Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antioch
Gate repair in Antioch usually comes down to one thing: the Delta wind. It funnels through the Carquinez Strait and hits the city’s 1990s and early-2000s tract homes with a consistency you won’t see in Brentwood or Clayton. That wind racks wooden panels, pulls hinges out of alignment, and burns through first-generation swing-gate opener control boards. Our Gate Repair team works those neighborhoods weekly, and we know which streets are failing in clusters before we even arrive. If your gate is sagging, sticking, or the opener just hums and does nothing, call (626) 649-4572. We’ll give you a written price before any work starts.
Why Latch & Post Gate Repair Is Antioch’s Preferred Gate Repair Company
We’re part of the Cedarwell family of independent gate specialists, and we’ve been doing this since 2009. What that means in Antioch is simple: a background-checked technician who shows up in uniform, lays down drop cloths before stepping inside your house, and puts on shoe covers at the door. Your floors stay clean. We explain the repair in plain terms before touching anything, and you get the price in writing first. No pressure, no surprises on the invoice.
Antioch homeowners call our Electric Gate Repair in Antioch for a few consistent reasons. The technician actually knows the difference between a gate off Hillcrest Avenue versus one near Lone Tree Golf Course, because the failure patterns are different. We stock parts locally for the brands that dominate this city’s housing stock: Linear, LiftMaster, and Viking appear on more Antioch driveways than anything else. And every job carries the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument.
Cody Beckman leads our team, and he’s particular about how a job gets left. Shoe covers on. Drop cloths down. A photo of the cleanup before we pull out of the driveway. That’s the Cedarwell C.A.R.E. routine, and it’s not an upsell. It’s how every visit works.
Iron Gate Repair in Antioch
Iron Gate Repair in Antioch most often means addressing what the Delta wind does to wrought iron driveway gates over 15 to 25 years of exposure. The panel itself rarely fails. What fails is everything holding it: hinges that have pulled loose from the post, latch hardware that no longer lines up, and weld points that have cracked from repeated racking. We see it most on the east and north side, where the 1990s tract packages were installed with nearly identical hardware and are now aging out together.
A standard iron gate realignment with hinge replacement in Antioch typically runs $240 to $480. If weld repair is needed at cracked joints, add $80 to $160 per weld point. We always quote the exact number before work begins, so there’s no guessing when the invoice comes.
Hinge and Post Conditions
The hinge post is the anchor everything hangs from. When it shifts even a half-inch out of plumb, the gate sags and the latch won’t catch. We re-set posts with proper footing when it’s structural, and we’ll tell you honestly if a post is too far gone and replacement makes more sense than another patch.
Rust and Corrosion Work
Airborne moisture from the Delta carries a mild brine that eats ferrous hardware faster than you’d expect this far from the ocean. We grind back surface rust, treat the steel, and replace components where the corrosion has compromised strength. Pet-safe lubricants and treatments are standard where there’s a choice, because we know kids and dogs live around these gates.
Sliding Gate Repair in Antioch
Sliding Gate Repair in Antioch typically involves two failure points: the track system and the motor drive. The wind doesn’t hit sliding gates as hard as swing gates, which means the mechanical wear here comes from dust, grit, and age. Antioch’s summer heat also expands metal track components, and gates that ran fine in May can bind by July. We see this on the city’s larger driveway openings, where a sliding gate is often the only practical option.
A sliding gate realignment with roller replacement in Antioch usually runs $220 to $390. If the gate’s drive chain or belt needs replacement, expect $180 to $320 for the part and labor. If the opener control board has failed, that’s typically $280 to $450 depending on the model. You’ll see the full breakdown in writing before we start.
Track Resets and Roller Work
When a sliding gate starts grinding or jumping, the track has usually shifted or filled with debris. We clean the track bed, reset the rail, and replace worn rollers. On Antioch’s older metal gates, the roller housings themselves often crack after 15-plus years, and that’s a straightforward replacement.
Opener Diagnostics on Legacy Systems
Many Antioch sliding gates still run first-generation opener models from the early 2000s. The control boards fail in predictable ways, and we keep common replacements in local stock. When a board is obsolete, we’ll give you the honest math: retrofit cost versus replacement cost, and let you decide without pressure.
Trusted Brands We Service in Antioch
We’re factory-trained on the brands Antioch families actually own, and this city’s housing stock skews heavily toward Linear, LiftMaster, and Viking openers. We also service DoorKing, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. Because we work Antioch’s neighborhoods every week, we know which models are failing in clusters and keep the common control boards, remotes, and safety photocells on hand. That means fewer return trips and faster turnarounds when a gate won’t close at 8 p.m. Call us at (626) 649-4572, and a live person answers. That’s true at noon and at 3 a.m.
Common Gate Repair Problems We See in Antioch Homes
- Delta wind racking wooden panels. Sustained winds through the Carquinez Strait push and pull on gate panels season after season, loosening hinge screws and pulling lag bolts out of the post. The gate then sags, drags, and won’t latch properly.
- First-generation opener control boards burning out. We get calls from whole streets where the same 2003-era swing-gate opener is failing within weeks of each other. The control board fights the wind load constantly, overheats, and dies. Batch repair runs are common here.
- Corrosion on ferrous hardware. Delta moisture and mild brine accelerate rust on hinges, latches, and keypad entry hardware, especially on gates that face west toward the water. Hardware that might last 20 years in Brentwood can fail in 12 here.
- Summer heat expansion and drift. When temperatures push past 100°F, wood panels bow and metal components expand. A gate that was plumb in April can be noticeably out of alignment by August, and most Antioch homeowners first notice it as a latch that no longer catches.
Pricing for Gate Repair in Antioch, CA
Most gate repair calls in Antioch fall between $180 and $480. A simple latch replacement or realignment runs $180 to $260. Hinge replacement with post re-setting typically lands at $240 to $480. Operator control board replacements run $280 to $450. Weld and rust repair adds $80 to $160 per weld point. Full gate replacement starts at $1,200 for a basic wood side gate and $2,800 to $6,000 for a motorized driveway gate, depending on materials and automation. We give you a written price before any work starts, every single visit. Call (626) 649-4572 for a free estimate on your specific gate.
We Also Serve Cities Near Antioch
In addition to Gate Repair in Antioch, our crews handle calls in Oakley, Pittsburg, Clayton, and Brentwood. The failure patterns shift a bit once you move inland from the Delta wind corridor, and we adjust accordingly. Same written-price policy, same cleanup routine, same live person on the phone.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antioch
Because the tract homes on the east and north side were built with nearly identical gate packages, installed on compressed construction timelines. When one first-generation swing-gate opener control board fails from years of fighting the Delta wind, the same model on the same street is usually weeks behind it. We saw three neighboring houses off Hillcrest Avenue lose the same LiftMaster opener within one month. It’s the most predictable failure pattern in Antioch, and it means parts-anticipation and same-neighborhood batch runs save real money. Call (626) 649-4572 and we’ll check your opener model against the cluster we’re already seeing in your area.
Yes, in most cases you can retrofit. If your older gate has decent hinges, a solid post, and a panel that hasn’t rotted or cracked, a modern operator with working safety photocells can be installed without replacing the whole system. We do this routinely on 1990s-era wrought iron gates. The honest exception is when the post itself has shifted or the panel is structurally compromised. Then replacement usually costs less than continuing to patch. We’ll give you both numbers in writing and let you choose.
Sagging is rarely a panel problem. It’s a hinge and post problem. The wind load racks the panel until the hinge screws loosen or the post shifts, and the gate rotates slightly and drops. We re-set the post or replace the hinges and realign the panel. Fixing just the panel without addressing the post means the same sag returns within months. Our realignment work in Antioch runs $180 to $480, depending on whether the post needs re-footing. Call (626) 649-4572 for a written quote.
Yes. Automatic gates in California are required to have functioning safety features, including photocells that reverse the gate when something crosses the path. Many older Antioch systems predate current standards, which is one reason we recommend retrofitting older operators rather than simply repairing the control board. If a child or a pet is in the gate’s path, the photocells need to stop and reverse motion. We check photocells on every automatic gate repair, and we’ll flag it clearly if yours are missing or non-functional.
Because Antioch sits at the western mouth of the Sacramento-San Joaquin Delta. The same wind that funnels through the Carquinez Strait carries airborne moisture and mild brine from the Delta channels. Ferrous hinges, latches, and keypad hardware absorb that exposure year-round, and the corrosion cycle runs noticeably faster than in inland neighbors like Brentwood. We treat rust with corrosion-resistant coatings and use stainless or galvanized replacement hardware on exposed components. A small upgrade at repair time adds years to the hardware’s life in Antioch specifically.
If your gate is sagging, sticking, or won’t open, call Latch & Post Gate Repair at (626) 649-4572. We answer live, 24/7. We’ll schedule the visit, show up on time, put down drop cloths and shoe covers, and hand you a written price before any work begins. Ask for Cody Beckman. The 365-Day Done Right Promise covers every repair, and we clean up before we leave. That’s the job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Antioch since 2009.