Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alamo Heights
A new driveway gate in Alamo Heights, TX typically costs between $4,800 and $18,600 installed, including the gate, posts, opener, and permit coordination through Alamo Heights’s own building department. We plan every install around the live-oak limbs, the clay soil under the footings, and the storm winds that hit the Broadway corridor harder than the newer subdivisions to the north. That’s why we quote a written price before any work starts, lay drop cloths before we step inside, and back every installation with the 365-Day Done Right Promise. Call (626) 649-4572 to schedule a free estimate. We answer live, 24 hours a day.
Why Latch & Post Gate Repair Is Alamo Heights’s Preferred Gate Installation Company
We’ve worked driveways off Broadway, along Nacogdoches Road, and through the Highland Ridge streets where mid-century homes sit on big, shaded lots. Homeowners here ask different questions than folks in Elm Creek or Terrell Heights. They want to know whether the footing will survive the next hard freeze. Whether the opener will still work when a limb takes out power. Whether the crew will leave the front hall floor clean. We get those questions, because we hear them every week.
Cody Beckman leads our install team with one rule: explain the price before the work, and clean up like it’s our own home. That means shoe covers at the door, drop cloths under every tool, and a photo of the clean-up before the technician leaves. Our C.A.R.E. values aren’t a poster in the shop. They’re what the Alamo Heights streets have taught us a gate company has to be: Calm, Kind, and specific. We’re factory-trained on Linear, Ghost Controls, and DoorKing operators, and stock swing arms and hinges on the truck so a sagging gate doesn’t wait a week.
Automatic Gate Installation in Alamo Heights
Automatic gate installation in Alamo Heights turns a static driveway entrance into a powered, remote-controlled gate that opens without leaving the house – something that matters when the August heat is pushing 105°F and the dog still needs to come in. The job involves setting the post footings, hanging the gate leaf, mounting the operator (a swing arm, slide motor, or underground ram), running power to the opener, and wiring the safety photo eyes and edge sensors. On solid wrought-iron gates, wind load is the first thing we calcuate. A 12-foot solid panel catches a summer gust like a sail, and an undersized opener will fail within a season or two.
What you’ll pay depends on the gate type and drive length, but the work falls into a clear range. A single swing gate with a Linear or Ghost Controls opener in Alamo Heights runs $5,200 to $9,500. A double gate with a slower-start but heavier-duty arm typically lands between $8,500 and $14,800. Sliding gates spanning a wide driveway run $7,000 to $18,600. Every quote covers the gate, the operator, the post work, the power run, and the permit application through Alamo Heights city hall – the bill we quote is the bill you approve before the first hole gets dug.
Solar-Ready Operators for Storm Season
Power cuts happen here. A limb comes down on a line off Broadway, and suddenly the gate won’t move unless someone walks out and undoes the release. We install a solar backup on nearly every automatic gate we put in around Alamo Heights. The panel charges a battery that keeps the opener alive during an outage, and the opener itself stays factory-rated for the heat and UV this city throws at it.
Tubular-Steel and Wrought-Iron Swing Gates
The Alamo Heights streets are full of ornamental iron gates from the 1940s and 1950s, and a new one should match the house, not fight it. We order powder-coated frames cut to the existing post spacing, butt-weld the pickets, and match the hinge style to the home’s era. Every install includes a manual release installed at a height you can reach, clearly labeled, so a power cut never locks your own car out.
Gate Installation Services in Alamo Heights
Gate installation services in Alamo Heights cover everything from a single pedestrian gate on a side yard to a heavy double driveway gate with an operator, safety edges, and a keypad. Most homes here sit on lots that were cut before the city was built out, so every driveway has its own quirks – a 4-foot elevation change, a live-oak root two feet from the post, or a drainage swale that runs right through the gate line. We measure everything twice, then write the price.
For a pedestrian gate – the kind that leads from the garage around to the backyard – expect $1,200 to $3,800 installed, depending on width and whether you want a rim lock or a keypad release. A standard single driveway gate without automation runs $3,200 to $6,500. Adding a DoorKing or Ghost Controls opener to an existing gate frame runs $2,800 to $5,200. Wherever the job lands, the number you get on the written estimate is the number on the invoice. No surprise line items, no “we found something” after the concrete is open.
Dog-Run and Pool-Safety Gates
Pet containment is half of Alamo Heights pedestrian gate work. We set self-closing hinges and a latch a child can’t reach but an adult can, like the latch on a pool fence. Every hinge is welded to the post plate, not screwed, so a 60-pound dog leaning on the gate at full speed won’t work it loose. We use pet-safe finishes and no chemical smells when a gate sits near kennel space.
Driveway Gates with Intercom and Vehicle Detection
On longer driveways off Nacogdoches, a keypad alone doesn’t cut it. We install vehicle-detection loops under the first section of drive, so the gate opens as a car approaches and stays clear when a guest walks up to the pedestrian entry. Intercom models from DoorKing and Viking work on the same wiring, which keeps the trench count down and the yard looking clean.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alamo Heights
We’re factory-trained on the brands Alamo Heights homeowners actually have in their driveways. Linear and Ghost Controls make up the bulk of swing-gate openers in the 78209-area homes, and DoorKing dominates the older slide operators and apartment-style entries along Hildebrand Avenue. We stock replacement arms, circuit boards, remote transmitters, and safety-edge parts for all three on the truck. When your existing opener is one of those brands and the gate itself is still sound, we can often keep the opener and rebuild the gate around it – which saves real money compared to a full tear-out.
