Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Lauderdale
Gate installation in Fort Lauderdale means planning for two things most cities never deal with: salt air from 300-plus miles of inland canals, and long, wide entrances that need real power to move. A typical driveway gate installation here runs $2,800 to $7,500, and a sliding gate usually lands between $3,500 and $9,000 depending on width, material, and operator. We’ll give you a written price before any work starts, and you’ll see exactly what’s included. Call (626) 649-4572 for a free estimate.
Our crews know Fort Lauderdale’s neighborhoods, its canal-front lots, and the way humidity here shortens the life of cheap hardware. We spec materials for this specific climate, not for a generic Florida postcard.
Why Latch & Post Gate Repair Is Fort Lauderdale’s Preferred Gate Installation Company
We’re a Cedarwell-family gate specialist, and we’ve been doing gate work since 2009. That matters in Fort Lauderdale, where a gate that survives in Orlando will fail here in half the time. The difference is knowing what to install from day one: marine-grade aluminum hinges, sealed NEMA-4X operator enclosures, and post footings sized for hurricane wind loads.
We treat your property the way we’d want ours treated. Shoe covers go on before we step inside. Drop cloths go down on your floors. We ask before we move anything, and we take a photo of the clean-up before we leave. If you have kids napping or a dog who startles at loud tools, tell us and we’ll work around it.
Every call is answered by a live person, 24 hours a day, seven days a week. No voicemail tree, no callback queue. And every gate installation we do in Fort Lauderdale is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
Driveway Gate Installation in Fort Lauderdale
Driveway Gate Installation in Fort Lauderdale starts with one question: what’s the gate anchored to? On canal-front lots and older 1950s-1970s ranch homes, we often find the existing post footing is undersized or corroded. We set new concrete footings, square the posts, and hang the gate so it swings true on day one and stays true through hurricane season.
A standard single swing driveway gate in Fort Lauderdale runs $2,800 to $5,500 installed, including the operator. Wider double gates, which are common in the Isles and Coral Ridge, run $4,500 to $7,500. The exact number goes in writing before anything is ordered.
Wide Driveways and Double Gates
Double gates carry more wind load than single gates, and Broward County’s wind-load ratings apply to gate structures, not just the house. We size the operator for the full weight of the leaves and add a center drop rod or cane bolt where the two leaves meet so the gate doesn’t blow open in a storm.
For canal-front homes with wide driveways, we also spec hinge hardware rated for salt exposure. Standard zinc hinges fail here in two to three years. Marine-grade stainless lasts far longer and doesn’t seize up.
Solar Power for Gates Far From the House
Long driveways along the New River or out near the agricultural edges of western Broward often have no power run to the gate. Running conduit that far is expensive, and sometimes impossible without tearing up landscaping. A properly sized solar gate opener with a sealed battery box handles this cleanly. We’ll spec the panel and battery for the gate’s weight and the number of cycles you actually use each day.
Sliding Gate Installation in Fort Lauderdale
Sliding Gate Installation in Fort Lauderdale is the right call when a driveway slopes upward from the street, or when a swing gate would block the sidewalk or a neighbor’s sightline. A slide gate rides on a steel track and moves sideways instead of arcing out, which keeps the full driveway clear for cars, boats, and delivery trucks.
A single sliding gate in Fort Lauderdale typically runs $3,500 to $7,000 installed. Wider commercial-style slide gates for acreage or shared access start around $6,000 and go up from there. The steel track, the roller trucks, and the operator all need to be sized together, and we stock the common parts locally so a slide gate install doesn’t sit waiting on freight.
Sizing the Operator for the Gate’s Real Weight
Slide gates are heavier than they look, especially ornamental aluminum or wrought-iron styles common in Fort Lauderdale’s waterfront communities. An undersized operator burns out its motor in a year or two. We calculate the gate’s actual panel weight, add for wind resistance, and choose an operator rated above that number, not right at it.
For canal-side installations, we use sealed NEMA-4X operator enclosures as the baseline. It costs a little more up front and saves a control board replacement every couple of years. Your written quote will show that line item so you can see where the money goes.
Track Work on Sandy or Uneven Ground
Fort Lauderdale’s sandy soil settles. A slide gate track laid on uncompacted soil will dip, bind, and eventually tear the roller trucks off the gate. We pour a continuous concrete track bed with rebar, then set the track level. The gate should glide with one hand before the operator is even mounted. If it doesn’t, we re-level it rather than letting the motor force it.
Trusted Brands We Service in Fort Lauderdale
Our technicians are factory-trained on Linear, Viking, and Ghost Controls equipment, among others. We keep replacement arms, boards, and safety photocells for these brands stocked locally, which means a Fort Lauderdale install doesn’t wait on a part shipped from out of state. Our Gate Installation team works on new installs and retrofits alike, and we’ll match the operator to your gate’s weight, not to whatever’s on the shelf. Your written price names the exact brand and model before anything is ordered.
Common Gate Installation Problems We See in Fort Lauderdale Homes
- Canal-side salt air on steel hinge posts. In neighborhoods like Rio Vista and the Isles, uncoated steel hinges and weld joints corrode in two to three years, causing swing gates to sag and bind. We spec marine-grade aluminum or stainless hardware from the start.
- Hurricane wind loads warping wide gate frames. Broward County requires gate structures to meet wind-load ratings. After a strong storm, we often find anchor bolts loose and frames slightly twisted, which is why we set deeper footings and add mid-rail supports on wide gates.
- Undersized solar operators on long driveways. A small solar panel and battery can push a light pedestrian gate, but not a heavy farm-style gate. We size the panel array and battery bank for the gate’s true weight and daily cycle count, then test it across several cloudy days.
- HOA keypad and access control requirements. Many Fort Lauderdale gated communities have specific requirements for keypads, remote codes, and entrapment protection. We install UL 325-compliant safety photocells and coordinate with your HOA’s specs so the gate passes inspection the first time.
Pricing for Gate Installation in Fort Lauderdale, FL
Here’s what gate installation costs in Fort Lauderdale’s market. A single driveway swing gate with an operator runs $2,800 to $5,500. A double swing gate runs $4,500 to $7,500. A sliding gate, installed with a concrete track bed and operator, runs $3,500 to $9,000 depending on width and weight. Solar power adds $800 to $2,200 depending on panel and battery sizing. All of these include the written price before work starts, shoe covers and drop cloths, and the clean-up photo.
The biggest cost drivers are gate width, material (aluminum vs. wrought iron), whether we need to pull new electrical, and whether the operator is AC-powered or solar. You’ll see the exact figure in writing before we touch anything, and that number is the number you pay. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Fort Lauderdale
Our Gate Installation in Fort Lauderdale service area extends to Plantation, Pompano Beach, Hollywood, and Coconut Creek. If you’re in one of those cities, give us a call and we’ll schedule a free measure. The canal-side corrosion issues we see in Fort Lauderdale are just as present in those neighboring communities, and we spec for them the same way.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fort Lauderdale
Fort Lauderdale’s 300-plus miles of inland canals carry salt air through residential neighborhoods like Rio Vista, Coral Ridge, and the Isles, so your gate hardware sees marine exposure even if you can’t see the ocean. Canal-front properties in the Isles of Rio Vista can show hinge corrosion and operator board failures in as little as two to three years on uncoated steel gates. That’s why we spec marine-grade aluminum hinges and sealed NEMA-4X operator enclosures as the default, not an upgrade. Call (626) 649-4572 and we’ll assess your property’s actual salt exposure and write a quote around it.
Yes, and this is a common situation on acreage and longer canal-front lots in Fort Lauderdale. A properly sized solar gate opener with a sealed battery bank runs the gate off sunlight, with no need to pull mains power. The key is sizing the panel and battery for the gate’s actual weight and your daily open-close cycles, because an undersized solar system will burn out the motor. In one Isles of Rio Vista install, we replaced a rusted steel swing gate and set a Ghost Controls solar opener with a sealed enclosure because pulling mains power to the gate was impractical. Call us at (626) 649-4572 and we’ll tell you if solar works for your gate.
The hinge post needs a deep, properly cured concrete footing and the gate needs a wheel or mid-rail support so the weight isn’t all cantilevered off one post. In Fort Lauderdale’s sandy soil, a shallow or undersized footing shifts over time and the gate sags until it drags on the ground. We set footings below the soil’s active movement zone, square the post, and add a support wheel or drop rod on wide gates. The written quote includes the footing depth and concrete volume so you can see what you’re paying for.
Every automatic gate we install meets UL 325 entrapment protection requirements, which means safety photocells across the gate opening and proper force settings on the operator. This isn’t optional and it isn’t a line item we skip. On the Isles of Rio Vista job mentioned above, we added a safety photocell to satisfy UL 325, and the owner now runs the gate with keypad entry for visitors. A gate is a moving wall, and a child or a dog in the wrong place at the wrong time should stop it every time.
Yes. Fort Lauderdale and Broward County have a high concentration of HOA-governed gated communities, and their specs often require specific keypad entry systems, remote code formats, and entrapment protection. We coordinate with your HOA’s requirements from the first measure visit so the installation passes inspection without a redo. You’ll get a written price that includes whatever your HOA mandates, and we’ll handle the paperwork side.
Get a Written Price for Your Fort Lauderdale Gate Installation
A gate installation in Fort Lauderdale should be planned for salt air, wind loads, and the real weight of the gate, not just bolted together and left to fail. We’ll walk your property, measure the opening, check the existing footing or set a new one, and give you a written price before anything is ordered. Call (626) 649-4572 any time. A live person answers, and we’ll schedule your free measure. If the job isn’t done right, the 365-Day Done Right Promise means we make it right. That’s how we work in Fort Lauderdale.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fort Lauderdale since 2009.