Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Irvine
If you’re searching for gate installation in Irvine, you’re likely dealing with either a gate that’s finally failed after decades of service or a community board that’s ready to replace aging hardware before it fails. A new driveway or sliding gate installation in Irvine typically runs $2,400 to $8,600 depending on the operator, materials, and site prep. The job usually takes one to two days once parts arrive. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been doing this work since 2009. Call (626) 649-4572 and a live person answers, any hour, any day.
Irvine is different from every city around it. The villages here were built in coordinated waves by the Irvine Company, which means your gate isn’t just yours. It’s part of a community-wide generation of hardware, and that changes how we approach installation. Our crews come from the Los Angeles metro office and serve Irvine locally, so we know the neighborhoods, the HOA expectations, and the specific failure patterns these gates develop.
Why Latch & Post Gate Repair Is Irvine’s Preferred Gate Installation Company
Gate installation in Irvine runs on a different clock than in Tustin or Santa Ana. Here, architectural committees review plans before hardware gets ordered. We’ve sat through those reviews. We know what Woodbridge and Northwood boards ask for, and we come prepared with the specs they need: operator model, color match, profile drawings. That preparation keeps a two-week project from becoming a two-month one.
Our Irvine customers tend to tell us the same thing: the written price before work starts is what convinced them. No estimate that balloons. No surprise line items. You see the full number in writing, and we don’t touch anything until you approve it. That’s not a courtesy for us. It’s how Cody Beckman runs every job, including yours.
When we’re inside your home or walking your property, our C.A.R.E. values apply: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time and quiet hours, and explain the price before the work. We put shoe covers on before stepping inside, lay down drop cloths, and we photograph the cleaned site before we leave. If your kids are napping, we’ll use quiet tools. If your dog is nervous, we’ll work around them. Every installation is backed by the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument.
Driveway Gate Installation in Irvine
Driveway gate installation in Irvine often means replacing a swing or slide gate that was installed when the village was first built. In communities like Northwood and Woodbridge, that puts the original hardware at 35 to 45 years old. We pull the old post, inspect the footing, and set the new one before hanging the gate. A full driveway gate installation in Irvine typically runs $3,200 to $8,600, depending on gate width, operator type, and whether we need to add safety photocells or a keypad. You’ll see the exact number in writing before we order anything.
Post Replacement and Footing Work
Santa Ana winds have been pushing against Irvine gate posts for decades. When a post leans even a few degrees, the gate binds and the operator burns out early. We don’t shim a leaning post and call it done. We reset the footing in concrete and level it before the new gate goes on. This is the difference between a gate that lasts 20 years and one that squeaks through its first wind season.
Matching Your Community’s Original Look
Many Irvine villages have CC&Rs that specify the original gate color, profile, and sometimes the brand. Before we order a replacement operator or a new gate panel, we confirm the architectural approval. It’s a step most gate shops skip, and it’s the one that gets homeowners into trouble with their HOA. We handle the paperwork and the matching so your new gate looks like it belongs.
Sliding Gate Installation in Irvine
Sliding gate installation in Irvine is the most common job we do in older villages, where driveways were built for vehicles that slide a gate along a track rather than swinging it open. These gates are quieter to operate but harder on their hardware: the rack gear and rollers wear, the track gathers debris, and the motor strains as the gate ages. A new sliding gate installation in Irvine generally runs $2,800 to $7,500, including a new operator, track alignment, and safety edges. The price is agreed before work starts, and that’s the price you pay.
Track, Roller, and Operator Replacement
When we install a sliding gate, we’re not just hanging a panel and plugging in a motor. We check the concrete pad, clear the track, replace worn rollers, and set the rack gear so the gate moves smoothly from day one. If your old operator died, the cause is usually in the track or rollers, not the motor itself. Fixing the source means your new operator isn’t fighting the gate every time it cycles.
Safety Photocells and Vehicle Detection
Modern sliding gates need UL 325 safety features: photocells that stop the gate if a person or pet crosses the path, and non-contact sensors that keep it from closing on a car. We include these on every new sliding gate installation in Irvine. If your community’s board is reviewing plans, we provide the spec sheets they ask for. Your family and your delivery drivers stay safe.
Trusted Brands We Service in Irvine
Our technicians are factory-trained on the brands Irvine homeowners actually have, including LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t guess at wiring diagrams. We carry common parts for these brands on our trucks, which means fewer trips back to the shop and faster installs for Irvine customers. If your community’s original spec calls for a particular operator, we match it. If you’re replacing an old FAAC or early LiftMaster unit, we’ll tell you honestly whether a retrofit is smart or whether replacement is the cheaper five-year answer.
