Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lomita
Gate installation in Lomita usually takes one to three days from the first measurement to the final walkthrough, and the written price is set before we ever touch a hinge or pour a footing. We know Lomita’s older ranch-style homes on tight lots, and we know the marine air that rolls in from San Pedro. That local knowledge changes how we spec a gate, where we place the operator, and whether we recommend retrofit or full replacement. If you’re weighing options for a driveway gate or a new electric gate, call us at (626) 649-4572 and Cody or a member of the team will walk you through what makes sense for your property.
Why Latch & Post Gate Repair Is Lomita’s Preferred Gate Installation Company
Lomita homeowners call us because we focus on one thing: gates. Not fences, not general contracting. Every gate comes down to two parts, the latch that holds it and the post that carries it, and that’s the job we focus on. We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been at this since 2009. Our technicians are background-checked, uniformed, and factory-trained on the brands families in Lomita actually have: LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and a few others. When we step inside your home, we put on shoe covers and lay drop cloths. Before we leave, you get a photo of the cleanup. That’s the Cedarwell C.A.R.E. routine: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work begins.
We also answer the phone. A live person picks up 24 hours a day, seven days a week. No voicemail, no callback queue. When a Lomita homeowner calls at 9 p.m. because a gate won’t close and the dog is loose, a person answers.
Electric Gate Installation in Lomita
Electric Gate Installation in Lomita often starts with a question: is the existing gate worth automating, or does it need to be replaced first? On Lomita’s postwar lots, that answer depends heavily on rust. Marine air from the Port of Los Angeles saturates the lower rails of west- and southwest-facing gates, and once the bottom 6 inches rust through, no amount of new hardware will keep the gate tracking straight. We assess the gate and the post before we recommend an operator.
Retrofitting Automation on an Older Gate
If the gate steel is sound and the hinge posts are solid, we can retrofit a modern operator onto a 1960s or 1970s gate. The usual job involves a new Linear or LiftMaster arm, safety photocells, and sometimes a loop detector or keypad. On Lomita’s narrow side yards, we often need custom arm positioning so the operator clears the house and the driveway edge. A retrofit typically runs $1,400 to $2,800 in Lomita.
Full Electric Gate Replacement
When the bottom rail is gone or the posts are leaning, replacement is usually the cheaper answer over three years. We remove the old gate, pour new post footings if needed, install a new steel or aluminum gate, and wire the operator with photocells and a keypad. Most full electric gate installations in Lomita run $2,900 to $5,500 depending on gate width, operator brand, and the condition of the existing power run.
Driveway Gate Installation in Lomita
Driveway Gate Installation in Lomita lives or dies on swing clearance. The city’s ranch homes were built tight to the lot line, and many driveways run alongside the house with only a few feet of side yard. A gate that swings into a retaining wall or clips a car mirror isn’t a gate, it’s a problem. We measure the actual swing arc before we order anything, and we build for the driveway you have, not the one in a catalog photo.
Sliding Gates for Narrow Driveways
On Lomita lots where a swing gate physically cannot clear the house or the sidewalk, a sliding driveway gate often makes more sense. The gate rides on a track and roller system and needs a straight run of fence or wall behind the driveway to slide along. This is common on the tighter streets south of Lomita Boulevard. Sliding gate installations in Lomita typically run $3,200 to $6,000, with the track, gate, and operator included.
Double Swing Gates on Standard Lots
For wider driveways, a double swing gate balances the weight across two panels and two posts. It requires two actuators or a single operator with a slave arm, and it demands clean, level hinge points. On Lomita’s older concrete driveways, we check for settling before we commit to post locations. A double driveway gate install runs roughly $3,800 to $7,200 in Lomita.
Trusted Brands We Service in Lomita
We’re factory-trained on the brands families in Lomita actually own, so the right fix happens on the first visit. That list includes Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster and a few others you’ll find on gates across the South Bay. We stock common control boards, photocells, and remotes for these brands locally for our Lomita customers, which means less waiting on parts. If you have an old Viking or DoorKing operator that’s acting up, we can usually tell you over the phone whether it’s worth saving or whether a newer board will do more for your family.
Common Gate Installation Problems We See in Lomita Homes
- Rusted-through bottom rails on west- and southwest-facing gates. Salt-mist pooling and driveway splash eat the lowest 6 inches of metal first. We regularly find 1970s gates that have corroded completely free of their bottom hinge and are hanging from the top hinge alone.
- Worn hinge posts that no longer hold a gate true. Sag correction fails if the post isn’t replaced. A new gate hung on a leaning post will sag again within a year.
- Obsolete control boards in legacy operators. Many older Lomita gates run on boards that cannot support modern safety photocells or loop detectors. Retrofitting automation onto those boards is unreliable without replacement.
- Tight swing clearances on narrow side yards. The postwar lots don’t leave much room. We often need custom arm positioning or a switch to a sliding gate because the swing arc doesn’t clear the house.
Pricing for Gate Installation in Lomita, CA
A standard single swing gate installation in Lomita runs $2,200 to $3,900. A full electric driveway gate with operator, photocells, and keypad runs $2,900 to $7,200 depending on gate width, operator brand, and whether we can reuse your existing posts or need to pour new footings. A retrofit operator install on a sound existing gate runs $1,400 to $2,800. A sliding gate installation runs $3,200 to $6,000. The written price we give you before work starts is the price you pay. No change orders mid-job, no surprise line items. Call (626) 649-4572 and we’ll give you a free estimate with real numbers.
We Also Serve Cities Near Lomita
Beyond Lomita, our Gate Installation team works in Lakewood, Torrance, Carson, and Rancho Palos Verdes. We schedule these jobs the same way: a live person answers the phone, a written price comes before any work, and the crew leaves your property clean. If you’re in a neighboring city, call us at (626) 649-4572 and we’ll coordinate the same C.A.R.E. routine we bring to every Lomita job.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Lomita
Sometimes, and we’ll tell you honestly after looking at the steel. If the bottom rail and hinge posts are structurally sound, we can add a modern operator, photocells, and a keypad to a 1970s gate. In Lomita, the most common deal-breaker is rust through the bottom rail or bottom hinge, and if that’s the case, replacement is usually the smarter spend. Call (626) 649-4572 and we’ll give you a straight answer and a written price either way.
Because marine air from the Port of Los Angeles and San Pedro waterfront carries salt aerosols that pool at the lowest 6 inches of the gate. Driveway splash adds to it, and Lomita’s year-round humidity keeps the metal damp enough to corrode faster than inland gates. We see this pattern on nearly every west- and southwest-facing gate in the city. The fix is usually a new bottom rail or full gate replacement, not another coat of paint.
If the control board is from the 1990s or earlier and will not support safety photocells or a loop detector, it usually cannot be saved in any useful way. We test the board, the motor, and the limit switches before recommending anything. We carry replacement boards for Linear, Viking, Ghost Controls, and DoorKing in the area, so turnaround is often same-week. Call us and we’ll diagnose it over the phone if you can read us the light codes.
Most of the time, yes, but the style may change. Lomita’s postwar lots often leave only a few feet between the driveway edge and the house. A sliding gate may be the only workable option on the tightest side yards. We measure the actual swing arc and the track run before we order anything, and the written quote reflects the gate style that fits your property, not a generic one-size answer.
First, we measure the swing or slide clearance and check the existing posts and power. Then we either reinforce the posts or pour new footings. After that, we hang the gate, mount the operator, wire the photocells and keypad, and test the full cycle several times. On small lots we also check the gate’s arc against your parked cars and the house wall. The whole job is quoted and agreed before any work starts.
If you’re in Lomita and your gate is rusted through, sagging, or just too old to automate safely, call us at (626) 649-4572. Cody or one of the team will answer, listen, and give you a free estimate with a written price before anything happens.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lomita since 2009.