Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Highland Village
A new driveway gate in Highland Village typically runs $4,200 to $11,500 installed, and an electric gate operator replacement usually lands between $1,800 and $3,900. Those are the numbers we quote most often for this specific market, where lakefront properties and older custom homes each bring their own set of conditions. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been installing and repairing gates since 2009. When you call (626) 649-4572, a live person answers, day or night, and we’ll schedule a free measure and written price before any work begins.
Highland Village sits right on the western shore of Lake Lewisville, and that water changes how gates behave here. The humidity off the lake keeps iron and steel in a near-constant state of oxidation stress, and the clay-heavy fill lots around Highland Shores and the lakeside corridors heave through wet springs and dry summers. We know what that does to hinge posts, drive gears, and control boards because we see it every week. A gate in Highland Village is not the same job as a gate in Flower Mound, and the difference is about ten miles and a lot of moisture.
Why Latch & Post Gate Repair Is Highland Village’s Preferred Gate Installation Company
Homeowners in Highland Village call us because we stay focused on one thing: gates. We don’t do general handyman work, and we don’t split our attention across a dozen trades. Every visit starts with a written price, and every technician is background-checked and uniformed. Before we step inside your home or walk your driveway, we put on shoe covers and lay drop cloths where the work happens. You’ll get a photo of the cleanup before we leave, because the Cedarwell C.A.R.E. values are part of how we operate: Clean up like it is our own home, Ask before we move or touch anything, Respect your time and quiet hours, and Explain the price before the work.
Cody Beckman leads our team, and he’s built the company around a simple standard: if the installation isn’t right, we make it right under the 365-Day Done Right Promise. No argument, no fine print. That promise covers every gate we hang, every operator we wire, and every post we set in the ground across Highland Village. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Highland Village locally.
We answer calls around the clock. That matters when a gate won’t open at 6:30 a.m. and you need to get kids to school, or when the operator starts grinding at 10 p.m. and you want someone on the phone who can tell you whether it’s safe to leave it. A live person picks up, every time.
Electric Gate Installation in Highland Village
Electric Gate Installation in Highland Village means more than hanging a gate panel, because the operator and its safety systems are doing the real work. A typical electric gate installation here runs $3,800 to $9,600, including the operator, wiring, photocells, and the gate itself. The first thing we assess is the condition of the existing post and the type of soil it’s set in. In lakeside neighborhoods, clay heave can push a post out of plumb by late spring, and if we bolt a new operator onto a moving post, the gear strips and the gate drags. That’s a failure we’re specifically trying to prevent, not bandage.
Operator Selection and Safety Compliance
We install operators built by brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Highland Village, we lean toward operators with sealed control boards and corrosion-resistant housings because the lake humidity here is unforgiving. Every electric gate we install includes working UL 325 entrapment protection, meaning safety photocells and edge sensors that stop the gate if a child, pet, or car is in the path. Older gates hung before those standards existed often can’t be retrofitted safely, and we’ll tell you honestly when replacing the operator is the cheaper long-term answer.
Wiring and Power Runs
Most Highland Village gates need a dedicated power run from the house or a new low-voltage line trenched from an existing source. We handle the full run, from the panel to the operator, and we’ll show you the trench path before we cut anything. The price you see in writing includes that power work, so there’s no second invoice for “electrical” after the gate is already bolted down.
Driveway Gate Installation in Highland Village
Driveway Gate Installation in Highland Village usually means a swing gate on a custom home or a sliding gate on a wider entry, and the cost lands between $4,200 and $11,500 depending on width, material, and whether we’re replacing an old post or setting a new one. The housing stock here skews toward custom and semi-custom homes built from the late 1980s through the 2000s, and a high percentage of those homes have automated wrought-iron or steel driveway gates as a standard feature. That means we’re often replacing a gate that has been there for twenty or thirty years, and the old operator is frequently discontinued.
Swing Gates and Post Footings
A swing gate is only as good as the post that carries it. In Highland Village, the expansive black clay of Denton County heaves significantly during wet North Texas springs and cracks during summer drought, shifting gate posts out of plumb and causing automated gates to drag, bind, or gap. For lakeside properties especially, we pour deeper footings than the regional norm and use a stiffened post base when soil conditions warrant it. That’s not an upsell; it’s the difference between a gate that clears the driveway and one that scrapes it every April.
Driveway Gate Materials and Style
Highland Village homeowners tend to want ornamental iron that matches the home’s architecture, and we can match existing scrollwork and finial styles closely. We’ll also talk you through the practical side: a solid steel panel catches wind off Lake Lewisville, which adds load to the operator. A more open design breathes better and lasts longer against the lakeside humidity. The choice is yours, but you’ll hear our honest recommendation before we order anything.
Trusted Brands We Service in Highland Village
We’re factory-trained on the equipment that’s already hanging on Highland Village homes: Viking, Ghost Controls, and DoorKing show up frequently on lakefront properties, and we keep common boards, remote kits, and safety parts on the truck. That means a faster turnaround than waiting on a distributor. When a Ghost Controls operator from the 2000s fails, we’ll know within the first visit whether we can source the board or whether the whole unit needs replacement, and we’ll put that answer in writing before you spend a dollar.
Common Gate Installation Problems We See in Highland Village Homes
- Discontinued control boards on 1990s and 2000s automatic gates. Lake humidity works into the housing and corrodes the board over years, and once the manufacturer stops producing that board, you can’t order a replacement. A full operator replacement is usually the honest fix, and our Gate Installation team can handle the swap in a single visit.
- Clay-soil heave pushing hinge posts out of plumb. Lakeside neighborhoods like Highland Shores see this every spring: the post tilts just enough that the swing panel tips and binds instead of clearing the driveway. We reset the post with a deeper footing, then re-hang the gate true.
- Gates hung before modern safety standards. Many older Highland Village gates have no working photocells or edge sensors, which means an automated gate won’t stop if someone is in its path. That’s a real entrapment risk, and UL 325 compliance is not optional on a new installation.
- Stripped rack-and-pinion drive gears. The constant shrink-swell of lakefront clay fill puts repeated drag on the drive gear, and by late spring, that gear can strip out entirely. The gate then grinds or won’t move under its own power, and the operator has to come out anyway.
Pricing for Gate Installation in Highland Village, TX
A pedestrian gate in Highland Village typically runs $1,400 to $3,600 installed, a single swing driveway gate $4,200 to $7,800, and a double driveway gate $7,500 to $11,500. Electric operator replacement lands between $1,800 and $3,900. What moves the number is not mystery: gate width, whether we’re setting a new post or reusing a sound one, and the condition of the existing wiring. You’ll see the exact figure in writing before any work starts, and we don’t start until you’ve agreed to that number. Estimates are free. Call (626) 649-4572 and we’ll set up a measure at your Highland Village home.
We Also Serve Cities Near Highland Village
While this page is focused on Highland Village, our crews also handle gate installation for homeowners in Houston, San Antonio, Dallas, and Fort Worth. If you’re in one of those cities and wondering whether we cover your neighborhood, call us. We’ll tell you straight up.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Highland Village
Highland Village sits directly on the western shore of Lake Lewisville, so the humidity off the water stays in contact with gate hardware year-round. That moisture accelerates rust on ornamental iron and corrodes automated gate operators and circuit boards far faster than the inland air in Lewisville proper. Homes in the lakefront corridors see the worst of it, and we factor that into every operator recommendation we make here.
Sometimes, but only if the post is still plumb and the drive gear hasn’t already stripped. The wet springs here heave the clay, the post tips a few degrees, and the gate panel binds against the driveway. If we catch it before gear damage, we can reset the post and re-hang the gate. Once the rack-and-pinion gear is stripped, the operator is done, and retofitting it would just strand you with a gate that fails again next spring.
Yes. Every electric gate installation we do in Highland Village includes working safety photocells and edge sensors that stop the gate if something is in the path. Older gates that predate UL 325 often can’t be retrofitted safely, and when that’s the case, we’ll recommend full replacement rather than leaving your family with a gate that doesn’t stop when it should.
In many cases, no, and we’ll be honest about that on the first visit. The operators installed on late-1980s and 1990s Highland Village gates are frequently discontinued, and the lake humidity has often already corroded the board beyond repair. We’ll check availability while we’re standing there, and if the part is gone, we’ll quote you a full replacement with current safety systems rather than sending you to hunt for used boards online.
Yes, in most lakeside lots. The clay-heavy fill near the shoreline holds moisture from Lake Lewisville and goes through a shrink-swell cycle that inland Flower Mound doesn’t experience the same way. A standard footing can heave out of plumb within a few wet seasons. We pour deeper footings and stiffen the post base where the soil warrants it, which isn’t standard on every Highland Village property but is common on the lakefront corridors.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Highland Village since the company’s founding in 2009.
If you need a new gate, a replacement operator, or an honest answer about whether your existing setup can be saved, call (626) 649-4572. We’ll schedule a free measure at your Highland Village home, give you a written price, and treat your property like our own.