Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Pomona
When an electric gate stops opening in Pomona, the fix usually comes down to one of a few things: a stripped worm gear from wind stress, an obsolete control board, or a hinge post that has given up after twenty years in the inland heat. We are Electric Gate Repair specialists at Latch & Post, part of the Cedarwell family, and we work on Pomona gates every week. Most opener and actuator repairs in Pomona run between $180 and $620, and you will see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Key Takeaways
- Pomona’s Santa Ana wind events, funneled through the Brea and Tonner Canyon passes, are a leading cause of stripped slide-gate worm gears and bent swing-gate frames.
- Most electric gate opener repairs in Pomona run $180-$620; full operator replacements with new arms typically run $650-$1,400.
- Wrought iron driveway gates installed across Pomona in the 1990s and early 2000s are now failing in clusters, block by block.
- We stock rebuilt actuator kits for mid-2000s LiftMaster and Mighty Mule swing-gate operators, the exact units we see failing all over South Pomona.
- Every visit includes a written price before work starts, shoe covers and drop cloths, and a photo of the clean-up before we leave.
Why Latch & Post Gate Repair Is Pomona’s Preferred Electric Gate Repair Company
Our technicians know Pomona’s gates the way a mechanic knows a specific model year. We see the same vintage of hardware again and again on the same blocks, and that repetition means we carry the right parts on the truck instead of ordering them after the first visit. When a homeowner near Ganesha Park calls about a dead opener, we already know to check whether it is a mid-2000s LiftMaster swing actuator, because that is what most of those streets were gated with.
Every Latch & Post technician is background-checked, uniformed, and factory-trained on the brands Pomona families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work to the Cedarwell C.A.R.E. values on every job: we Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. Shoe covers go on before we step inside. Drop cloths go down on any floor we cross. And before we leave, you get a photo of the clean-up. The 365-Day Done Right Promise backs every repair and installation. If it is not right, we make it right, no argument.
Dispatch and scheduling for Pomona jobs are coordinated from the brand’s Los Angeles office, and our crews serve Pomona locally throughout the week. A live person answers the phone 24/7, weekends and holidays included.
Gate Opener Repair in Pomona
Gate Opener Repair in Pomona is the call we make most often to homes with automatic driveway gates, and in this city the failure pattern is unusually predictable. The inland heat shortens motor life, and Santa Ana winds that accelerate through the Brea Canyon and Tonner Canyon passes slam worn-latch gates against their stops with enough force to strip worm gears in a single night. Repairing an opener here means diagnosing whether the motor, the gear assembly, the control board, or a combination of all three has failed, and we explain that diagnosis in plain language before we ask you to spend a dollar.
Worm Gear and Motor Work
A stripped worm gear will not hold the gate closed, and running the opener once the gear has failed can damage the motor behind it. In Pomona, we replace the gear and inspect the motor’s start capacitor at the same time, because the hot summers push both parts hard. Most gear replacements run $220-$440 including the part and labor.
Control Board Diagnosis
When an opener has power but will not respond, the control board is often at fault, and on Pomona’s older gates that board is frequently obsolete. We test the board in place before recommending anything. Where the board is still available, replacement runs $180-$380. Where it is not, we can usually retrofit a current-model control board onto the existing operator, which runs $350-$620.
Automatic Gate Repair in Pomona
Automatic Gate Repair in Pomona covers the whole system, not just the motor: the gate itself, the hinges, the post it hangs from, the operator arm, the safety sensors, and the controls. On Pomona’s post-WWII tract homes, most driveway gates were added decades after the house was built, often hung on posts that were never designed to carry a heavy wrought iron panel. When we repair an automatic gate here, we check whether the system has actually failed or whether the post is sagging and dragging the rest of the hardware down with it. That distinction changes the whole price, and we tell you which one you have before we quote anything.
Safety Sensor and Photo-Eye Repair
Automatic gates in Pomona must reverse when a person, pet, or car is in the path, and that protection depends on working photo-eyes and edge sensors. When sensors fail, the gate usually refuses to close, or refuses to move at all. We align, clean, rewire, or replace them, and most sensor work runs $140-$260.
Hinge and Post Correction
A sagging gate is not a sensor problem, but it mimics one: the gate drags, the opener strains, and eventually the motor burns out. In Pomona we see this constantly on older wrought iron panels. We weld cracked hinges, shim or replace worn post brackets, and correct the sag so the operator is not fighting the gate’s weight on every cycle. Hinge repair runs $180-$400 depending on the gate’s size and how many hinges have failed.
