Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aldine, TX
Aldine gate work splits into two clear categories: heavy commercial slide gates along the industrial corridor, and modest residential swing gates on older ranch homes. Both wear differently here than anywhere else in Harris County. The gumbo clay heaves posts out of alignment by winter, and flood events like Harvey left automated operators submerged and slide tracks packed with debris. If you need a gate fixed, installed, or its electric opener brought back to life, call (626) 649-4572 and you’ll get a live person, day or night. Written pricing comes before any work begins, and the 365-Day Done Right Promise covers every visit.
Why Aldine Homes Are Different
Aldine’s residential stock runs heavily to 1960s and 1980s slab-foundation brick ranch homes with chain-link perimeter fencing and swing gates on driven steel posts. That matters because the area sits on Houston’s expansive gumbo clay. It swells when wet, shrinks when dry, and the cycle repeats year after year. A driveway gate that latches cleanly in August can drag the concrete and refuse to close by January after winter rains have heaved its posts. Post realignment is a chronic repeat call here, not a one-time fix. Manufactured homes are also common in parts of Aldine, and their lighter gate hardware on shallow posts feels the same soil movement even faster.
Humidity is the second constant. Steel and wrought-iron gates rust year-round in Aldine’s subtropical air, and painted finishes fail faster than homeowners expect. Then there’s flooding. Portions of Aldine sit within Harris County floodplains, and when water rises, it corrodes weld joints, destroys low-voltage operator electronics, and deposits silt and trash into slide-gate tracks. We see a predictable surge of post-storm repair calls after every major rain event because the damage is rarely visible until a gate stops moving.
Our Main Aldine Services
Aldine homeowners and businesses call us most about two things: a gate that won’t open or close properly, and an electric opener that has failed entirely. Here’s what each involves locally.
Gate Repair in Aldine
A sagging gate in Aldine is usually a soil problem before it’s a hinge problem. We diagnose what shifted, then correct it at the post level rather than just tightening hardware and hoping. That means digging, resetting, re-plumbing, and re-packing the post so the gate hangs true again. Weld cracks from rust and previous flood damage are also common, and we assess those on-site so you know the full scope before approving anything. Every repair starts with a written price, and we protect your floors with shoe covers and drop cloths when the work takes us inside. Gate Repair in Aldine covers the details, including same-visit fixes for latches, drag wheels, and hinge replacements.
Gate Installation in Aldine
New gates in Aldine need posts set below the clay’s active movement zone, or the same heaving that plagues older homes will start warping your investment within two seasons. We plan each installation around the soil, the driveway slope, and whether you want a simple swing or something automated. The brands we install, including FAAC and BFT operators, are chosen because they hold up to humidity and occasional inundation better than entry-level alternatives. You’ll see the full plan and a written quote before any concrete is poured or any post is set. Gate Installation in Aldine walks through what a typical project includes.
Electric Gate Repair in Aldine
Electric gate operators in Aldine fail most often after water exposure, whether from a flood event or years of humidity working on low-voltage connections. We carry replacement control boards, receivers, and safety sensors for the brands Aldine properties actually have, and our technicians are factory-trained on FAAC, BFT, Linear, and Viking equipment. When an opener dies, we trace the fault before replacing parts, because swapping a board without fixing the underlying short just means another service call later. Electric Gate Repair in Aldine explains how we bring dead operators back without replacing the whole gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
We’re factory-trained on the gate operators and hardware Aldine properties use most: FAAC, BFT, Linear, and Viking, among others. Common replacement parts for these brands are stocked locally, which means most repair visits finish the same day rather than waiting on a warehouse order. See our brands for the full list.
Pricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate latch replacement | $120 – $280 |
| Hinge replacement (pair) | $180 – $420 |
| Gate post realignment | $300 – $800 |
| Sagging gate correction | $250 – $600 |
| Weld repair (cracked joint) | $150 – $400 per joint |
| Electric gate diagnostic visit | $75 – $150 |
| Control board replacement | $350 – $900 |
| Safety sensor replacement | $150 – $350 |
| Operator motor replacement | $500 – $1,400 |
| Slide gate track repair | $400 – $1,200 |
| New swing gate (single, standard size) | $1,800 – $4,500 |
| New automated slide gate (commercial) | $6,000 – $18,000 |
What pushes a price higher in Aldine is usually the soil. Posts that have heaved badly need deeper re-setting, and flood-damaged slide tracks often need section replacement rather than straightening. Whatever the job, you’ll see the written price before we touch anything, and that number doesn’t change unless you approve a change first.
Neighborhoods We Serve in Aldine
We work across Aldine and the surrounding unincorporated Harris County pockets, from older ranch-home subdivisions to manufactured home communities and the warehouse corridors along the Hardy Toll Road. Typical response for residential calls in Aldine is same day or next morning, and commercial slide gate emergencies are prioritized because a stuck gate can shut down an entire yard. We serve, among others:
- Northside Aldine
- East Aldine
- Greenspoint-adjacent neighborhoods
- Hardy Toll Road commercial corridor
- Hidden Valley
Service Area – Cities Near Aldine
While our Aldine technicians focus on this community, we also cover nearby areas through our regional dispatch. If your property sits just outside Aldine proper, you’ll find the same written-price promise and same-day scheduling in Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
Most residential calls in Aldine are answered same day or next morning. Commercial slide gate failures in the industrial corridor are prioritized because a gate that won’t open can stop an entire trucking yard. You’ll speak with a live person any time you call, and we’ll give you a realistic arrival window, not a vague promise.
Aldine is unincorporated Harris County, so permit requirements are generally lighter than inside Houston city limits. Most gate repairs need no permit at all, and many installations move forward under Harris County’s standard rules. We’ll confirm what applies to your specific project during the estimate, and we handle permit paperwork when it’s required.
Our technicians wear shoe covers and lay drop cloths before stepping inside, and we use quiet tools when kids are asleep or pets are nearby. Before we leave, we photograph the cleanup so you can see the condition of the work area. This routine is standard on every Aldine job, not an add-on.
For gate repair, installation, or electric gate work in Aldine, call (626) 649-4572 for a free estimate. You’ll talk to a live person, get a written price before anything starts, and every job carries the 365-Day Done Right Promise from Cody Beckman and the Latch & Post Gate Repair team.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco