Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Concord
Gate installation in Concord runs between $1,900 and $8,400 for most residential jobs, and the honest answer on pricing is that it comes down to the gate style, the length of the post run, and whether you’re automating it. We know Concord’s 1950s-through-1980s tract homes and the older wooden and wrought-iron gates that came with them, so we’re familiar with what fails here and what to do about it. Call (626) 649-4572 and we’ll get you a written price before any work begins.
Why Latch & Post Gate Repair Is Concord’s Preferred Gate Installation Company
Latch & Post focuses on gates and nothing else. We are not a general handyman service that does gates on the side, and we are not a big-box installer running crews through on volume. Our technicians are background-checked, uniformed, and factory-trained on the brands families in Concord actually own, including Viking, Ghost Controls, and DoorKing. Every visit includes shoe covers and drop cloths inside the home, and a photo of the cleanup before we leave. That matters when you have kids’ toys near the entry path and a dog curious about what’s happening in the yard.
We have been part of the Cedarwell family of independently owned and operated gate specialists since 2009, and every gate installation we do is covered by our 365-Day Done Right Promise. If the installation is not right, we make it right. No argument, no fine print. The written price we give you before we start is the price you see at the end.
Concord sits deep in the inland Diablo Valley where summer temperatures routinely exceed 100°F, 15 to 20 degrees hotter than coastal East Bay cities. Seasonal Diablo wind events funnel hard through valley gaps. That combination of extreme thermal cycling and sudden wind loads is a big part of why gates in Concord fail the way they do. A crew that only works the coast does not see the post heaving and hinge failure we see here.
Driveway Gate Installation in Concord
Driveway Gate Installation in Concord usually involves one of three situations: replacing a 40-to-60-year-old wooden gate that has warped past saving, converting a manual gate to an automated one, or building a new gate at a home that never had one. A single swing gate with a basic operator and keypad runs about $2,800 to $5,600 in Concord, depending on the post work and the operator brand. A double swing gate runs higher, usually $4,500 to $8,400, because both leaves need to be plumb and synchronized.
Many Concord driveway gates were set on concrete footings poured decades ago. The footing itself can crack from years of thermal cycling, and the post shifts. A gate that swings true in March can bind by August. We check the footing, not just the panel.
Retrofitting Your Existing Driveway Gate
Not every sagging gate needs to be replaced. If the posts are solid and the panel is only slightly racked, we can often re-hang the gate, replace the hinges, and add an operator with the safety photocells and edge sensors required by UL 325. That path usually costs less than full replacement, and we’ll tell you honestly when it’s the cheaper answer. If the panel has warped badly or the post footing is cracked, replacement is the better call.
New Driveway Gates for Concord Homes
For new gates, we build from steel frames with wood or wrought-iron infill, sized to the driveway opening and matched to the home’s age and style. The neighborhoods along Monument Boulevard and the north and east sides of Concord hold a lot of original ornamental iron driveway gates, and many homeowners want to keep that look while replacing the failing operator behind it. We can do that.
Sliding Gate Installation in Concord
Sliding Gate Installation in Concord is the right choice for driveways with a slope, a short setback, or a driveway that’s too wide for a practical swing gate. A single sliding gate with automation and safety sensors typically runs $3,800 to $7,200 in Concord, with the price depending on the track and cantilever hardware, the gate length, and the operator. Sliding gates carry all their weight on a track or a set of rollers, which means the footing and base preparation matter more than almost anything else.
Concord’s temperature swings are hard on sliding gate hardware. Steel expands in the summer heat and contracts overnight, which loosens track bolts and roller brackets. That’s a significant part of what we see here, along with track sections that have shifted on old concrete pads. We set slide gate track on level, reinforced pads and use roller systems that tolerate the valley heat without working themselves loose by October.
Track and Cantilever Systems
Track systems are less expensive and simpler to install, but the track needs to stay clear of debris. Cantilever systems ride above the ground with no track to clog, which is useful for driveways on the east side of Concord where wind-blown leaves and pavement cracks can foul a track. We’ll show you both options.
Operator and Safety Integration
Every new sliding gate we install in Concord includes a current UL 325 compliant operator, safety photocells, and an edge sensor. Older operators without photocells were common in the 1980s and 1990s, and code has changed. We won’t install a new gate without the safety equipment, and we’ll explain the entrapment protection requirements before we quote the work.
Trusted Brands We Service in Concord
We are factory-trained on the operators Concord homeowners actually have and the ones worth installing new: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing locally for Concord customers, which means we can often get a failing operator back online the same week instead of waiting on a parts order. When your gate is the only way into the driveway, that speed matters.
Common Gate Installation Problems We See in Concord Homes
- Post footings cracked from thermal cycling. Original 1960s-through-1980s concrete-set hinge posts have heaved and twisted through decades of 100°F-plus summers. A gate can sag or bind even when the panel itself looks fine because the post underneath has moved.
- Warped and racked wooden panels. Forty to sixty summers over 100°F desiccate wood gates, strip hinge fasteners, and leave panels permanently out of square. Any new operator installed on a warped panel works against a distorted frame from day one.
- Legacy operators with obsolete control boards. Older automatic gates often lack safety photocells and run on control boards no longer supported. When a Diablo wind event hits, these gates blow off their hinges or stall under load because the operator can’t hold the panel.
- Sudden post-wind-event failures. Repair calls in Concord spike the morning after a Diablo wind event. Gates already weakened by summer heat take a hard gust and let go at the hinge, sometimes blowing fully off the bottom hinge and leaning against the post anchor.
Pricing for Gate Installation in Concord, CA
A basic pedestrian gate install in Concord runs $900 to $2,200. A single swing driveway gate with operator runs $2,800 to $5,600. A double swing gate runs $4,500 to $8,400, and a sliding gate runs $3,800 to $7,200. What moves the price is the post condition, the gate size, the operator brand, and whether we need to pour new footings. We give you a written price before any work begins, always. No pressure, no surprise invoice at the end. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Concord
Latch & Post Gate Repair provides Gate Installation services to Concord and the surrounding communities, including Pleasant Hill, Walnut Creek, Lafayette, and Martinez. If you’re in one of those cities and need a gate looked at, call us and we’ll schedule a visit. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, and crews serve Concord locally.
Serving Concord, CA - Our Local Coverage Area
We’re based in the Concord area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Concord
In many cases, yes, and that’s the first thing we check before recommending a full replacement. If the post is solid and the panel is only slightly racked, new hinges and a re-hang can fix the sag for a few hundred dollars. But in Concord, where original post footings have often cracked from decades of thermal cycling, the sag may be coming from a moving post rather than a worn hinge. We’ll inspect the footing and give you a straight answer on whether hinge replacement is enough or the post needs to be reset. Call (626) 649-4572 and we’ll tell you what you’re looking at.
The wind event is the trigger, but the failure is set up months earlier by summer heat. Concord’s inland Diablo Valley location means gates here bake through months of 100°F-plus temperatures, which strips hinge fasteners, desiccates wood, and loosens operator mounts. When a Diablo wind event then delivers a sudden high-force gust, gates that were already compromised let go at the hinge. Coastal techs rarely see this because their climate never does the same preparatory damage. That’s why we check hinge mounts and post fasteners as part of every install here.
You can often retrofit a new operator onto an existing gate if the posts are solid, the panel is reasonably square, and the gate’s swing or slide action is smooth. A retrofit with operator, safety photocells, and keypad entry usually runs $1,800 to $3,400 in Concord. If the panel is warped or the post footing is cracked, retrofitting an operator means automating a gate that’s already fighting itself, and replacement becomes the cheaper answer. We’ll show you the gate’s actual condition and let you decide with real numbers in front of you.
Any new automatic gate in Concord should meet UL 325 entrapment protection requirements, which include safety photocells across the gate opening and an edge sensor that reverses the gate on contact. These features are not optional. Older gates from the 1980s and 1990s frequently lack them, and code has changed significantly. We will not install or automate a gate without current safety hardware, and we’ll explain what each sensor does before we start.
Concord’s inland Diablo Valley location means less marine moderation than Berkeley or Walnut Creek, so summer heat reaches higher and stays there longer. Wood dries, shrinks, and loses its protective coating in just a few seasons, which lets moisture in during winter rains and accelerates warp. Add in seasonal Diablo wind gusts and you get a gate that racks itself out of square within a decade. That’s why we recommend steel frame construction with wood infill for new Concord gates instead of all-wood panels.
If your old Concord gate is sagging, binding, or blowing open, call Latch & Post Gate Repair at (626) 649-4572. We’ll send a uniformed, background-checked technician to look at your gate, give you a written price, and answer your questions in plain English. Every installation we do is backed by the 365-Day Done Right Promise, and a live person answers around the clock.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Concord since 2009.