Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Union Park, FL
Latch & Post Gate Repair is the gate company Union Park homeowners call when a swing-arm operator at a manufactured-home community stops responding, or a 1980s-era slide gate finally gives out after one too many summer lightning storms. We work exclusively on gates: repair, installation, and electric gate repair. Most of the work we see here involves aging communal entry systems, rust-weakened steel posts, and control boards that took a surge hit during one of Union Park’s near-daily June-through-September thunderstorms. Call (626) 649-4572 and a live person answers, any hour.
Why Union Park Homes Are Different
Union Park is unincorporated Orange County, and its gate stock reflects when and how this area grew. The community has an unusually dense concentration of manufactured-home parks and 1980s-to-early-1990s apartment complexes. Many of those communities installed motorized entry gates during the suburban build-out east of Orlando, and a lot of those gates are still running on the original operators. That means a disproportionate share of local calls involve aging swing-arm or slide-gate operators on communal driveways with obsolete magnetic-card or keypad access systems, not the ornamental-iron driveway gates common in newer Orange County suburbs. The traffic volume is high: dozens of households cycling one gate daily, year after year.
The climate compounds it. Union Park sits in Central Florida’s zone of near-daily summer thunderstorms, and the resulting lightning and power-surge events are the leading cause of fried gate-operator control boards in the area. Add persistent humidity that routinely runs above 80 percent, and you get accelerated rust on steel hinges, tracks, and posts, especially on east-facing gates that hold morning dew the longest. What we typically find is a gate showing electrical and mechanical failure on the same call: a surge-damaged board plus a hinge so corroded the operator is fighting itself.
There’s one Union Park-specific failure we see often enough to test for first. In manufactured-home communities, the original 1980s-to-90s loop-detector wiring is often buried under the asphalt apron at the entry. Years of re-paving and heavy vehicle traffic have damaged those loops. The gate presents as a dead operator when the real failure is a broken vehicle-detection loop. Testing the loop before replacing the board saves parts and time.
Our Main Union Park Services
Union Park homeowners most often call us for two things: restoring a gate that has stopped working altogether, and bringing a manual gate into an era where nobody has to get out of the car in the rain. Each service has its own Union Park page with deeper detail.
Gate Repair in Union Park
Repair work in Union Park runs the range from replacing a rusted hinge on a chain-link perimeter gate to rebuilding the track on a slide gate that has been scraping for a year. We work on wrought-iron and chain-link, the two most common materials here, and much of what we service is original to the community’s construction. We test before we replace; in Union Park that loop-detector check has saved more than one homeowner from paying for a board they did not need. Gate Repair in Union Park
Gate Installation in Union Park
New installation here is often a replacement of a communal entry gate that has reached the end of its useful life, or a first-time driveway gate for a single-family tract home. We measure, order, and schedule, and the written price covers the full scope before any work begins. Union Park’s climate argues for powder-coated steel over raw metal, and we spec components accordingly. Gate Installation in Union Park
Electric Gate Repair in Union Park
Electric gate work in Union Park is dominated by operator diagnostics. Lightning-damaged control boards, failed loop detectors, keypads with worn-out key contacts, and remotes that stopped pairing after a power blip. We carry boards and parts for the brands families actually have here, and the technician will check the loop wiring before condemning anything. Electric Gate Repair in Union Park
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Union Park
We are factory-trained on the brands Union Park communities run most: Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Common boards and remotes are stocked for quick turnaround. See our brands for the full list.
Pricing for Gate Company in Union Park, FL
| Service | Typical range in Union Park |
|---|---|
| Gate operator diagnostic | $75 - $150 |
| Control board replacement | $240 - $450 |
| Gate hinge replacement (1-2 hinges) | $120 - $260 |
| Slide gate track repair | $200 - $400 |
| Loop detector replacement | $300 - $600 |
| Keypad replacement | $180 - $320 |
| Remote programming | $40 - $90 |
| Gate latch replacement | $110 - $230 |
| Service call fee (applied to repair) | $60 - $90 |
What pushes a Union Park job toward the upper end is usually rust: a hinge so corroded it has to be cut out rather than unbolted, or a track that needs realignment because decades of humidity have shifted the posts. Loop detector work also trends higher when the asphalt has been re-paved over the original wiring and the new loop has to be cut in. Whatever the number, you get it in writing before we touch anything, and it does not change unless you approve a change.
Neighborhoods We Serve in Union Park
We cover all of Union Park, including the manufactured-home communities and the older apartment complexes where communal entry gates handle heavy daily use.
- Manufactured-home communities along the east side of town
- 1980s-90s apartment complexes with shared entry gates
- Single-family tract neighborhoods bordering the main corridors
- Perimeter-fenced communities off Dean Road and Curry Ford Road
For repair calls in Union Park we typically schedule during the week with a morning or afternoon window, and a live person takes the call no matter the hour.
Service Area – Cities Near Union Park
We serve Union Park locally and coordinate from our South Florida office. Gate work in the surrounding metro is also available in Orlando, FL, with Jacksonville, FL, Miami, FL, and Tampa, FL covered through the same live-answer phone line.
Serving Union Park, FL - Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union Park
Yes. We schedule Union Park repair calls on a weekday window, usually same-week depending on parts. We keep common boards, remotes, and hinges stocked, so a diagnostic visit often turns into a completed repair the same day. Call (626) 649-4572 and a live person will give you the next available slot.
Orange County and individual community associations may each have their own requirements for a new entry gate, especially if it affects shared access or fire department turnarounds. We coordinate the measurements and scope in writing first, and we can help you know what to ask your community’s board before anything is ordered.
We do. The manufactured-home communities and older apartment complexes are some of the most frequent Union Park calls we get, precisely because those shared entry gates run dozens of cycles a day. There is no area of Union Park we exclude from scheduling.
If your gate in Union Park is giving you trouble, call (626) 649-4572. You will get a live person, a straight written price, and a technician who leaves your floors clean. That is the job we focus on.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Union Park Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco