Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Maywood
Gate installation in Maywood usually starts with an honest look at what you already have. Most homes here sit on narrow lots with 8 to 10 foot driveway openings, so a standard big-box gate almost never fits without cutting or custom fabrication. We measure, quote a written price, and build to the exact opening on your property. If you need a replacement gate, an automatic opener, or a full new install, call us at (626) 649-4572 and a live person will answer, day or night.
We work in Maywood every week. We know the bungalows off Atlantic Boulevard, the tight driveways near Slauson Avenue, and the patchwork of older iron and steel gates that have been welded, re-welded, and modified over the years. That local knowledge matters because most Gate Installation work here is not a straight swap. It is measuring a 9 foot opening precisely, setting a post that will not heave, and hanging a frame that clears the ground through a full swing.
Why Latch & Post Gate Repair Is Maywood’s Preferred Gate Installation Company
We are a Cedarwell-family gate specialist, and we have focused on gates since 2009. That focus means our technicians are factory-trained on the brands families actually own: Linear, Viking, Ghost Controls, DoorKing, and the rest of the common operators in Maywood. We are not a general handyman service. Every gate comes down to two parts, the latch that holds it and the post that carries it. That is the job we focus on.
When we install or repair a gate in Maywood, the routine is the same every visit. A written price before any work begins. Shoe covers and drop cloths inside the home, plus a photo of the clean-up before the technician leaves. We ask before we move or touch anything, and we can schedule around nap time if quiet matters. That is the Cedarwell C.A.R.E. routine, and it is included on every job, not offered as an upsell.
Every installation is covered by the 365-Day Done Right Promise. If the work is not right, we make it right. No argument, no fine print. Maywood homeowners call us back because the gate actually swings true and the crew left the driveway cleaner than they found it.
Automatic Gate Installation in Maywood
Automatic gate installation in Maywood means pairing a new or existing gate frame with an operator that can handle the city’s narrow openings and older hardware. A typical automatic gate installation in Maywood runs $2,800 to $5,500, depending on whether we are automating an existing manually-swung gate or building a new frame with the operator included. You will see the exact number in writing before we touch anything.
Automating an Existing Gate
If your current gate is structurally sound, we can usually add an operator without replacing the whole frame. Many Maywood gates were built years before modern safety requirements existed, so this work often includes adding a safety photocell, adjusting hinge alignment, and setting the post if it has shifted. A mismatched operator bolted on by a previous handyman is common here, and correcting that is part of doing the job right.
New Automatic Gate Builds
When the old gate is too far gone, or the post has cracked beyond repair, a new build makes sense. We fabricate the frame to your exact driveway width, set new hinge and latch posts in fresh concrete, and install the operator with proper safety edges and photocells. Most new automatic gate installs in Maywood take one to two days on site.
Gate Installation Services in Maywood
Gate installation services in Maywood cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A standard manual driveway gate replacement in Maywood typically runs $1,800 to $3,400, depending on the frame material, opening width, and whether the existing posts can be reused or need to be replaced. Every quote is a fixed written price agreed before work starts.
Custom Narrow-Opening Gates
Because almost every driveway opening in Maywood is 8 to 10 feet wide, most replacement gates here must be custom-built or cut down rather than ordered in a standard size. We measure to the inch, fabricate the frame to fit, and set the posts so the gate clears the ground evenly across its full swing. Nothing is forced to fit.
Post Setting and Replacement
Heaved or cracked original concrete gate posts are one of the most common things we see in Maywood. Decades of ground movement and vehicle contact shift the post, and the gate starts to sag or drag even when the panel itself looks fine. We saw a welded steel swing gate near Slauson and Atlantic that was literally floating on a cracked hinge post with a mismatched operator bolted on. We cut out the failed post, poured a new footing set plumb, and hung a fabricated frame that fits the original opening. The gate now runs without strain.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Maywood
Our technicians are factory-trained on the operators Maywood homes actually have, including Linear, Viking, Ghost Controls, and DoorKing. We keep common control boards, remotes, and safety components stocked for fast turnaround, so we are not waiting on a warehouse in another state when a Maywood customer needs a board swapped. If an older operator is no longer made, we can often retrofit a compatible current model, and we will explain the cost difference honestly before you decide.
