Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
Gate installation in Everman usually runs between $1,850 and $6,400 depending on the gate type, material, and whether we’re replacing an old post or starting fresh. Most Everman jobs we quote include resetting the hinge post below the active clay layer, which is the single biggest factor in whether a gate lasts three years or fifteen. We’re the Gate Installation team at Latch & Post, part of the Cedarwell family, and we’ve been doing this work since 2009. If you’re in Everman and watching a gate scrape the driveway or swing open on its own, call (626) 649-4572 and we’ll give you a written price before anything gets touched.
Why Latch & Post Gate Repair Is Everman’s Preferred Gate Installation Company
Everman’s housing stock is mostly modest single-family homes built between the 1950s and 1980s, and a lot of those original gates have been fighting Tarrant County clay for four decades or more. We know what that fight looks like, because we’ve seen it on blocks off Enon Avenue, around Everman High School, and along the older streets near Joe Pool Lake’s western edge. Our technicians show up in uniform, background-checked, and trained on the brands Everman families actually own, including Ghost Controls, Viking, and DoorKing.
What sets us apart is how we leave the house. We follow the Cedarwell C.A.R.E. values on every job: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, and Explain the price before the work. That means shoe covers and drop cloths before we step inside, a cleanup photo before we leave, and a written price in your hand before any work begins. No pressure, no surprises.
Cody Beckman leads our team, and he’s built the business around one rule: every gate comes down to two parts, the latch that holds it and the post that carries it. If either one is wrong, the gate fails. That’s the job we focus on, and it’s why Everman homeowners call us when a gate has sagged, dragged, or simply given up.
Driveway Gate Installation in Everman
Driveway Gate Installation in Everman is the most common project we take on, and it usually ranges from $2,400 to $5,800 for a single swing gate made of welded tubular steel. The price depends on gate width, whether we’re automating it, and what’s happening underground at the hinge post. Most Everman homes on narrow lots along streets like Enon Avenue or near Jellico Park need a gate in the 10- to 14-foot range, which keeps material costs predictable.
Swing Gate and Double Gate Work
When a driveway is wide enough for two cars, a double swing gate often makes more sense than a single oversized panel. Pricing for a double gate in Everman typically lands between $3,900 and $6,400, including new posts set below the active clay layer. We quote the exact number in writing before we start, and the 365-Day Done Right Promise covers the installation. If it isn’t right, we make it right, no argument and no fine print.
Pedestrian and Security Gate Options
A separate pedestrian gate is a practical add-on for Everman families with kids, dogs, or frequent foot traffic. These smaller gates typically cost between $850 and $1,700 installed, depending on the hardware and whether the frame is new or retrofitted to an existing fence line. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters.
Sliding Gate Installation in Everman
Sliding Gate Installation in Everman runs from $2,800 to $6,200 for a single-track cantilever or V-track slide gate, and it’s often the right call for properties where a swing gate would eat too much driveway space. Everman lots are compact, and on many 1960s and 1970s blocks, a sliding gate is the only way to close off a driveway without blocking the garage apron or a sidewalk. The pre-1980s housing stock here rarely left room for a gate to swing.
Cantilever Slide Gates
A cantilever slide gate floats above the ground, so it doesn’t care if the clay heaves underneath it. That’s a real advantage in Everman, where coffee-can footings and seasonal soil movement kill post-mounted hardware. Expect to pay $3,600 to $6,200 depending on the opening width, and expect the installation to include a concrete grade beam that runs behind the fence line.
V-Track Slide Gates
A V-track slide gate costs a little less, usually $2,800 to $4,500, but it rides in a ground rail that needs to stay clean and level. On Everman driveways with a smooth concrete apron, it’s a fine choice. On uneven ground or gravel, we’ll usually steer you toward a cantilever design instead. Either way, the written price includes the rail, the rollers, and the posts set to depth.
Trusted Brands We Service in Everman
We’re factory-trained on the gate operator brands that show up most often in Everman: Ghost Controls, Viking, DoorKing, and Elite. If you’re replacing an old operator or adding automation to a new gate, we can match the right board and remote kit to your existing hardware. Because we stock common parts locally for Everman customers, turnaround on operator swaps is usually fast, without waiting on a distributor three states away. We don’t claim to work on brands outside our training list. That keeps the fix right the first time we touch it.
