Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Camas
Camas sits at the western mouth of the Columbia River Gorge, and that changes how a gate should be built. We size posts and footings in Camas for wind load first, because a 45-mph east-wind night will find every weak hinge and shallow footing on a solid-infill driveway gate. If you’re planning a new gate or replacing one that’s racked and sagging, call (626) 649-4572 for a free measure and a written price before any work starts.
Our Gate Installation team works throughout Camas, from Lacamas Lake up to the Heights and out toward Camas Meadows. We know which neighborhoods catch the strongest wind and which lots hold water through the wet season. That local knowledge goes into every hinge, post, and operator we install.
Why Latch & Post Gate Repair Is Camas’s Preferred Gate Installation Company
Camas homeowners call us because we treat their house the way we’d treat our own. We lay drop cloths before we set a single tool on the floor, and we put on shoe covers before stepping inside. That’s part of the Cedarwell C.A.R.E. values our technicians work under: clean up like it’s our own home, ask before moving anything, respect quiet hours, and explain the price before the work. Families with kids and pets notice the difference.
We’re factory-trained on the brands Camas homes actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Viking operator on a Lacamas Lake driveway needs a new arm bracket, we’re not reading the manual for the first time. We’ve done it before.
Every Camas installation carries the 365-Day Done Right Promise. If something isn’t right, we make it right, no argument and no fine print. And a live person answers our phone around the clock, so when a Gorge wind event trips your operator at 9 p.m., you reach a human, not a voicemail.
Electric Gate Installation in Camas
Electric Gate Installation in Camas means building an automated gate that survives the Gorge east wind and the wet ground it blows over. We run the low-voltage power, set the operator and arm, configure travel limits and obstruction sensors, and test the manual release before we hand it back. The manual release matters here more than almost anywhere else: a windstorm that knocks out power shouldn’t lock you out of your own driveway. You pull the release key, disengage the operator, and swing the gate by hand until power returns. We walk every Camas customer through that exact procedure before we leave.
A typical electric gate installation in Camas runs roughly $5,200 to $11,500, depending on gate size, operator style, and how much trenching the power run requires. You’ll see the exact figure in writing before we start.
Operators sized for Gorge wind
A swing operator that works fine in Vancouver can trip its obstruction sensor every other night in Camas. We select operators with enough torque to move a wind-loaded gate and set travel limits with margin for flex. For heavy solid-infill gates, that means moving up a class in operator capacity rather than running a borderline unit at its limit.
Power runs and safety edges
We handle the full electrical scope: conduit, low-voltage cable, loop detectors, and the safety photocells and edges that UL 325 requires for entrapment protection. Every automatic gate in Camas gets a tested safety edge and photocell pair, not just the minimum the code asks for.
Driveway Gate Installation in Camas
Driveway Gate Installation in Camas starts with the post holes. Gorge wind means a solid-infill gate acts like a sail, and saturated Pacific Northwest ground lets shallow footings migrate. We dig deeper than standard, pour larger footings at the hinge post, and use heavier gauge steel posts for any gate with more than about 60% solid infill. That’s the difference between a gate that sags in three years and one that still swings true after a decade of east-wind winters.
A standard single driveway gate installation in Camas runs roughly $2,800 to $6,200 for a manual steel or ornamental iron gate, including posts, hinges, and hardware. An automated swing or sliding driveway gate typically lands between $5,800 and $12,500. The written price covers all of it before the first hole is dug.
Post and footing work for saturated ground
On Camas lots where the ground holds water through the wet season, we use deeper footings and, where needed, concrete collars wider than the frost line would demand elsewhere. A hinge post set in soft ground will lean under wind load, and a leaning hinge post is the first thing a homeowner notices when the gate starts dragging.
Swing versus slide for exposed lots
On lots that catch full Gorge wind, a sliding gate often outlasts a double swing gate because it doesn’t fight the wind the same way. We’ll tell you straight if a sliding gate is the better long-term call for your driveway, and we price both so you can decide with real numbers in hand.
