Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Savannah
Gate installation in Savannah usually costs between $1,850 and $6,400 depending on whether you need a new driveway gate, a pedestrian gate, or a full automation package. Most Savannah jobs take one to two days once materials clear the Architectural Review Committee, and our crews work across the community every week. We know the builders, the typical gate styles, and the soil problems that show up here. If you’re weighing a repair against a replacement, call (626) 649-4572 and we’ll walk you through both options with real numbers.
Savannah isn’t like working in an unincorporated part of Denton County. The HOA approval layer adds a step, and the black-clay soil under nearly every post adds a complication. Neither one surprises us. We plan for both from the first visit, which is why homeowners here tend to call us when a gate has been sagging for a season or an operator board finally quit. Our Gate Installation team handles the full scope: new gate, new posts, new operator, and the paperwork your HOA wants to see.
Why Latch & Post Gate Repair Is Savannah’s Preferred Gate Installation Company
Savannah homeowners call us because we already know what their gates look like. The community was built fast between 2008 and 2015, mostly by a handful of DFW-area builders who used the same ornamental iron panels and the same operator brands. That means we can often tell you over the phone what board failed, what a replacement costs, and whether the post needs to be re-poured before we even arrive. Cody Beckman runs our team, and he insists on a written price before anything gets touched, so there’s no ambiguity about cost.
We treat the inside of a home with more care than most gate companies bother to show. Shoe covers go on at the door. Drop cloths go down before we walk through with a control panel or a wiring harness. If your kids are napping or you have a dog that startles, we schedule around it. Then we take a photo of the cleanup before we leave. That routine is part of the Cedarwell Care Promise, and it’s not optional on any Savannah job.
Every installation is covered by the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No fine print, no argument. That’s why much of our Savannah work comes from neighbors talking to neighbors.
Gate Installation Services in Savannah
Gate Installation Services in Savannah cover new driveway gates, pedestrian gates, swing gates, sliding gates, and double gates, all built to match the ornamental iron and powder-coated steel profiles the HOA approves. A standard single-swing driveway gate in powder-coated steel typically runs $1,850 to $3,200 installed. A double gate with matching hardware starts around $3,400 and climbs with automation. We quote the full number in writing before any work starts.
Driveway and Double Gate Installs
Most Savannah driveways take a single ornamental iron swing gate, but corner lots and wider approaches often call for a double gate. We order panels from the same local fabricators the original builders used, so the finish and profile match the rest of the street. That matters when your gate faces the ARC review.
Pedestrian Gate Replacement
Pedestrian gates in Savannah take a beating at the latch side, especially on homes where kids use the side gate daily. A new powder-coated pedestrian gate with a heavy-duty latch and fresh hinge posts runs $950 to $1,600 here. If the post is heaving in the clay, we address the footing at the same time instead of hanging a new gate on a tilted post.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Savannah
Electric Gate Installation in Savannah usually means retrofitting an automatic opener onto an existing iron gate or replacing an operator that has failed. The installed price for a new LiftMaster or FAAC swing-arm operator in Savannah runs $1,200 to $2,400, including the photo-eye safety equipment required under UL 325. Full automation packages with a new gate, operator, keypad, and remote controls start around $3,800 and go up with gate width and access control features.
Operator Retrofit on Older Gates
Many Savannah gates were built before modern entrapment-protection standards were fully enforced. If your gate runs on an older FAAC or Linear board with a dead photocell, we replace the board, the limit switches, and the safety edge together so the whole system meets current code. Retrofitting is often cheaper than replacing the gate itself, provided the post is still plumb.
Access Control and Keypads
Some Savannah households want a keypad, a phone-based entry system, or a vehicle sensor on the driveway loop. We install those as part of the operator package or as a standalone upgrade. Written quotes cover every component before we order or install anything.
Trusted Brands We Service in Savannah
We train on the brands Savannah homes actually have: LiftMaster, FAAC, BFT, Linear, DoorKing, Elite, Viking, Ghost Controls, and Mighty Mule. For the 2008-2015 operator generation repeated across this neighborhood, that matters more than most homeowners realize. We stock replacement control boards and limit switches for those specific units, so many Savannah calls are same-day jobs instead of a parts-order delay. DoorKing and Elite are especially common on the wider double gates here. Viking and Ghost Controls show up on the newer estates near the north end of the community.
Common Gate Installation Problems We See in Savannah Homes
- Heaved hinge posts from black-clay soil. Denton County’s Vertisol soil swells when it rains and shrinks in a drought, which slowly tilts gate posts out of plumb. A new gate hung on that tilted post will bind at the latch within months.
- Dead control boards on 2008-2015-era operators. The same LiftMaster, FAAC, and Linear boards repeat across Savannah because the community was built in a narrow window by a few builders. We stock those boards; most competitors order them and push your job out several days.
- Missing or failed safety photocells. Gates installed before current UL 325 expectations often have a dead photo-eye or no edge sensor at all. Any install or operator replacement in Savannah needs those addressed upfront.
- HOA compliance rejections after installation. A gate with an unapproved finish or panel profile can get flagged by the Architectural Review Committee after the work is done. We know the approved vendor list and finish standards for Savannah, so the paperwork gets submitted correctly the first time.
Pricing for Gate Installation in Savannah, TX
A single ornamental iron driveway gate in Savannah runs $1,850 to $3,200 installed. A double gate starts around $3,400. Pedestrian gates land between $950 and $1,600. Electric operators with safety equipment add $1,200 to $2,400 depending on the brand and gate width. The main variable in Savannah is post condition: if the black clay has heaved a hinge post, we include the footing repair in the quote rather than installing on a tilted post and hoping it holds. Every estimate is written, itemized, and free. You’ll see the full number before any work starts.
We also serve Savannah as part of the broader DFW metro, with dispatch coordinated from the Dallas-Fort Worth office. The crews working your street are local to this area, not driving in from another city each morning.
We Also Serve Cities Near Savannah
Our Gate Installation in Savannah coverage extends to nearby communities across North Texas. If you’re just outside Savannah in Aubrey, Prosper, Celina, or Little Elm, we can usually schedule your estimate the same week. We also take jobs in Houston, San Antonio, Dallas, and Fort Worth for larger estate gates and commercial-access work.
Serving Savannah, TX - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Savannah
Yes, in most cases we can retrofit a current LiftMaster or FAAC operator onto an older Savannah gate as long as the hinge post is still plumb and the gate itself is structurally sound. The retrofit includes a new control board, limit switches, and the required photo-eye or edge-sensor safety equipment. If the post has heaved in the clay, we address that first or the new operator will fight the misalignment from day one. Call (626) 649-4572 for a written quote on your specific gate.
Yes, Savannah’s Architectural Review Committee must approve materials, colors, and style before a gate installation is considered complete. We submit the documentation with your chosen finish and panel profile matched to the community’s approved standards, because an unapproved gate can get flagged after install. If you’re unsure what your street allows, we’ll check the current requirements for you before any fabrication begins.
Most of the time in Savannah the sag is the post, not the gate. The black-clay soil under Denton County swells and shrinks with every rain-drought cycle, slowly tilting hinge posts out of plumb. We check the post with a level before recommending anything. If the post is sound, new hinges or a weld repair may be enough. If it’s tilted, the right fix is re-pouring the footing and re-plumbing the post before any new gate goes up.
Yes, we stock replacement boards and limit switches for the LiftMaster, FAAC, and Linear operator generation installed across Savannah between about 2008 and 2015. Because the community was built in a tight window by a small group of builders, the same boards repeat house after house. We can often complete a board swap the same day a competitor would still be waiting on a parts delivery. Call us with your operator model and we’ll tell you if we have it on the truck.
An automatic gate in Savannah must have entrapment protection that meets current UL 325 standards, which typically means working photo-eyes across the gate opening and, on many installs, a contact edge or edge sensor on the closing side. Older Savannah gates often have a dead or missing photocell, so we include replacement safety equipment in every operator install and retrofit. It’s not optional add-on work; it’s part of doing the job correctly.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Savannah since 2009.
If you’re ready to replace a sagging gate or bring an old operator up to code, call (626) 649-4572 for a free written estimate. We’ll walk the gate, check the posts, and put the full price in front of you before any work begins.