Common Gate Installation Problems We See in Alamo Heights Homes
- Wind-sheared operator arms. Solid wrought-iron gate panels act like sails during spring and summer thunderstorm gusts. A gate that closes fast during a microburst can snap the arm clean off the opener, leaving the gate stuck halfway and the motor stripped. We install wind-rated arms and slow-close settings on every solid-panel gate in Alamo Heights.
- Clay-heave post rotation. The expansive clay under Alamo Heights soaks up rain in wet months, then contracts in the heat. Mid-century post footings were rarely set deep enough for that movement, so gates slowly rotate out of plumb. When a gate binds at the latch, it’s usually the post that moved – not the hinge. We re-set the post on a deeper, wider footing with gravel drainage, not just a shim.
- Freeze-damaged hydraulic seals. February 2021 caught a lot of Alamo Heights gates by surprise. Hydraulic swing operators that were never rated for sustained cold held moisture in the seals, froze, and cracked when the gate tried to move. We now recommend cold-rated seals and gearbox lubricants on every install, and we check the rating on existing openers before summer.
- Live-oak limb damage to gate frames. The mature tree canopy over this city drops limbs that weigh more than some whole gates. A bending top rail or a half-inch sag on the hinge side tells us a limb hit the gate at speed. We straighten or rebuild the frame, then check the post pockets for cracks that would fail a year later.
Pricing for Gate Installation in Alamo Heights, TX
Here’s the straight set of numbers for Alamo Heights work. Pedestrian gate: $1,200 to $3,800. Single swing gate with opener: $5,200 to $9,500. Double swing gate with opener: $8,500 to $14,800. Sliding driveway gate: $7,000 to $18,600. Adding automation to an existing gate: $2,800 to $5,200. What moves the number: gate width, solid versus divided panels, paving or concrete under the gate line, power-run distance, and whether the old posts can carry a new gate or need full re-setting. Every estimate includes the gate, hardware, opener, power lead-in, safety eyes, permit coordination through Alamo Heights, and the 365-Day Done Right Promise. Call (626) 649-4572 and we’ll give you a written price before lunch.
We Also Serve Cities Near Alamo Heights
While this page focuses on Alamo Heights, our Gate Installation team handles installs in nearby communities where driveways and gates have their own demands. We run scheduled work into San Antonio, Houston, Dallas, and Fort Worth, with the same written-price rule and the same cleanup routine on every job. If you’re outside Alamo Heights proper, call (626) 649-4572 and we’ll tell you when we can be there.
Serving Alamo Heights, TX - Our Local Coverage Area
We’re based in the Alamo Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Alamo Heights
We pull them through Alamo Heights city hall and its building department, never San Antonio. Alamo Heights is its own municipality entirely surrounded by San Antonio, and its code-enforcement process is separate. A contractor who files through San Antonio gets rejected – and the homeowner waits. We handle the Alamo Heights permit application, inspection scheduling, and any code-mandated safety items like photo eyes and edge sensors, and the permit fee is in the written quote before work starts. Call (626) 649-4572 to have us check your gate location against the city’s own setback rules.
The post moved. In Alamo Heights the subsoil is expansive clay over limestone, and mid-century footings were often set just two feet down. Rain saturates the clay, the clay heaves, the post rotates – and the gate sags at the latch even with brand-new hinges. We don’t just adjust the hinges. We pull the gate, dig out the old footing, pour a wider and deeper base with a gravel drainage layer, and re-set the post plumb. Then we re-hang the gate, shim the hinges to match, and torque the opener arm to spec. The gate should close with one finger, like it did when it was new.
Yes. Alamo Heights enforces the same UL 325 safety standards as the rest of Texas, which means every automated gate needs a primary entrapment-prevention system – typically photo eyes across the gate path – and a secondary system like a safety edge or a pressure-sensing operator. Your permit won’t close without both working and documented. We wire the safety loop into the opener on every install and show you how to test the reverse function with a 2×4 block, because that’s the test the city inspector uses too.
Every gate we install gets a clearly labeled manual release within easy reach. On a swing opener, it’s a lever on the arm or a pull-chain near the motor that disengages the gate from the operator so you can push it open by hand. On a slide operator, there’s a keyed release on the side of the housing. We walk every Alamo Heights homeowner through the release during the final hand-off, and we mark the key and the release point with a weatherproof tag. If the power’s out and the gate won’t budge, call (626) 649-4572 and a live person will talk you through it over the phone, any hour.
Alamo Heights gate installation runs $1,200 to $18,600 depending on gate type and automation. A pedestrian gate is $1,200 to $3,800. A single driveway swing gate with opener is $5,200 to $9,500. A double swing gate is $8,500 to $14,800. A sliding gate is $7,000 to $18,600. Alamo Heights pricing runs slightly above the San Antonio metro average because most homes here have ornamental iron gates on custom post spacings rather than standard-width wood or chain-link panels, so the material and the setting work cost more. Call (626) 649-4572 for a written, line-itemed price. The estimate is free, and you’ll see the exact number before any work is approved.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Alamo Heights through the Cedarwell family of gate specialists.