Common Gate Installation Problems We See in Everman Homes
- Heaved hinge posts. Tarrant County’s expansive black clay shrinks in summer droughts and swells after heavy rain. A post set in a shallow coffee-can footing can rise two to three inches after a wet spring, leaving the gate dragging or swinging open on its own.
- Failed hardware on original fencing. Many Everman homes still carry chain-link or basic tubular steel gates from the 1960s and 1970s. The hinges, drop rods, and latch posts are decades past their service life, and the panel usually fails at the hinge post before it fails anywhere else.
- Legacy operators with dead control boards. Older slide and swing gate operators often have obsolete boards and no working safety photocell. If the UL 325 entrapment protection can’t be verified, retrofitting usually costs more than replacing the operator.
- Freeze damage from hard winters. The February 2021 freeze delivered shock loads that cracked aging welds and bent frames, especially on gates already stressed by summer heat. We still see those failures walking into Everman backyards today.
Pricing for Gate Installation in Everman, TX
A standard driveway gate installation in Everman typically runs between $2,400 and $5,800. Sliding gates land between $2,800 and $6,200, and double gates between $3,900 and $6,400. Pedestrian gates are the most affordable at $850 to $1,700. Three things move the number: gate size, automation, and whether the existing post footings are deep enough to hold against the clay. On older Everman blocks, we almost always quote a post reset, because shallow footings fail every few years until the depth is corrected. You’ll see the exact number in writing before we touch anything, and every install is covered by the 365-Day Done Right Promise. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Everman
While this page is focused on Gate Installation in Everman, our crews also cover nearby communities across the metro. We schedule work in Houston, San Antonio, Dallas, and Fort Worth, with dispatch coordinated from the brand’s Dallas-Fort Worth office. If you’re outside Everman but nearby, call us and ask. We’ll tell you straight whether we can get to you.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Everman
Because the hinge post is almost certainly sitting in a shallow coffee-can footing that gives Tarrant County’s expansive clay almost no resistance. After a wet spring, the post heaves two to three inches, and the gate drags again. The only permanent fix is resetting the post below the active clay layer. Shimming or re-hanging a gate on the old footing just starts the clock over. Call (626) 649-4572 and we’ll quote the post reset in writing, no pressure.
Sometimes yes, and we’ll tell you honestly which way the math points. If the gate panel is solid, the hinges aren’t wallowed out, and the post is plumb, a new Ghost Controls or Viking operator can often bolt onto the existing structure. But if the frame is bent, the hinge post has heaved, or the panel is patched together, replacement is usually cheaper than fighting forty years of wear. We’ll show you both numbers in writing before you decide.
For most older operators with an obsolete control board and no working safety photocell, replacement is the cheaper answer. Once the UL 325 entrapment protection can’t be verified, the parts bill and labor on a retrofit usually exceed the cost of a new DoorKing or Elite unit. We’ll test the board and give you a straight answer, with the replacement price in writing first. Call (626) 649-4572 and we’ll schedule a look.
Yes, and those lots are exactly why sliding gates are so common in Everman. When the driveway is tight against the house or a sidewalk, a swing gate just doesn’t have room to open. A cantilever slide gate rides along the fence line instead, so the driveway stays clear. We measure the setback, the approach, and the concrete, then quote the job in writing, same as every visit.
The two things that matter most are post footing depth and hardware quality. In Everman, that means digging the hinge post below the active clay layer, not pouring a shallow plug that heaves every wet spring. We also spec galvanized hardware and factory-trained operator wiring so the first fix holds. The 365-Day Done Right Promise covers it all, and you’ll see the plan on paper before we dig one hole. Call (626) 649-4572 for an honest quote.
Call Latch & Post Gate Repair in Everman
If your gate is dragging, sagging, or swinging open on its own, we’re ready to look at it. Our Everman crews work to the Cedarwell Care Promise: a written price before anything starts, shoe covers and drop cloths inside your home, and a cleanup photo before we leave. A live person answers the phone around the clock, including nights, weekends, and holidays. Call (626) 649-4572 and tell us what your gate is doing. We’ll tell you what it’ll cost.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists.