Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Corte Madera, CA
Gate work in Corte Madera comes down to one thing most Bay Area towns don’t deal with: salt air off the tidal marshes eating through standard hardware in two to three years while the gate still looks fine from the street. The houses on the flatland east of Highway 101 sit close enough to the bay that overnight humidity and salt-mist settle into hinges, springs, and motor housings, so material choice matters as much as the mechanical fix itself. Up in the hills, older custom homes on steep driveways put a different kind of stress on gate hardware, with pivot points wearing unevenly on grades. We work both sides of 101, and we quote every job in writing before anything gets touched. Call (626) 649-4572 and you’ll reach a live person, any hour.
Why Corte Madera Homes Are Different
Corte Madera splits along Highway 101, and the split matters for gates. The bayfront flatland is mostly mid-century ranch homes from the 1950s through the 1970s, many still running original or early-replacement redwood fence-and-gate systems. Those older gates were built with standard galvanized hinges and latches, which is exactly the hardware that salt-laden air degrades fastest here. Near Corte Madera Creek and the shoreline, we regularly see hinges and operators showing visible oxidation and binding within two or three years, because the overnight marine layer settles into every metal surface even during dry summer months. East of 101, stainless hinges and NEMA-4-rated operators are the baseline we spec, not an upgrade.
The hillside neighborhoods above the freeway tell a different story. Custom homes from the 1960s through the 1980s sit on steep, winding driveways where automated swing and slide gates were added decades ago, often with operators that were undersized for the grade. Uneven grade loads stress pivot hardware over time, and a gate that drifts or binds on a slope is usually a sign of that accumulated wear rather than a single part failure. We approach every Corte Madera job by looking at where the house sits relative to the bay first, because that answer changes which parts we recommend.
Our Main Corte Madera Services
Most Corte Madera homeowners call us for one of two reasons: a gate that won’t latch or swing properly, or an electric operator that stopped responding. All three core services have their own dedicated Corte Madera pages with full details and local pricing.
Gate Repair in Corte Madera
A sagging redwood gate in a 1960s ranch home near the creek is rarely one problem. The post has usually shifted in the clay soil, the hinges have worn oblong from rust, and the latch no longer lines up. We disassemble what’s failed, replace what can’t be saved, and choose stainless or powder-coated hardware where the next owner won’t have to think about salt air for a long time. Full details on what we fix and what it costs in Gate Repair in Corte Madera.
Gate Installation in Corte Madera
New gates in Corte Madera need to be built for where they’ll live. On the flatland, that means marine-grade powder coat and stainless fasteners from day one. In the hills, it means matching the operator to the driveway grade so the gate doesn’t fight the slope. We measure, build, and install with the same care routine on every job: shoe covers and drop cloths, a written price before work starts, and a cleanup photo before we leave. See Gate Installation in Corte Madera for the full breakdown.
Electric Gate Repair in Corte Madera
Salt air is hardest on electric gate components. Motor housings, control boards, and limit switches near the bay take constant exposure, and a NEMA-4-rated enclosure is often the difference between a repair that lasts and one that fails again in two years. We diagnose the operator, the power feed, and the safety edges, then quote the fix in writing before ordering anything. The specifics, including brands and response times, are on Electric Gate Repair in Corte Madera.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Corte Madera
We’re factory-trained on the operators Corte Madera homeowners actually have: Viking, Ghost Controls, DoorKing, and Elite among them. Common boards, remotes, and safety-edge parts ship quickly, and many repairs finish on the first visit. See our brands for the full list we service.
Pricing for Gate Company in Corte Madera, CA
| Service | Typical range in Corte Madera |
|---|---|
| Gate latch replacement | $125 - $250 |
| Hinge replacement (pair) | $150 - $400 |
| Gate alignment and sag correction | $200 - $450 |
| Post reset or replacement | $300 - $800 |
| Full wood gate repair (redwood, typical 4-6 ft) | $350 - $900 |
| Electric operator diagnosis | $120 - $220 |
| Control board replacement | $300 - $700 |
| Safety sensor or edge replacement | $200 - $500 |
| Full gate installation (excludes operator) | $900 - $3,500 |
| Electric gate installation (operator included) | $2,000 - $6,500 |
Bayfront properties east of 101 tend to land on the higher end when corrosion has spread from one component to several, because salt-damaged hinges usually mean the post and latch need attention too. Whatever the number, you’ll see it in writing before any work starts, and it doesn’t change unless you approve a change first.
Neighborhoods We Serve in Corte Madera
We work across all of Corte Madera, from the bayfront flats near the creek to the hillside drives above 101. The same crews and care routine cover every neighborhood.
- Marina Village
- Christmas Tree Hill
- Madera Gardens
- Chapman Park
- Mariner Cove
Most Corte Madera jobs are scheduled within a few days of the call, and urgent repairs can often be seen the same day when a gate won’t secure or an operator is stuck open.
Service Area – Cities Near Corte Madera
Our Corte Madera crews also cover the surrounding Marin communities: Larkspur, CA, Mill Valley, CA, Kentfield, CA, and San Rafael, CA. Each is served by the same background-checked technicians and the same written-price promise.
Serving Corte Madera, CA - Our Local Coverage Area
We’re based in the Corte Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corte Madera
Urgent repairs where a gate won’t secure or an operator is stuck can often be seen the same day. Standard work is typically scheduled within a few days of your call. Every call is answered by a live person 24/7, so you’ll know your timing before you hang up.
Many Corte Madera neighborhoods, especially the hillside and creek-adjacent areas, have HOAs with design guidelines for gates facing the street. We can match your existing gate style or the HOA’s spec sheet, and we’ll note any visible restriction before the quote lands. Call (626) 649-4572 and we’ll talk it through.
Yes, and those are the jobs where material selection matters most, because salt-mist corrosion is the main reason gate hardware fails early east of 101. We spec stainless hinges and sealed operators as a baseline for bayfront properties, not an upgrade. Estimates for any Corte Madera property are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corte Madera Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco