Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Jersey City, NJ
Finding a gate company in Jersey City means finding someone who understands salt air, historic ironwork, and the way a brownstone latch behaves differently from a waterfront tower gate. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on exactly three things: gate repair, gate installation, and electric gate repair. Every job starts with a written price before any work begins, and every call is answered by a live person. If your gate is sagging, seized, or dead at the motor, call (626) 649-4572 and we’ll tell you what we’d do and what it will cost.
Why Jersey City Homes Are Different
Jersey City sits directly on the Hudson River, and that fact shapes almost every gate we touch. Salt-laden air off New York Harbor moves through the streets of Paulus Hook, Van Vorst Park, and Hamilton Park year-round, settling into hinges, rollers, welds, and lock bodies. We regularly see hardware that looks ten years older than it is because the corrosion started early and nobody caught it. A hinge that would last fifteen years in Parsippany might fail in seven here, and the failure tends to happen in spring, when winter freeze-thaw cycles finish what the salt started.
The housing stock compounds the challenge. Late-1800s brownstones in the historic districts often have original wrought iron front gates that are beautiful, brittle, and irreplaceable if someone grinds too hard. Post-2000 towers along the waterfront use automated swing and slide gates at below-grade parking entrances, where trapped humidity and road salt dripping off vehicles eat at track rollers and operator arms. Then there’s the regulatory layer: a visible gate on a brownstone facade in a landmarked district can trigger Landmarks Preservation Commission review before replacement materials or finishes are approved. We flag that early so a repair doesn’t stall mid-job.
Our Main Jersey City Services
The three calls we get most from Jersey City homeowners are a gate that won’t close, a gate that needs replacing, and a gate whose motor stopped listening. Here’s what each involves locally.
Gate Repair in Jersey City
Most Jersey City repair calls start with a latch that won’t catch or a hinge that’s seized from salt corrosion. We’ll disassemble, clean, and lubricate what can be saved, and replace what can’t, matching the existing iron finish where it shows. On brownstone front gates we take care to preserve the original profile. On waterfront parking gates, we check the tracks and rollers for corrosion before anything else. We carry the fasteners and hardware most local gates use, so many repairs finish in one visit. Read more about Gate Repair in Jersey City.
Gate Installation in Jersey City
A new gate in Jersey City has to answer three questions: will it hold up to salt air, will it pass landmark review if it faces the street, and will it swing or slide the way your space allows. We measure, order, and build for the actual site, not a catalog photo. For brownstones, we can source period-profile iron that fits the district’s character. For newer buildings, we focus on powder-coated steel and hardware rated for coastal exposure. You’ll get a written price before anything is ordered. Details on the process: Gate Installation in Jersey City.
Electric Gate Repair in Jersey City
When a motor runs but the gate doesn’t move, or the remote stopped working overnight, it’s usually power, board, or limit switch trouble. In Jersey City, we also look for corrosion at the operator housing and water intrusion at conduit fittings, both common near the river. We service Viking, Ghost Controls, DoorKing, and Elite operators plus most major board brands, and we keep common parts in the van. If we need a board, we tell you the price before we order it. See what’s involved: Electric Gate Repair in Jersey City.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Jersey City
We’re factory-trained on the brands Jersey City homes actually use, including Viking, Ghost Controls, DoorKing, and Elite. That means board-level diagnostics instead of guesswork, and the right part installed the first time. See the full list at our brands.
Pricing for Gate Company in Jersey City, NJ
Here are the ranges we quote most often in Jersey City. Every number below is a starting point, not a guess; your written price reflects your gate, your site, and the parts we agree on before work starts.
| Service | Typical range in Jersey City |
|---|---|
| Gate latch or lock replacement | $85-$185 |
| Hinge replacement (pair) | $120-$260 |
| Weld repair (per point) | $75-$150 |
| Gate realignment and rehang | $150-$325 |
| Full gate installation | $1,300-$4,200 |
| Electric gate motor replacement | $450-$1,100 |
| Electric gate board repair or replacement | $200-$650 |
| Remote, keypad, or sensor replacement | $60-$180 |
| Track and roller replacement (sliders) | $160-$380 |
What pushes price up in Jersey City is usually condition: a gate near the water that needs weld repair plus hinge replacement plus a new latch costs more than a single repair, and we’ll show you each line before we start. Landmark approval can also affect material choices on visible brownstone gates. No work begins until the written price is in your hand and you’ve said yes.
Neighborhoods We Serve in Jersey City
We work all over Jersey City, from the historic brownstone streets of Van Vorst Park and Hamilton Park to the waterfront towers of Paulus Hook and Newport, and across the heights, Greenville, and Bergen-Lafayette. Most repair calls get a same-week appointment, and we can often fix a stuck latch or dead motor the same day when we’re already nearby.
- Van Vorst Park
- Hamilton Park
- Paulus Hook
- The Heights
- Bergen-Lafayette
Service Area – Cities Near Jersey City
Our crews serve Jersey City and the surrounding communities. We also work across the river in Hoboken, NJ, up through North Bergen, NJ and Union City, CA, and south into Bayonne, NJ. Same scheduling, same written-price promise, same shoe covers and drop cloths on every visit.
Serving Jersey City, NJ - Our Local Coverage Area
We’re based in the Jersey City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Jersey City
Not usually. A gate on private property behind the building line typically needs no permit. But a front gate on a brownstone in a landmarked district, like Van Vorst Park or Hamilton Park, may need Landmarks Preservation Commission approval for materials and profile. We tell you up front if yours qualifies. Call (626) 649-4572 and we’ll check before you spend anything.
Most repair calls get a same-week appointment, and if a gate is stuck open or won’t close and secure, we treat it as urgent and move it up. Gates that block a driveway or leave a front entry unsecured usually get the next open slot. Call (626) 649-4572 and a live person will give you the next available time.
Yes. We work on underground parking gates, pedestrian entry gates, and perimeter gates at newer Jersey City condos and HOAs. We know to coordinate with building management, and we always provide a written price the board can review before approval. Call (626) 649-4572 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jersey City Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon