Gate Repair in Argyle - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Argyle

Gate repair in Argyle most often comes down to two things that fail together: a gate post that has moved in Blackland Prairie clay and an operator that has fallen out of travel limits because of it. We fix both in the same visit, and we quote a written price before any work starts. If your driveway gate is dragging, sagging, or stuck on a five-acre property off Gibbons Road or a ranch entrance near Copper Canyon, call Latch & Post Gate Repair at (626) 649-4572. We send a factory-trained technician to Argyle with the parts on the truck, not a promise to come back later.

Call (626) 649-4572

Argyle is not a standard suburban gate market. Nearly every parcel sits on two to ten acres, and a single service call often spans a motorized ornamental estate gate at the street, a manual pipe gate at the barn lot, and a smaller paddock gate near the stalls. Our crews move between welding, operator electronics, and hinge work on one visit. That density of mixed gate types is specific to Argyle, and it is precisely the work we are built for.

Why Latch & Post Gate Repair Is Argyle’s Preferred Gate Repair Company

We are a Cedarwell-family gate specialist, not a general handyman service. Latch & Post has been operating since 2009 and exists for one job: gates. That focus matters in Argyle, where a five-acre horse property gate call can require a welder, an electrician’s diagnostic skill, and a machinist’s eye for square and plumb. Our technicians train on the brands families here actually own, including Linear, Viking, and DoorKing, and they service Gate Repair jobs with the full Cedarwell Care Promise: a written price before work starts, shoe covers and drop cloths where the job touches the home or finished surfaces, and a photo of the cleanup before the truck leaves.

Argyle homeowners tell us the same thing again and again: they want a straight number before the work begins and a crew that leaves the place clean. Every job, from a sagging estate gate off Old Justin Road to a welded pipe gate repair at a barn off Crawford Road, includes that. Cody Beckman leads the team that dispatches Argyle calls from our Dallas-Fort Worth office, and a live person answers the phone all day, every day. No voicemail, no callback queue. When a February ice storm leaves a gate operator dead at the entry, you reach a person, not a recording.

Learn more about how we serve this area on our Gate Repair in Argyle page.

Gate Welding in Argyle

Gate welding in Argyle is repair work on the steel and pipe gates that hold livestock and define property lines, and it almost always runs alongside ranch fencing rather than ornamental driveway entries. A six-foot pipe gate at a barn lot off FM 407 may have a hinge that has torn loose from the post, or a sag that a re-weld plus a diagonal brace will fix. Most gate welding calls in Argyle run $250 to $600 per gate depending on the extent of the weld repair, the need to reset a post, and whether we are adding gussets or replacing a broken hinge barrel.

Pipe Gate Hinge and Latch Repair

The most common weld repair we make on Argyle horse properties is a hinge that has pulled away from a round post after years of lateral load. We re-weld the hinge, add a reinforcing plate where the post has thinned, and set the latch so the gate closes square instead of riding the ground.

Estate Gate Structural Welding

Ornamental iron estate gates tell you when a weld is failing: the gate starts to droop at the latch stile and the operator works harder every week. We re-weld the failed joints, true the frame, and check the operator limit settings after the metal work is done so the gate does not grind its own gears to death.

Commercial Gate Repair in Argyle

Commercial gate repair in Argyle covers the automated cantilever slide gates and dual swing gates that protect equestrian facilities, storage yards, church parking areas, and the larger acreage properties along Highway 377 and I-35W. These gates cycle constantly, and when a V-wheel wears or a limit sensor fails, the gate becomes a liability. Commercial gate repair in Argyle typically runs $350 to $900 per visit depending on whether we are replacing a rack, a drive motor, a photo eye, or the operator board itself, and the price is always written before we start.

Slide Gate Track and Roller Service

On an Argyle commercial slide gate, the rollers and track take the abuse. We replace seized bearings, set V-wheel clearance, and true the track so the gate moves with one finger instead of fighting the motor. Left alone, a bad roller takes out the rack and the operator together, which triples the repair bill.

Operator Diagnostics and Loop Repair

When a commercial gate opens for no reason or ignores an exit loop, the fault is usually in the loop detector or a failing safety edge. We trace the circuit, replace the loop or edge where needed, and test obstruction reversal before we leave. Safety on an automatic gate is not optional, and we never leave an operator running without verified entrapment protection.

Trusted Brands We Service in Argyle

Argyle driveways are long, and most automated gates here are hard-wired, not solar. That means the operator brand matters when a board fails or a gear strips. We are factory-trained and stock common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On a call near McMakin Road or Lantana, we often carry replacement boards, limit switches, and gear assemblies for Linear and Viking units, so a dead operator is often running again the same day rather than after a parts order. If your gate runs on DoorKing, we carry their solar controllers and keypad wiring kits for the rural entries where trenching power is not practical.

Common Gate Repair Problems We See in Argyle Homes

• Post shift from Blackland Prairie clay. The clay under Argyle swells after spring rain and cracks in the summer drought, which pushes gate posts out of plumb and throws swing and slide gates out of their travel limits. This is the single most common reason Argyle gates stop mid-cycle, and it returns until someone does more than just re-tune the limits.
• Sagging ornamental estate gates. Argyle’s heavy custom iron and aluminum driveway gates settle over time, especially where the hinge post was set without enough concrete. The gate sags at the latch stile, the rack and pinion misaligns, and the operator strains against the drag until a gear or a board fails.
• Frozen operators and shattered plastic gears from ice storms. The February 2021 freeze took out residential gate operators across Argyle by cracking plastic gear assemblies and seizing exposed limit switches. After any hard freeze, we find dead operators at entries on both sides of town.
• Mixed manual and motorized gate systems. Many Argyle parcels have a motorized street gate plus one or two manual pipe gates at the barn or paddock. One call often means a welded hinge on one gate and a limit-sensor fix on another, which few suburban gate companies are set up to handle in one trip.

Pricing for Gate Repair in Argyle, TX

We Also Serve Cities Near Argyle

Our Argyle crews cross town lines for gate work every week, and we serve Flower Mound, Roanoke, Lake Dallas, and Denton with the same written-price guarantee and same-day scheduling where the part allows. If you live just outside Argyle in any of these communities, we can usually route a technician to you within the same window.

FAQs About Gate Repair in Argyle