Trusted Brands We Service in Camas
Most Camas driveways we visit have a LiftMaster, Viking, or Ghost Controls operator on the gate, with DoorKing and Elite showing up on larger sliding and commercial-style residential gates. We keep common parts for these brands on our trucks, which means a bent Viking arm bracket or a DoorKing limit switch doesn’t mean a two-week wait. We’re factory-trained on all of them, and we’d rather repair a good operator than sell you a new one you don’t need.
Common Gate Installation Problems We See in Camas Homes
- Wind-racked wooden frames on solid-infill gates. The Gorge east wind torques the gate leaf every time it gusts, and after a few wind seasons the frame is out of square. Hinges bind, the latch stops lining up, and the gate drags at the free end.
- Sagging hinge posts in saturated ground. Camas’s wet season keeps the soil soft for months, and a shallow post footing migrates under wind load. The gate sags at the hinge post long before it sags in the middle, which is the telltale sign of a footing problem, not a hinge problem.
- Tripped obstruction sensors after wind events. A 45-mph gust can push an automated swing gate off its travel limit, and the operator reads that as an obstruction. The gate stops dead, the alarm beeps, and the homeowner calls us thinking something broke. Often it just needs limits reset and the wind-load margin corrected.
- Corroded operator connections from moisture. Wind flex opens tiny gaps in electrical connections, then sustained moisture does the rest. We see corroded arm brackets, loop detector wiring, and operator terminals on Camas gates faster than on the same hardware in calmer, drier inland cities.
Pricing for Gate Installation in Camas, WA
Here’s what Camas homeowners can expect on a written quote. A manual single driveway gate runs $2,800 to $6,200 installed. An automated single swing or slide driveway gate runs $5,800 to $12,500. A double automated driveway gate runs $7,500 to $18,000 depending on width, infill weight, and operator capacity. Pedestrian gates run $900 to $2,800 depending on material. Every quote is itemized and agreed before any work begins, and the estimate is free.
What moves the price: gate width, solid infill versus open pickets, whether we need to trench for power, and whether the wind exposure on your lot calls for a heavier operator. The written quote tells you exactly which of those apply to your driveway.
We Also Serve Cities Near Camas
Our Camas crews also cover nearby Camas-area communities including Washougal, Vancouver, Battle Ground, and Ridgefield. If your gate is just over the Clark County line, call us and we’ll tell you straight whether we can get to it this week.
Serving Camas, WA - Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Camas
A strong Gorge east wind pushes your swing gate past its normal travel limit, and the operator reads that over-travel as an obstruction and stops the gate. We fix it by resetting the travel limits, checking the arm bracket for bending, and often stiffening or re-torquing the operator mount so the next wind event doesn’t push it past the limit again. If it’s a recurring problem, we’ll recommend a higher-capacity operator or a sliding gate configuration. Call (626) 649-4572 and we’ll diagnose it on site.
We size the hinge posts, footings, hinges, and operator for the wind load, not just the gate weight. That means deeper footings, heavier gauge posts, and an operator with enough torque margin to move a wind-loaded gate. On solid-infill gates we also check the frame for racking resistance and may add a mid-rail or corner gussets so the leaf doesn’t twist out of square over time.
Yes. Every automatic gate we install has a manual release that disengages the operator so you can swing or slide the gate by hand. We walk you through the release procedure on installation day, and we make sure the release is accessible from outside the gate, not hidden on the operator side. After a Gorge wind event knocks out power, this is often the first thing Camas homeowners need to know. Call us and we’ll talk you through it over the phone.
Yes, especially for solid-infill gates on exposed lots. Camas takes the Columbia Gorge east wind first, before Vancouver or Portland, and that wind loads the gate leaf, hinges, posts, and operator in a way that calmer cities a few miles west simply don’t experience. A gate that survives in Vancouver for ten years can rack and sag in Camas in three if it was built to Vancouver’s wind assumptions.
UL 325 requires any automatic gate to have at least two independent entrapment-protection devices, and we install safety photocells and a monitored safety edge on every automated Camas gate. We also set the operator’s reverse force low enough that a child or pet cannot be pinned. The wind in Camas makes entrapment protection more important, not less, because a gate that trips and stops is a gate doing its job.
Written by Cody Beckman, owner at Latch & Post Gate Repair - Camas, serving Camas and Clark County as part of the Cedarwell family.