 for a free evaluation of what your gate actually needs.
In Bayonne it is usually the post, especially on the 1900s to 1940s row houses where the original post has been rusting at the hinge pocket for decades. The hinge tears out of the pocket and the gate drops, and the panel itself may still be straight. We diagnose this before quoting, because replacing a panel on a bad post means redoing the job in two years.
Hot-dip galvanized steel that is powder-coated, or aluminum. Ornamental ironwork is beautiful and repairable, but it needs a marine maintenance cycle: regular inspection of hinge pockets, immediate touch-up of any chip or crack, and stainless hardware from the start. Near Constable Hook and Bergen Point we see untreated steel gates rust through in as little as five to seven years, so material choice matters more here than a warranty on paper.
Check whether the opener has power and whether the safety photocells are lined up, but after a Bayonne winter we would also look for corrosion on the control board and the limit switch wiring. Salt moisture gets into control housings during wet months, then the freeze-thaw cycle stresses already-degraded connections. A technician can test the board and replace the corroded components without replacing the whole opener in most cases.
Yes. Swing gates on narrow 25-foot lots need clearance we account for when setting the post and the swing arc. Slide gates along back alleys or driveways with minimal side room work better when the track and the rack are installed with stainless hardware. We quote both configurations and recommend the right one for the space you have, not the one that is easier to sell.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family.





Before
After
Before
After
Before
After