Common Gate Installation Problems We See in Irvine Homes
- Santa Ana wind damage to pivot hardware. Fall and winter gusts routinely hit 50 to 60 mph in Irvine, bending hinges and knocking gates out of alignment. Any new operator we install is rated to hold position against those winds without burning out.
- Whole-street hardware failures. Because Irvine Company villages were built in waves, entire streets in Woodbridge and Northwood still run the same generation of FAAC and early LiftMaster units. When one fails, the neighbors’ units are usually months behind. We flag this for boards so they can plan before the next failure.
- Architectural committee rejections. A perfectly good operator can be rejected because it doesn’t match the original color or profile specified in the CC&Rs. We confirm approval before ordering parts, which saves you money and keeps the HOA off your back.
- Dry-climate operator wear. Irvine’s Mediterranean climate dries out operator grease faster than the humid coastal cities just west. We use high-temperature, long-life lubricants rated for this climate, and we set realistic service intervals so your gate doesn’t fail mid-cycle.
Pricing for Gate Installation in Irvine, CA
We quote honest numbers because that’s what lets you make a decision. A pedestrian gate installation in Irvine runs $500 to $1,800. A single driveway swing gate with a new operator runs $3,200 to $6,500. A sliding gate runs $2,800 to $7,500, and a double gate runs $4,500 to $8,600, depending on width and hardware. What changes the price: post footing condition, operator type, safety edges and photocells, keypad entry, and whether your HOA requires a specific brand or finish. You get the exact written price before we start, and we never pressure you to accept it. Call (626) 649-4572 and we’ll walk you through what your specific job would cost. The estimate is free.
We Also Serve Cities Near Irvine
Our crews cover Irvine and the surrounding areas, including Tustin, Santa Ana, Orange, and Villa Park. If you’re in one of those cities and need Gate Installation work done carefully, the same C.A.R.E. routine and 365-Day Done Right Promise apply. Call (626) 649-4572 and a live person will schedule your visit.
Serving Irvine, CA - Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Irvine
In many cases, yes, you can retrofit a new operator onto an existing slide gate. The deciding factors are the condition of the track, rollers, and post footings, plus whether your HOA’s architectural guidelines require matching the original operator’s color, profile, or brand. If the track and rollers are sound and the gate panels are straight, a retrofit runs $1,800 to $3,400. If the post is leaning or the track is shot, a full gate installation is usually the cheaper three-to-five-year answer. Call (626) 649-4572 and we’ll assess it honestly.
It adds anywhere from one to four weeks in most Irvine villages. Boards meet on schedules, and some require the operator’s spec sheet, color sample, and profile drawings before approval. We prepare those documents for you and we don’t order parts until approval is confirmed. That’s the honest way to do it. Skipping approval means risking a rejection and eating the cost of the wrong hardware.
Yes. Every new sliding or swing gate we install includes UL 325 safety devices: photocells that reverse the gate if a person or pet crosses the path, non-contact sensors for vehicle detection, and safety edges on the gates that could pinch. We’ll provide the compliance documentation your HOA or insurance carrier asks for, and we test each safety feature before we leave.
Only if the gate and operator aren’t set up for them. We install operators rated to hold position against 50 to 60 mph gusts, and we set posts in concrete footings deep enough to resist wind load on the gate face. The vulnerability is usually a gate that was under-specified, not the wind itself. In Irvine, that’s a spec problem we solve at install.
Once an operator is 25 to 35 years old, the control board, gears, and motor are all reaching end-of-life. Repairing one component now usually means paying for the next one within a year. A replacement operator for a standard Irvine driveway gate runs $900 to $2,200 installed, and you get a new board, motor, and gears with a warranty. Repairing the old unit piecemeal can easily pass that total with no warranty on the parts. Call us at (626) 649-4572 and we’ll give you the straight numbers for your specific unit.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Irvine since 2009.
Get a Free Estimate for Gate Installation in Irvine
We’ll send a technician to your Irvine home, assess your gate and site, and hand you a written price before you commit. That’s the way every job with us works. It’s backed by the 365-Day Done Right Promise, and the crew will leave your floors clean, your family undisturbed, and a photo of the cleaned-up site on file. Call (626) 649-4572 now. A live person answers, and your estimate is free.