Common Gate Installation Problems We See in Maywood Homes
- Field-welded frames that no standard hardware fits. A high share of Maywood gates have been modified multiple times by unlicensed handymen, often with mismatched steel stock and non-standard hinge placements. That means the off-the-shelf opener or hinge kit from a store will not work without custom fabrication or at-site welding.
- Heaved or cracked original concrete posts. Most of the city’s 1920s to 1950s bungalows still have their original gate posts. Decades of ground movement and vehicle contact crack the footing, and the gate begins to sag or bind even when the panel is sound.
- Oxidation from basin smog and heat. Maywood sits in the landlocked Southeast LA basin where summer highs push into the mid-to-upper 90s and smog accelerates oxidation on bare iron gates more aggressively than in coastal communities. Old welds weaken, hinge points corrode, and a swing gate begins to fail under Santa Ana wind stress.
- Operators bolted onto gates that were never designed for them. We regularly see automatic openers mounted by handymen onto gates that were hung before modern safety requirements existed. The operator strains, the gate binds, and the safety edges are missing or disconnected. Retrofitting honestly is often cheaper than replacing everything.
Pricing for Gate Installation in Maywood, CA
Here is the honest price picture for gate installation in Maywood. A manual driveway gate replacement runs $1,800 to $3,400. An automatic gate installation, whether automating an existing gate or building new, runs $2,800 to $5,500. A post replacement alone, which is a frequent companion job on Maywood’s older lots, usually runs $500 to $900 per post including concrete. What moves the number is your driveway width, the condition of the existing posts, and whether the old frame can be safely reused. Every estimate is free, and the written price you approve is the price you pay. Call us at (626) 649-4572 for an exact figure.
We Also Serve Cities Near Maywood
Our crews work throughout the Southeast LA basin. In addition to Gate Installation in Maywood, we serve Bell, Huntington Park, Bell Gardens, and South Gate. If you live just over the city line, call us and we will schedule the same measuring and written-price visit.
Serving Maywood, CA - Our Local Coverage Area
We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Maywood
In most cases, yes, we can automate an existing wrought-iron or steel gate as long as the frame is structurally sound and the posts are not heaving. We add a safety photocell, align the hinges, and mount an operator from a brand like Linear or DoorKing that matches the gate’s weight and swing. If the old gate is too far gone, we will tell you that plainly and give you a written price for a replacement instead. Call (626) 649-4572 and we will come take a look at no charge.
Yes, this is one of the most common situations we see in Maywood. Field-welded frames with mismatched steel stock and non-standard hinge placements will not accept off-the-shelf operator brackets, so we fabricate a mounting plate and adjust the hinge geometry at the site. The operator is then mounted so it does not bind or strain. This takes longer than a clean retrofit, but it is usually much less expensive than scrapping the whole gate.
A safe automatic gate has a properly installed safety photocell, compliant safety edges where the gate meets the post, and an operator force setting that reverses on contact instead of pushing through. We test all three before we leave, and we are factory-trained on the current safety requirements for the brands we install. If you want us to check an existing gate, call (626) 649-4572 and we will schedule a visit.
The hinge post has almost certainly heaved or cracked. On Maywood’s narrow lots, the original concrete gate posts have often shifted after decades of ground movement and vehicle contact, and the damage is usually below the surface where you cannot see it. Replacing the post and setting a new plumb footing solves the drag. In some cases the gate panel itself has worn enough that it needs to be rehung or replaced.
Yes, and you can see it on bare iron gates all over the city. The landlocked basin heat and elevated smog oxidize bare metal faster than in coastal areas, which weakens welds and hinge points over time. A new installation with proper primer, paint, and galvanized hardware, plus operators sealed against heat, will outlast an unpainted or poorly coated gate by years. That is why we recommend coated frames and sealed components for Maywood installs.
Call Latch & Post Gate Repair for Your Maywood Gate Installation
If you live in Maywood and your gate needs a real fix, call (626) 649-4572. A live person answers 24 hours a day, every day. We will measure your exact opening, give you a written price before any work begins, and send a background-checked, uniformed technician who will put down drop cloths, wear shoe covers, and show you a photo of the clean-up before leaving. Every installation is covered by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Maywood as part of the Cedarwell family since 2009.