Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Corinth
Gate installation in Corinth, TX almost always starts the same way: with your HOA’s architectural review committee. Before we order a single panel or pour a footing, the style, height, and finish of your new gate have to match what your subdivision’s covenants require. That step alone can add a week or two to the timeline, and skipping it means an expensive gate that has to come down. We know the Corinth approval process well, and we plan for it from day one so you aren’t left with an open driveway and a crossed-out calendar. Call us at (626) 649-4572 and we’ll walk through what your HOA needs before any money changes hands.
Beyond the paperwork, most Corinth gate work traces back to one thing: the black clay under your posts. We’ll get into that below, because it’s the reason so many “new” gates end up sagging within a year. The short version is that we install gates engineered for Denton County soil, not gates that fight it.
Why Latch & Post Gate Repair Is Corinth’s Preferred Gate Installation Company
Corinth homeowners tend to find us after a gate has failed once already. Maybe the cedar rotted faster than it should have, or the iron gate pulls away from the hinge post every August, or the opener stopped talking to the community keypad. What they usually don’t know yet is that the first gate wasn’t installed for this soil or this HOA. That’s the difference. Led by Cody Beckman, our team looks at post footings, drainage, and the existing access system before we recommend anything.
We work inside Oakmont, Corinthian Bay Estates, and the subdivisions along Post Oak Drive and Swisher Road regularly, so we are not learning your HOA’s rules on the day we show up. We know which communities require cedar board-on-board, which approve ornamental iron on brick pilasters, and which have older DoorKing or Linear entry systems that a new operator has to speak to. That local knowledge keeps installations from getting rejected at the committee level and keeps your family’s entry working the day we finish.
The Cedarwell Care Promise applies to every Corinth job, whether it is a $400 pedestrian gate or a full driveway entrance with automation. Written price before we start. Shoe covers and drop cloths if we step inside the house to reach a control panel. A photo of the clean-up before we leave. You won’t sign anything you haven’t read, and you won’t find mud on the tile. Every call to (626) 649-4572 is answered by a live person, day or night.
Gate Opener Installation in Corinth
Gate opener installation in Corinth runs $850 to $1,900 for a typical single swing gate with a new operator, two remotes, and a hard-wired keypad. The spread depends on whether we’re replacing an existing opener on good posts or adding automation to a gate that was never powered, which means a new power run and possibly a concrete cut across the driveway. When a Corinth homeowner wants a gate opener, it’s usually one of two situations: the old operator died after ten or fifteen years of HOA service, or the gate was manual and the family is tired of getting out in the rain. Either way, we start by checking post alignment, because a gate that swings out of plane will destroy a new opener the same way it destroyed the old one.
Shared Entry System Integration
Many Corinth subdivisions run community access through a legacy system, often DoorKing or Linear. That’s the box at the call station that buzzing guests in from the front gate. A new operator has to integrate with that system, not replace it, or your neighbor’s keypad stops opening your gate and you’re back in front of the HOA board. We verify compatibility before we order the opener, and we handle the wiring and programming on install day so the community entry keeps working for everyone.
Power Runs and Safety Sensors
Automatic gates in Corinth need more than the motor. Code requires safety photocells so the gate won’t close on a child or a pet, plus a proper power supply that doesn’t overload a garage circuit. We run conduit at the correct depth, install the photo eyes at the required heights, and test the reverse function before we hand you the remotes. You’ll see the full scope in writing before work begins.
Gate Fabrication in Corinth
Gate fabrication in Corinth typically costs $1,200 to $3,400 for a custom cedar or welded steel driveway gate, depending on width, height, and finish. Corinth is not a city where you can hang whatever panel fits the opening. If your subdivision mandates cedar board-on-board, that’s what gets built. If it allows ornamental iron, you still need the style and height the committee approved for your elevation. We measure, build or order to spec, and coordinate fabrication timing with the HOA’s review calendar so the gate arrives when the approval is in hand.
Cedar Board-on-Board Gates
The cedar privacy gates in Corinth’s 1990s and 2000s subdivisions are now hitting the 20-to-30-year window where the lumber has done its time. We fabricate replacements using cedar selected for straight grain and minimal heartwood, then seal it for North Texas weather. The old gate had probably warped, split, or started pulling its hinge screws. The new one is built square and hung on a post that isn’t moving.
Ornamental Iron and Aluminum Gates
Near Lake Lewisville and in the brick-pilaster entry neighborhoods, gates lean more decorative: wrought-iron or aluminum with scrollwork or a powder-coated finish. We fabricate these to match the HOA’s approved design, then set them on hinges sized for the gate’s actual weight. Iron gates fail fast when the hinge is undersized or the post was never set deep enough. We fix both on the same trip.
Trusted Brands We Service in Corinth
Our Corinth installs run on equipment we trust and can get parts for locally. We factory-train on Viking, Ghost Controls, and DoorKing, among others, and we keep common boards, keypads, and photo eyes stocked so a failed part doesn’t mean a two-week wait. If your community is on a DoorKing entry system, we can typically source a replacement board the same week. If you’ve wanted a Ghost Controls opener for a lighter gate, we handle the full install and programming. The brand matters less than whether it’s the right fit for your gate’s weight and your HOA’s rules, and that’s the call we help you make.
Common Gate Installation Problems We See in Corinth Homes
- HOA rejection after the gate arrives. A homeowner orders an iron gate because it looks great, then the architectural committee denies it because the covenants call for cedar board-on-board. The gate can’t be returned. We pull the HOA requirements before ordering anything, so the gate that gets built is the gate that gets approved.
- Post heave in the black clay. Corinth’s expansive soil shrinks in summer and swells in winter, and a shallow footing rises and drops with it. The gate was hung square, but now it catches on the latch and pulls the hinges out of the post. We dig footings below the active clay line so the post stays put.
- New opener that won’t talk to the community keypad. The HOA’s shared entry runs on a legacy system, and the new operator doesn’t recognize the existing call signal. We check compatibility before the install and wire the new opener into the community system the day we mount it.
- Cedar gate that racks out of square in the first summer. The lumber wasn’t sealed for Corinth’s triple-digit July heat, or the gate was built without a cross brace. The hinge side stays put while the latch side sags an inch. We build with the brace and treat the wood before it goes up.
Pricing for Gate Installation in Corinth, TX
A single pedestrian gate in Corinth usually runs $500 to $1,100 installed, including hardware and the post. A double driveway gate runs $1,800 to $3,400 for cedar, or $2,400 to $4,800 for fabricated steel or aluminum, depending on width and finish. Automation adds $850 to $1,900. The two things that move a Corinth quote more than anything are HOA-mandated materials, which are the same for everyone in your subdivision, and the condition of the existing posts, which is why we check the footing before we price it. You’ll see the full number in writing for free, before any work is scheduled. Call (626) 649-4572 for a quote without obligation.
Every price we give includes the same things: the gate, the hardware, the post work, the cleanup, and the labor to hang it square. There is no surprise line item on the invoice, because the price was agreed before we started. And every installation is covered under our 365-Day Done Right Promise: if something isn’t right, we make it right.
We Also Serve Cities Near Corinth
If you’re not in Corinth proper, we also take gate installation work across the metro: Houston, San Antonio, Dallas, and Fort Worth. Our Gate Installation team coordinates scheduling from the Dallas-Fort Worth office and brings the same written pricing and Cedarwell Care Promise to every job. Wherever your gate needs rebuild or automation, the process starts with one call to (626) 649-4572.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Corinth
Yes. In nearly all Corinth subdivisions, the architectural review committee must approve the gate’s style, height, and finish before we can install it. Planning for that review is built into our process, so we won’t order fabrication until the committee has signed off. Call (626) 649-4572 and we’ll help you find the right forms and submit with the correct specs the first time.
In Corinth, a sagging gate almost always means the hinge post is moving in the black clay, not that the hinges themselves failed. The soil’s shrink-swell cycle heaves the post a fraction of an inch each season, and that’s enough to throw the gate out of plane. Replacing hinges on a moving post fixes nothing; we check the footing and re-set the post if needed.
Yes, we regularly wire new gate openers into Corinth community entry systems, including legacy DoorKing and Linear setups. We verify compatibility before ordering and handle the programming and safety sensor placement on install day. Bring us your HOA’s current access details and we’ll confirm the opener will work with it before any purchase is made.
An automatic gate in Corinth needs safety photocells that detect a person or pet and reverse the gate, plus a functioning manual release and proper egress in case of power failure. These are code requirements, not add-ons, and we install and test them on every automated gate job we do in the city.
A standard single gate with good posts takes one day to complete; a double gate or a job that needs a new post footing typically runs two days, with concrete cure time in between. HOA approval happens before we schedule, so the only wait is for committee sign-off and any custom fabrication. You’ll get a clear timeline in writing before we start.
If you have a gate that needs replacing, a driveway that needs automating, or an HOA approval you’d rather not navigate alone, call Latch & Post Gate Repair at (626) 649-4572. Cody Beckman and our Corinth team will measure, check the posts, and give you a written price. Free estimate, no pressure, and a gate that stays square through the next North Texas ice storm.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Corinth and the Denton County area.