Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Plant City
Electric gate repair in Plant City most often comes down to two things: a power or control-board failure from Florida’s near-daily summer lightning, and mechanical damage from the strawberry-harvest traffic cycle that pounds farm-entrance gates from November through March. We handle both, and we handle them on the same schedule the rest of Plant City runs on. If your gate is dragging, buzzing, stuck open, or refusing to respond to the remote, call us at (626) 649-4572. We’ll give you a written price before any work starts.
We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve been exclusively a gate company since 2009. We don’t do plumbing or roofing on the side. The name tells you what we focus on: the latch that holds the gate and the post that carries it. In Plant City, that focus matters more than in most places because your gate isn’t decorative. It’s holding back a working property.
Why Latch & Post Gate Repair Is Plant City’s Preferred Electric Gate Repair Company
Plant City customers call us because we’ve seen what the summer storm season does to a LiftMaster control board, and because we know that a gate off Cork Road takes a different beating than one in a Valrico subdivision. Our technicians are factory-trained on FAAC, BFT, Linear, and Viking operators, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. That training means the right part goes in on the first visit, not the third.
Every call to us is answered by a live person. Day, night, weekend, holiday. No voicemail tree, no “we’ll call you back in 24 to 48 hours.” When your farm gate won’t close and you’ve got livestock or equipment to protect, that matters. We coordinate dispatch from our South Florida metro office, and our crews travel to Plant City daily. The technician who shows up is background-checked, uniformed, and will knock before touching anything.
We work to the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work. Shoe covers and drop cloths go down before we step inside. We take a photo of the cleanup before we leave. And every repair carries the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print.
Commercial Gate Operator in Plant City
Commercial gate operators in Plant City live a harder life than almost anywhere in Hillsborough County. Between November and March, refrigerated semis and flatbed harvest equipment roll through farm entrances off Cork Road and the surrounding agricultural corridors, sometimes thirty or forty times a day. The operator arm gets compressed past its limit. The hinge posts take side loads they were never rated for. A typical commercial gate operator replacement or rebuild in Plant City runs $850-$1,800 depending on the gate width, weight, and whether the post footings need resetting.
Operators Built for Wide Rural Gates
Wide pipe swing gates on farmsteads need operators with real torque, not the light-duty swing arms sold for suburban driveway gates. We size the operator to the gate’s actual weight and cycle count. A gate that opens forty times a day for truck traffic needs a different gearbox than one that opens twice for a car.
Surge Protection as Standard
Plant City sits inside Lightning Alley. A nearby strike doesn’t need to hit the gate directly. It just needs to induce voltage on the power line or the keypad wiring, and a control board is dead. We recommend and often install surge protectors on every commercial operator we touch out here. It’s a $150-$250 addition that beats a $600 board replacement.
Gate Opener Repair in Plant City
Gate opener repair in Plant City usually lands in our queue in one of two seasons: mid-summer, when thunderstorm voltage has cooked a board or keypad, and late March through April, when strawberry harvest wraps up and farm owners finally have a window to call about the gate that’s been limping since January. Most residential opener repairs here run $180-$450 for common fixes like capacitor replacement, limit-switch adjustment, or receiver board work. If the opener’s gearbox has sheared from a gate that was dragging for months, the repair typically lands in the $400-$750 range.
Control Board and Keypad Failure
This is the most common call we get after any afternoon thunderstorm. The board inside the opener reads the keypad signal, triggers the motor, and manages the safety sensor logic. One surge kills it. We diagnose whether it’s the board, the transformer, or the wiring, and we keep common FAAC, BFT, and Linear boards stocked so the fix happens the same visit.
Mechanical Wear From Out-of-Plumb Gates
When a gate post settles in sandy soil or gets knocked by a truck mirror, the gate leaf tilts. The opener then has to lift the weight instead of just swinging it. That burns out motors and strips gears. Repairing the opener without fixing the post means you’ll be calling again in six months. We address both.
Trusted Brands We Service in Plant City
We’re factory-trained on the operators Plant City actually runs: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common FAAC and BFT boards, Linear remote receivers, and LiftMaster gear kits stocked specifically because they’re the most common units across Plant City’s farms and newer subdivisions along SR-39 and Thonotosassa Road. That means shorter wait times for you, because we’re not ordering a board from a distributor and hoping it arrives before Friday.
Common Electric Gate Repair Problems We See in Plant City Homes
- Lightning-fried control boards: A summer storm rolls through at 4 p.m., and by evening the gate won’t respond to the remote or the keypad. The board absorbed a surge on the power or signal line. It’s the single most common electric gate failure in Plant City.
- Post heave from sandy, saturated soil: Wet season rains saturate the ground around gate posts, and sandy soil shifts. The post moves a few inches, the gate sags, and the opener strains until something gives. We reset and re-anchor post footings before adjusting the operator.
- Bent frames and sheared hinges from harvest traffic: Farm-entrance gates take hits from semi trailers and harvest equipment all winter. The frame bends, the hinge pins shear, and the gate drags across the drive. The opener can’t compensate, and it fails shortly after.
- Remote and keypad pairing issues: After a surge or a board swap, the old remotes and keypad codes often stop talking to the new board. We reprogram everything, test it from inside and outside the property, and show you how to add a new remote yourself.
Pricing for Electric Gate Repair in Plant City, FL
Here are the ranges our Plant City customers actually pay, in writing, before we start:
- Gate opener control board replacement: $350-$700 (parts and labor, brand-dependent)
- Safety sensor replacement or realignment: $120-$260
- Gate opener motor or gearbox rebuild: $500-$900
- Post reset and re-anchor (single post): $200-$450, more if concrete work is required
- Surge protector installation for gate operator: $150-$250
These are honest Plant City market numbers. The exact price depends on your gate’s size, the operator brand, and whether the post footing needs work. You’ll get the exact number in writing at the start of the visit, before any work begins. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Plant City
We work throughout northeast Hillsborough County. If you’re in Valrico, Mango, Thonotosassa, or Brandon, our Electric Gate Repair crews make the trip the same way we do for Plant City customers. The same written-price policy and 365-Day Done Right Promise apply everywhere we work.
Serving Plant City, FL - Our Local Coverage Area
We’re based in the Plant City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plant City
Plant City sits squarely inside Florida’s Lightning Alley, so near-daily summer thunderstorms induce power surges into gate operator boards and keypad lines far more often than in Tampa or Brandon, which see less frequent and less direct strike activity. Add to that the November-to-March strawberry harvest, when refrigerated semis and flatbed harvest equipment repeatedly stress farm-entrance gates, and operators out here simply accumulate damage faster. A surge protector is a sensible add-on for any Plant City gate. Call (626) 649-4572 and we’ll quote one for your setup.
Late March through April, right after strawberry harvest ends. Farm-entrance gates along the Cork Road agricultural corridor have absorbed months of overloaded truck traffic and storm surge, and owners finally have a window to call. We staff up for that window every year. If you call us during harvest, we’ll still get out, but late spring is when we see the backlog.
Yes, solar gate openers are a practical solution for rural Plant City driveways where running 120V power to the gate would cost thousands. A properly sized solar panel and battery setup can run a FAAC or Linear swing operator on a standard farm gate reliably in Florida sun. Panel sizing matters because our operators run more cycles during harvest, and the battery bank needs to cover early-morning openings before full sun. Call (626) 649-4572 for a free on-site assessment.
Usually both. The sag is what you see, but the cause is usually a post that has settled or been knocked off plumb, combined with a hinge or frame that took the side load. The opener then has to lift the gate instead of just swinging it, which burns out the motor. We diagnose both before recommending work. Fixing only the opener guarantees a repeat visit.
Yes. Every automatic gate operator in Plant City needs working safety sensors, including photo eyes and, for larger or commercial gates, reversing edges that detect a person, pet, or vehicle in the gate’s path. Florida building codes require them, and a gate without functioning sensors is a serious injury risk to kids and pets. If your sensors are misaligned or bypassed, call us and we’ll correct them. They’re not optional.
If your gate is down and you need a real person on the phone, call (626) 649-4572 now. We answer with a live voice, we give you a written price before any work starts, and we leave your property cleaner than we found it. That’s the whole deal.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, coordinating electric gate repair for Plant City, FL through the Cedarwell family of independent gate specialists.