Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Fremont, CA
Gate repair in Fremont comes down to two things: knowing the hardware and knowing the soil. Most gate problems here aren’t just a broken latch or a worn motor. They’re a post that has shifted because the clay beneath it expanded over a wet winter, or a frame that has started dragging because the ground on one side has moved a quarter inch. We work on Viking, Ghost Controls, DoorKing, and Elite systems across Fremont, and every estimate starts with a written price before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Why Fremont Homes Are Different
Fremont sits right along the Hayward Fault corridor, and the soil here behaves differently than in Newark or Union City. Across the Irvington, Centerville, and Mission San Jose flatland-to-foothill transition zones, expansive clay soils swell with winter rain and shrink through the dry summer. That cycle pushes gate posts out of alignment, cracks concrete collars, and tilts frames. A gate dragging on the ground after a wet winter almost never means the gate itself bent. It means the clay swelled and moved the post. Adjusting the hinges without fixing the foundation sets up a callback by the next rainy season. Any lasting repair in Fremont has to address what’s under the post, not just what’s bolted to it.
Fremont’s housing stock adds another layer. The 1960s through 1980s tract subdivisions in Irvington and Centerville are full of original ornamental iron and chain-link driveway gates that are now decades past their service life. In Mission San Jose, custom automated wrought-iron and steel sliding gates are standard on newer high-value homes. Around Warm Springs, HOA-managed communities added shared automated entry gates in the 2000s and 2010s, and that equipment is now entering its first major repair cycle. Each of these areas has different hardware, different HOA expectations, and different soil conditions.
The microclimate matters too. Warm Springs regularly runs 15 to 20 degrees hotter in summer than the Mission San Jose hills. That heat cycling stresses metal frames, rubber seals, and wiring insulation on automated openers in southern Fremont far more than in the northern and hills areas. When we quote a repair, we’re accounting for where in Fremont the gate actually lives.
Our Main Fremont Services
Most Fremont homeowners call us for one of two reasons: a gate that has stopped latching or swinging properly, or an automated gate that has stopped responding. Here’s how each works in Fremont.
Gate Repair in Fremont
Fremont gate repair usually starts with the post, not the hardware. We see sagging hinges, seized latches, and frames that have shifted out of square because the clay moved underneath them. Our techs check the post base before they adjust anything, and they’ll tell you honestly whether a hinge replacement will hold or whether the concrete collar needs rebuilding. We carry parts for Viking and Elite hardware locally, and we quote the full job in writing before work begins. Gate Repair in Fremont is the full breakdown of what we fix and what it costs.

Gate Installation in Fremont
A new gate in Fremont has to be built for the soil it’s standing in. That means setting posts in deep concrete collars that can handle clay expansion, and choosing hinges and frames sized for the gate’s actual weight and swing. We install ornamental iron, steel, and aluminum gates in Irvington, Centerville, Mission San Jose, and Warm Springs, and every installation includes a written price and a walkthrough of the plan before anything goes into the ground. Gate Installation in Fremont covers the process end to end.

Electric Gate Repair in Fremont
Electric gate repair in Fremont often means diagnosing why an opener that worked fine in September stopped in January. Wet clay shifts posts and misaligns the photo eyes and limit switches that automated gates depend on. We service Ghost Controls and DoorKing openers, check the wiring insulation for heat damage on Warm Springs units, and rebuild or replace the operator only after confirming the post and track are stable. Electric Gate Repair in Fremont explains what gets checked first and how quickly we can usually get a gate moving again.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fremont
We’re factory-trained on the brands Fremont homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite. We keep common hinges, latches, and opener parts stocked locally for these systems, which means many repairs don’t wait on a shipment. For less common parts, we’ll give you a straight answer on timing before you commit. See our brands for the full list.
Pricing for Gate Company in Fremont, CA
| Service | Typical range in Fremont |
|---|---|
| Gate latch replacement | $145-$240 |
| Hinge replacement (per pair) | $180-$320 |
| Gate post concrete collar repair | $350-$600 |
| Gate frame straightening (minor) | $200-$400 |
| Electric gate opener replacement | $850-$1,500 |
| Photo eye / safety sensor replacement | $160-$280 |
| Limit switch replacement | $120-$220 |
| Standard gate installation (single swing) | $1,200-$2,400 |
| Custom gate installation | $2,500-$6,000+ |
Two things push Fremont prices higher than some neighboring cities: the clay soil work we described above, and the number of older 1960s-1980s gates in Irvington and Centerville that need foundational correction, not just hardware swaps. Whatever the number ends up being, you’ll see it in writing before any work starts. No surprises, no pressure to accept.
Neighborhoods We Serve in Fremont
We work throughout Fremont, from the flatland tracts to the hills. Our dispatch is coordinated from the brand’s San Francisco Bay Area office, and crews serve Fremont locally every week.
- Irvington
- Centerville
- Mission San Jose
- Warm Springs
- Niles
Most Fremont calls get same-day or next-day scheduling, depending on when you call and what the gate needs.
Service Area – Cities Near Fremont
We serve Fremont and the surrounding East Bay communities. If your home is in Union City, CA, Hayward, CA, Pleasanton, CA, or further out near Newark, TX, the same written-price promise and cleanup routine applies.
Serving Fremont, CA - Our Local Coverage Area
We’re based in the Fremont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fremont
Most Fremont calls are scheduled same-day or next-day. Call (626) 649-4572 and a live person answers 24/7. We’ll give you a specific window based on your neighborhood and the job, not a four-hour shrug.
Many Warm Springs and Mission San Jose communities have HOA rules about gate style, height, and finish. We’ll tell you what typically needs approval, but the homeowner is responsible for securing it. We can provide the specs your HOA will ask for.
Most standard driveway gate replacements don’t require a Fremont permit. If your project does, we’ll flag it during the estimate and walk you through what’s needed. You’ll know before any work starts, in writing.
If your gate is dragging, stuck, or simply not working the way it should, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. Cody Beckman and the team answer around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fremont Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs





Before
After
Before
After
Before
After