Trusted Brands We Service in Pomona
We are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Pomona, the brands we service most often on older gates are LiftMaster and Mighty Mule, simply because thousands of those openers went in during the 1990s and 2000s retrofitting wave. Our technicians stock rebuilt actuator kits and common control boards for those specific mid-2000s units, which means a same-day fix for many Pomona homes instead of a parts order that takes a week.
Common Electric Gate Repair Problems We See in Pomona Homes
- Wind-stripped worm gears and bent frames. Santa Ana events funnel through the Brea Canyon and Tonner Canyon passes with unusual force. A worn latch lets the wind throw the gate hard against its stops, stripping gears and bending the panel overnight.
- Obsolete control boards on cluster-failed streets. When entire Pomona blocks were gated around the same time in the early 2000s, the openers aged together. We now see whole streets where the same LiftMaster and Mighty Mule boards fail within a year or two of each other.
- Sun-baked motors and cracked seals. Pomona summers regularly pass 100°F with heavy UV. That heat burns out opener motors faster than in coastal cities and cracks the rubber seals on actuator arms, letting dust and moisture into the gear housing.
- Aging posts on 1950s-1970s tract homes. Most Pomona gates were retrofitted onto posts never built for that load. Decades of heat and wind stress leave posts dry-rotted or leaning, and the gate sags until the opener finally cannot move it.
Pricing for Electric Gate Repair in Pomona, CA
Electric gate repair in Pomona typically runs between $180 and $620 for component-level repairs. A control board replacement runs $180-$380. A worm gear replacement in a swing or slide operator runs $220-$440. A rebuilt actuator install for a mid-2000s LiftMaster or Mighty Mule swing unit runs $350-$620. Full operator replacements with new arms run $650-$1,400, and that includes the written price before work begins, shoe covers and drop cloths, and a photo of the clean-up before we leave. If a gate is sagging badly on a failed post, we will quote the post repair separately and explain why it matters before we do anything else. Estimates are free. Call (626) 649-4572 for an exact number on your gate.
We Also Serve Cities Near Pomona
Latch & Post Gate Repair serves Pomona and the surrounding communities, including Diamond Bar, Montclair, Chino Hills, and Claremont. If you are near the Pomona border, call us and we will confirm coverage. You can also read more about our work across the region on our Electric Gate Repair in Pomona page.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pomona
Your block was most likely gated around the same time during Pomona’s 1990s-2000s wrought iron retrofitting wave, so every opener on the street is the same age and the same model family. When one fails, the others are usually close behind. The mid-2000s LiftMaster swing actuators we see all over South Pomona fail in clusters for exactly this reason, and we stock rebuilt actuator kits for those units so we can usually fix several homes on the same block within the same week. Call (626) 649-4572 and we will tell you whether your unit is one we can repair same-day.
Yes. Current safety standards require that any automatic gate in Pomona reverse when a person, pet, or vehicle is in its path, regardless of when the gate was installed. Many 1990s and early 2000s gates went in before photo-eyes and contact edges were standard, and we retrofit modern sensor systems onto older gates every week. Most sensor retrofits run $300-$600 including parts and labor, and we will give you the written price before we start.
Most wind-bent Pomona gates can be repaired rather than replaced, depending on how much the frame has twisted and whether the hinge post is still sound. We straighten or reinforce bent frames, replace the latch with a model that actually holds under wind load, and correct any sag. If the post itself is dry-rotted we pour a new footing and reset it. Replacement is only the answer when the frame is cracked through or the gate has pulled itself off its hinges entirely, and we will tell you honestly which one you have before quoting either option.
Yes, in nearly every case. Obsolete control boards are the single most common electrical failure we fix on Pomona’s older gates, and we routinely install current-model boards onto existing LiftMaster, Mighty Mule, and Linear operators without replacing the whole motor. The retrofit runs $350-$620, and it gives your old gate modern safety logic, better surge protection, and parts that are still manufactured. If the motor itself is also at the end of its life, we will tell you that a full operator replacement is the cheaper long-term answer, but we will show you both numbers first.
Two reasons. First, Pomona’s inland summers routinely exceed 100°F with heavy UV radiation, which cooks opener motors, cracks actuator seals, and degrades powder-coat finishes faster than the mild coastal climate. Second, this city sits directly in the path of Santa Ana wind events that accelerate through the Brea Canyon and Tonner Canyon passes, and those winds physically stress gates in ways coastal neighborhoods never experience. A gate in Pomona works harder every year than the same gate in Santa Monica. That is not marketing, it is just the local weather.
If your electric gate is giving you trouble in Pomona, call (626) 649-4572 for a free estimate. A live person answers around the clock, and we will give you a written price before any work begins.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pomona since 2009.