Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Roanoke, TX
Latch & Post Gate Repair is a Cedarwell-family gate specialist serving Roanoke homeowners with repair, installation, and electric gate work. Roanoke’s gates were largely installed between 2005 and 2020, and a large share of that hardware is now reaching the end of its service life at roughly the same time. That creates a predictable pattern we see across the city: swing-arm operators that worked fine for years suddenly develop travel problems, control boards burn out, and posts that were plumb when the house was built have shifted with the black clay soil. If your gate is acting up in Roanoke, call us at (626) 649-4572 and we’ll give you a straight answer and a written price before any work begins.
Why Roanoke Homes Are Different
Roanoke’s growth along the Highway 114 corridor produced entire neighborhoods of upscale homes in a single build window, and nearly all of them came with either a community entry gate, a private driveway gate, or both. That means gate hardware across whole subdivisions is aging on the same schedule. A swing motor installed in 2009 on Fairway Ranch, for example, has seen the same heat, the same freeze events, and the same soil movement as the motor three streets over in Vista Oaks. We notice this on site: after any weather shift, we see clusters of calls from the same few streets, often with the identical failure mode.
The clay soil under Roanoke is the other factor that shapes the work here. Expansive black clay expands when wet and contracts when dry, which slowly pushes posts out of plumb and changes the travel arc of a swing gate. What looks like a motor problem is often a structural problem underneath it. A Roanoke gate call frequently starts with an operator that only moves halfway or grinds at the end of its travel, and the real fix is re-setting the post, not replacing the board. We’re also mindful of HOA communities here. You may have both a community gate run by the management company and your own driveway operator. We can coordinate with the HOA on the community side while we service your private gate separately.
Our Main Roanoke Services
Roanoke homeowners call us most often about the three services below. Each has its own page covering what the job involves, what it costs, and how we handle it in Roanoke specifically.
Gate Repair in Roanoke
Most repair calls in Roanoke come down to age and soil. A gate that’s been in service for twelve or fifteen years will have one of a handful of failures: a worn gear, a failing control board, a bent hinge, or a post out of plumb. We start by identifying what’s actually failed rather than swapping parts on a guess. On homes where the gate is settled or sagging, we re-plumb the post as part of the repair rather than forcing the operator to fight the soil. If you hear grinding, the gate only opens partway, or the operator runs but the gate doesn’t move, see Gate Repair in Roanoke for the full picture, including typical pricing for the common repairs in this area.
Gate Installation in Roanoke
A new Roanoke gate has to satisfy your HOA’s design standards and stand up to expansive clay. That means the post footings usually need to go deeper than the minimum so the soil’s seasonal shift doesn’t take the gate out of travel alignment within the first year. We measure for the exact swing path on your driveway, confirm the hinge side and opening direction with you before anything is ordered, and give you one written price that covers the gate, hardware, and installation labor. We also discuss operator options at the time of quote so you’re not surprised later by the cost of automation. When you’re ready to replace an existing gate or put in a new one, see Gate Installation in Roanoke.
Electric Gate Repair in Roanoke
When a Roanoke gate operator stops responding, we trace the issue through four levels: the power feed, the control board, the safety loops, and the mechanical operator itself. February 2021’s Winter Storm Uri froze exposed operators across many of the newer subdivisions, and we still find enclosures that were never properly sealed afterward. Moisture intrusion into a control board is one of the most common repeat failures we see here. We test the whole system before leaving so you’re not back in the same spot a week later. If the gate works sometimes but not always, or the remotes stopped syncing, start with Electric Gate Repair in Roanoke.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Roanoke
We factory-train on the operators and control boards that are standard in this market, which means we can usually diagnose and repair a FAAC, BFT, Linear, or Viking opener on the first visit rather than ordering parts and coming back. We carry the common replacement boards, photo eyes, and transmitters for these brands. For the full list of equipment we service, see our brands.
Pricing for Gate Company in Roanoke, TX
Here are the line items most Roanoke gate jobs fall under. Every price is quoted in writing before we touch anything, and that’s the number you’ll see on the invoice unless we find something unexpected and get your sign-off first.
| Service | Typical range in Roanoke |
|---|---|
| Trip fee (applied toward repair if we do the work) | $55-$95 |
| Standard gate-latch replacement | $135-$285 |
| Hinge replacement (pair) | $160-$490 |
| Sagging gate: post re-plumb and re-hang | $340-$780 |
| Control board replacement | $225-$610 |
| Safety loop repair or replacement | $285-$720 |
| Gate operator replacement (parts and labor) | $590-$1,450 |
| Ornamental steel driveway gate replacement | $1,900-$5,400 |
| New automated gate system, installed | $4,200-$12,800 |
Two things push price up in Roanoke more than anywhere else we work: post re-plumbing when clay soil has shifted the gate out of alignment, and HOA approval timelines that can add a few days to a replacement job. Your written quote is the price you pay, and we agree on that number before any work starts, every single visit.
Neighborhoods We Serve in Roanoke
We work throughout Roanoke, including these neighborhoods and the streets around them:
- Fairway Ranch
- Vista Oaks
- Crawford Farms
- Briarwyck
- Roanoke Hills
For repairs and emergency service, we can typically have a technician at your Roanoke home within a few hours. Installation and new operator jobs are scheduled after a free measure, and we’ll give you a written price at that visit.
Service Area – Cities Near Roanoke
We also serve the communities directly around Roanoke, including Flower Mound, TX to the east, Southlake, TX just south, Argyle, TX to the north, and Keller, TX to the west. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and our crews serve Roanoke locally.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Roanoke
For a drive gate that’s stuck open, we can typically have a technician to your Roanoke home within a few hours. Every call is answered by a live person, 24/7, so you’ll get a real answer about timing rather than a voicemail. Call (626) 649-4572 and we’ll tell you when we can be there.
Repairs to an existing gate generally don’t need HOA review. A full gate replacement where style, color, or height might change may need design committee approval. We can help you identify what your specific HOA requires, and we’ll factor their timeline into the schedule so you’re not surprised mid-project.
Measure and written quote are usually available within a few days. After you approve, installation is scheduled based on gate fabrication and any HOA approvals. We’ll give you a firm schedule at the quote, and the final written price is fixed before we order anything. Call (626) 649-4572 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Roanoke Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon