Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Edison
A new driveway gate in Edison typically runs $3,200 to $9,800 for a standard single-panel swing gate on a poured pier, and $4,800 to $14,500 for a sliding gate with automation. Most installations take one to two days, and we give you the written price before any work starts. That’s the honest range for this market, and you’ll see your exact number before we touch anything.
We’re Latch & Post Gate Repair, and we work exclusively with gates. Our crews know the difference between a poured frost-depth pier and a shallow footing set into an existing Edison driveway, because we see both every week. If you’re off Oak Tree Road, Amboy Avenue, or Route 1, we’re already familiar with the housing stock and the gate problems that come with it. Call (626) 649-4572 for a free estimate and a straight answer on what your gate will cost.
Why Latch & Post Gate Repair Is Edison’s Preferred Gate Installation Company
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and that narrow focus changes how we work in Edison. We’re not a handyman service fitting fence posts on the side. We’re a Cedarwell-family gate specialist, independently owned and operated, and we’ve been at this since 2009.
When we come to an Edison home, we follow the Cedarwell C.A.R.E. values on every visit. Shoe covers go on before we step inside. Drop cloths go down on the floor before any work begins. We ask before we move or touch anything in your home. We explain the price before the first tool comes out. And before we leave, we take a photo of the cleanup so you know exactly what you’re getting. That is not an upsell. It’s the standard.
Our response time to Edison neighborhoods is reliable because our crews serve the town directly, with dispatch coordinated from our NYC metro office. We answer every call with a live person, 24 hours a day, seven days a week. No voicemail tree, no callback queue. If you need a gate installed and you have questions, a human picks up.
The 365-Day Done Right Promise covers every installation we do in Edison. If the gate isn’t right, we make it right. No argument, no fine print. That’s the whole promise.
Driveway Gate Installation in Edison
Driveway Gate Installation in Edison means more than hanging a panel on a post. Most of the homes here were built in the 1960s through 1980s, and the driveways weren’t poured with gate posts in mind. That means the post footing matters more than the gate itself. We set posts into proper frost-depth concrete piers below the frost line, which matters in Middlesex County because shallow footings heave every winter. A new driveway gate in Edison typically runs $3,200 to $9,800 depending on width, material, and whether you want automation.
You’ll know the exact number before we order anything, because the written price comes first. If the job involves a two-panel swing gate across a wide driveway, expect the higher end of that range. A simple single panel on a side driveway sits lower. We’ll tell you which one you’re in.
Posts Set Below Frost Line
Shallow posts are the single biggest reason Edison gates sag. A footing poured into an existing driveway slab doesn’t go deep enough, and after enough winters the post heaves and the gate twists. We dig below the frost line, set the pier properly, and plumb the post with a gauge before the concrete goes in.
Automation Ready On Day One
If you want your gate automated later, it’s far cheaper to plan for it now. We run the conduit, set the operator bracket, and leave the wiring path clean. That saves you a second concrete pour and a second crew visit down the road.
Sliding Gate Installation in Edison
Sliding Gate Installation in Edison is the right call for narrower lots and driveways that slope or have no room for a gate to swing inward. Sliding gates ride on a track and need level ground, and a lot of Edison’s older ranches and split-levels have exactly that. Expect to pay $4,800 to $14,500 for a sliding gate with automation, with the spread driven by gate weight, track length, and how much concrete work the site requires. The written price covers all of it.
Older commercial-grade slide operators along Route 1 and Amboy Avenue run daily and wear out their control boards and rack teeth long before the frame gives out. We see that pattern constantly. On residential drives, the job is usually simpler: a lighter gate, a quieter motor, and a track set dead level.
Track and Rack Set For Heavy Use
Rack and pinion teeth that don’t mesh square wear fast and make a racket every time the gate moves. We set the track with a string line, shim the rack to the gate’s exact weight, and torque everything before we call the job done.
When Your Driveway Has No Swing Room
Edison lots built in the 1970s often push the garage close to the street, and a swing gate would block the sidewalk or clip a car. A sliding gate hugs the fence line instead. That’s usually the deciding factor for parents with kids who walk to school and neighbors who share a driveway apron.
Trusted Brands We Service in Edison
We’re factory-trained on the gate equipment families actually own, and in Edison that means a lot of FAAC, BFT, and Linear operators, plus the Viking swing arms we see on older Oak Tree Road installations. When we install a new gate, we pair it with an operator we know inside out, not whatever the wholesaler had on the shelf that week. We keep common boards, arms, and safety edges in our local stock, so an Edison job doesn’t stall waiting on a box from across the country. The right fix happens on the first visit, because we know these systems well enough to identify the problem before we arrive.
Common Gate Installation Problems We See in Edison Homes
- Heaved posts and twisted frames. Shallow aftermarket post footings set into existing concrete driveways heave through Edison’s repeated freeze-thaw cycles. Swing gate panels go out of plumb and the latching edges stop meeting, which is the most common call we get off Woodbridge Avenue.
- Rusted ironwork that won’t hold paint. Many 1990s decorative iron gates in the Oak Tree Road corridor were never powder-coated. High summer humidity plus road-salt overspray from dense suburban traffic eats through weld joints and hinge barrels until a repaint is pointless.
- Obsolete control boards on commercial slide gates. Multi-family and mixed-use properties along Route 1 and Amboy Avenue run older slide gate operators on chain-link that cycle daily. The control board fails long before the gate frame, and replacement boards are often discontinued.
- Gates hung before modern safety requirements existed. If your gate was installed in the ’90s, it probably doesn’t meet current safety standards for photo-eyes, edge sensors, and entrapment protection. Retrofitting those is not optional and it changes the price math quickly.
Pricing for Gate Installation in Edison, NJ
Here’s the honest picture. A single swing gate in Edison starts around $3,200. A double swing gate across a wide driveway lands between $5,500 and $9,800. Sliding gates with automation run $4,800 to $14,500 depending on the track work. Steel runs less than wrought iron. Powder-coating runs more than paint, and it’s worth it here because of the humidity and road salt. What pushes price up: frost-depth pier work, a control box that needs replacing, safety edges that were never installed. We lay all of that out in writing before work starts. No invoice bigger than the quote, ever. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Edison
Our Gate Installation service covers Edison and the surrounding area, and our crews regularly work in Elizabeth, Newark, Bayonne, and Jersey City. If you’re near the Edison area but just over the line, call us anyway. We’ll tell you straight if we can reach your property and when.
Serving Edison, NJ - Our Local Coverage Area
We’re based in the Edison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Edison
If the post footing is shallow and has heaved, retrofitting usually means pulling the post, pouring a frost-depth pier, and re-plumbing the frame, which runs $900 to $2,200 depending on access and how far the frame has twisted. If the iron itself is rusted through at the hinge barrels or weld joints, replacing the gate is usually cheaper than trying to save it. Call (626) 649-4572 and we’ll look at it in person before you spend a dollar.
Yes, if you’re keeping a powered gate in operation, current safety standards require entrapment protection like photo-eyes and edge sensors, and a retrofitted 1990s gate usually has neither. Adding them to an older operator costs roughly $400 to $900, and in some cases the control board won’t support them, which means a new operator. We’ll tell you which situation you’re in before any work starts.
That depends on the control board. If the board is discontinued and the rack teeth are worn, a new operator usually runs $1,800 to $3,800 in Edison and ends up cheaper than chasing obsolete parts. If it’s a motor capacitor or a limit switch, the repair is often under $500. Call (626) 649-4572 and we’ll diagnose it on site.
It’s the combination of humid summers, road-salt overspray from dense suburban traffic, and the fact that many decorative iron gates installed along Oak Tree Road in the 1990s were never powder-coated. Paint alone can’t hold up to that. A proper powder-coat or a galvanized steel frame lasts decades in Edison’s climate, which is why we spec it on new installations.
Solar openers work on most Edison properties provided the panel gets enough direct sun, but they’re best for lighter swing gates; heavier sliding gates usually need hardwired power. On an existing driveway, we set posts into frost-depth piers even if that means cutting a section of concrete, because a gate hung on a shallow footing will fail within a few winters. We’ll show you the numbers for both options before you choose.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Edison since 2009.
Need a gate installed in Edison? Call (626) 649-4572 for a free estimate and a written price before any work begins. We answer live, day or night.