Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fairview Shores, FL
Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair across Fairview Shores, FL. Most of our work here centers on older mid-century homes where lake humidity has done a number on original wrought iron and chain-link gates. If you’re dealing with a seized hinge, a sagging gate, or an operator that died after the last thunderstorm, call (626) 649-4572 and we’ll give you a straight answer on what it takes to fix it.
Why Fairview Shores Homes Are Different
Fairview Shores sits directly on Lake Fairview, and that changes everything about how gates age. The ambient moisture off the water keeps metal components damp far longer than properties even two miles inland, which means rust sets in faster, hinges seize sooner, and gate operator brackets corrode in places you’d never see until the gate starts dragging. We regularly see strike plates so oxidized they crumble when removed, and operator mounting hardware that looks fine from the outside but is structurally compromised underneath.
The housing stock compounds the problem. Most homes here were built between the 1950s and 1970s, and many still have their original gates: ornamental wrought iron around the front yard, galvanized chain-link around pool enclosures. Those frames were never designed for modern automatic operators. When a homeowner wants to add automation to a gate that’s been holding up for sixty years, the frame often needs reinforcement first. We’re not surprised by that anymore; we plan for it.
Because Fairview Shores is unincorporated Orange County rather than City of Orlando, pool gate compliance falls under Florida Statute 515 and Orange County’s building department. Out-of-area contractors who assume Orlando city code applies have failed inspections on self-latching and self-closing hardware. We check the county requirements before we quote, not after an inspector marks it up.
Our Main Fairview Shores Services
Fairview Shores homeowners call us most often for two things: repairing gates that no longer close properly, and bringing old gates up to the point where they can safely carry an automatic operator. Each service has its own Fairview Shores page with full detail.
Gate Repair in Fairview Shores
Gate repair in Fairview Shores usually means replacing rusted hinges, straightening posts that have shifted in sandy soil, or rebuilding latch hardware that’s too corroded to hold. On the older wrought iron gates around Lake Fairview, we often have to remove the gate from its hinges to do the repair properly, which is a two-person job. We quote the full scope before we start, and we cover your floors with drop cloths if the repair takes us inside the gate area of the home. See Gate Repair in Fairview Shores for what a typical repair involves.
Gate Installation in Fairview Shores
New gate installation in Fairview Shores usually starts with an honest conversation about what the old fence line can support. Many properties here have original posts that are fine for a lightweight gate but not for the weight of a modern steel or aluminum frame. We measure, check the posts, and give you a written price that covers the full install, including any reinforcement the county may require. No surprise line items. Details are on the Gate Installation in Fairview Shores page.
Electric Gate Repair in Fairview Shores
Central Florida thunderstorms are merciless on gate operator control boards, and Fairview Shores gets its share. Electric gate repair here frequently means replacing a board that got fried by a nearby lightning strike, or replacing an operator motor that’s been grinding against rusted mounting brackets for months. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The full rundown is on the Electric Gate Repair in Fairview Shores page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fairview Shores
Most Fairview Shores homes with automatic gates run LiftMaster, FAAC, or Linear operators, and we keep common parts for all three in our local stock. We also service Viking, Ghost Controls, and DoorKing systems, which show up on many of the newer installs. Turnaround on common parts is usually same-week. See our brands for the full factory list.
Pricing for Gate Company in Fairview Shores, FL
| Service | Typical range in Fairview Shores |
|---|---|
| Standard gate latch replacement | $85 - $165 |
| Hinge replacement (pair, wrought iron) | $140 - $260 |
| Gate post reinforcement or replacement | $350 - $700 |
| Chain-link gate rebuild | $220 - $420 |
| Wrought iron gate realignment | $180 - $350 |
| Gate operator control board replacement | $280 - $520 |
| Gate operator motor replacement | $420 - $800 |
| Full automation retrofit (frame reinforcement included) | $1,200 - $2,400 |
Corrosion drives prices up in Fairview Shores. When a hinge is too rusted to remove cleanly, the bracketry has to be cut out and replaced, which adds labor. Pool gate work in unincorporated Orange County sometimes needs stronger self-latching hardware than a standard gate, and that’s a compliance cost, not an upsell. Every quote we give is written down before any work begins, and that number doesn’t change unless the scope changes and you approve it first.
Neighborhoods We Serve in Fairview Shores
We work throughout Fairview Shores and the surrounding lakefront blocks, including:
- Lake Fairview shoreline homes
- Silver Pines
- Fairview Park area
- Riverside Acres
- Fairview Shores proper
Most Fairview Shores jobs are scheduled within one to two business days, and we can often arrive the next day for emergency repairs.
Service Area – Cities Near Fairview Shores
Fairview Shores is part of our Central Florida coverage area. If you’re outside Fairview Shores, we also serve Orlando, FL, Jacksonville, FL, Tampa, FL, and Miami, FL through our local crews.
Serving Fairview Shores, FL - Our Local Coverage Area
We’re based in the Fairview Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fairview Shores
For standard gate repairs in Fairview Shores, we schedule within one to two business days. Emergency repairs, like a gate that won’t close and keeps pets from getting out, are usually next-day. Call (626) 649-4572 and a live person answers 24/7.
Fairview Shores is unincorporated Orange County, so gate permits fall under Orange County’s building department, not the City of Orlando. Most simple repairs don’t need a permit, but pool gate work must meet Florida Statute 515 self-latching and self-closing rules. We check this before quoting so there aren’t surprises.
Both. We repair the gate itself, the hinges, the posts, the latch, and the operator when needed. On Fairview Shores homes where the original gate was never designed for automation, we’ll tell you what needs reinforcing before we quote the operator work.
Call Latch & Post for Gate Help in Fairview Shores, FL
If your gate is dragging, rusted, or just won’t stay closed, call Latch & Post Gate Repair at (626) 649-4572. Cody Beckman and our Fairview Shores technicians will give you a written price before anything gets touched, cover the floors, and leave you a photo of the cleanup before we go.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fairview Shores Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco