Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cameron Park, CA
Most gate problems in Cameron Park start with the land. Long driveways climbing Sierra foothill slopes, freeze-thaw winters that heave posts, and summers that bake wood swing gates mean a simple fix in a flat Sacramento neighborhood often turns into a full hinge and motor job here. We’re Latch & Post Gate Repair, part of the Cedarwell family since 2009, and we focus on three things: gate repair, gate installation, and electric gate repair. If your gate is sagging, dragging, or refusing to open, call (626) 649-4572 and a live person answers, day or night.
Why Cameron Park Homes Are Different
Cameron Park sits at roughly 1,200 to 1,500 feet, and that elevation changes how gates age. Winter freeze-thaw cycles push against gate posts from below, cracking concrete footings and loosening hinge anchors in ways valley homes never experience. Come spring, a post that looked plumb in October is leaning half an inch, and a motor that pulled fine suddenly strains against a misaligned track. The summers aren’t gentler: hot, dry conditions bake and warp wood gate components faster than they do in Folsom or El Dorado Hills, and the weight shift throws off whatever was calibrated before the heat arrived.
The housing stock adds another layer. Most Cameron Park homes were built from the 1970s through the 1990s as large-lot custom and semi-custom properties, many with long driveways on sloped parcels and plenty of equestrian or rural-residential acreage. That means lots of pipe-frame and ornamental iron swing gates that are now decades old, with hinges, motors, and posts all wearing out on the same timeline. When we’re called out, the gate usually needs more than the one part the owner noticed.
Our Main Cameron Park Services
The three services Cameron Park homeowners call about most each have their own page. Here’s a quick look at what’s involved here:
Gate Repair in Cameron Park
Sagging swing gates, rusted hinges, bent rollers, stuck latches: most repair calls in Cameron Park come down to hardware that has held weight longer than it was built to. On sloped parcels, a gate that binds at one corner is often fighting both gravity and a post that shifted over winter. We arrive with the common parts stocked across our service vehicles, quote a written price before any work starts, and leave the gate swinging clean. Learn more about Gate Repair in Cameron Park.
Gate Installation in Cameron Park
Installing a gate in Cameron Park usually means working with grade, not against it: measuring for swing clearance on an uphill driveway or setting a slide gate so it doesn’t bind when the ground freezes. We handle the full process, from setting posts in fresh concrete to hanging the gate and locking in the hardware, and we quote before we dig so you know the number before anything happens. Details are here: Gate Installation in Cameron Park.
Electric Gate Repair in Cameron Park
Electric gates here deal with the same terrain and weather, plus one Cameron Park-specific pressure: county fire-evacuation access requirements that push properties toward battery backups and fail-open hardware after the Caldor Fire’s 2021 run. We work on operators from brands like LiftMaster, Viking, Ghost Controls, and DoorKing, and we keep the safety edges and photo eyes aligned so the gate does what it’s supposed to. The full breakdown lives at Electric Gate Repair in Cameron Park.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cameron Park
We’re factory-trained on the gear families around here actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common receivers, sensors, and remote parts stocked so most repairs don’t wait on a shipment. Full detail on our brands.
Pricing for Gate Company in Cameron Park, CA
| Service | Typical range in Cameron Park |
|---|---|
| Gate latch replacement | $180 - $340 |
| Hinge replacement or re-welding | $250 - $600 |
| Gate realignment (sagging gate) | $200 - $450 |
| Wood gate repair / board replacement | $250 - $650 |
| Post stabilization or reset | $450 - $1,100 |
| Track or roller replacement (slide gate) | $350 - $800 |
| Gate opener repair (motor / board) | $400 - $1,100 |
| Gate opener replacement | $1,300 - $3,000 |
| New swing gate installation | $2,200 - $5,500 |
| New slide gate installation | $3,000 - $7,000 |
| Swing gate opener installation | $2,500 - $6,500 |
| Slide gate opener installation | $3,200 - $8,000 |
In Cameron Park, slope and post condition push prices up more than anything else. A reset that needs deep excavation on a hillside costs more than one on flat ground, and older gates often surface hidden rot once we start. What doesn’t change is our method: we hand you a written price before any work begins, and the number on that paper is the number you pay.
Neighborhoods We Serve in Cameron Park
We work throughout Cameron Park, from the Cameron Airpark properties with their legacy slide gates to the lakefront and equestrian lots scattered across the community. Most calls get a same-day or next-day visit, depending on the job and the weather.
- Cameron Airpark
- Lakefront and lake-access communities
- Equestrian and rural-residential parcels
- Cambridge-area subdivisions
- Country Club and golf-course adjacent homes
Service Area – Cities Near Cameron Park
While this page covers Cameron Park specifically, our Cedarwell-family sister locations serve other parts of California as well. For gate work in Los Angeles, CA, San Diego, CA, San Jose, CA, or San Francisco, CA, use those pages for local details and pricing.
Serving Cameron Park, CA - Our Local Coverage Area
We’re based in the Cameron Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cameron Park
Most Cameron Park visits happen same-day or next-day, depending on when you call and what the gate is doing. Emergency calls, like a gate stuck open or refusing to close, get priority. Call (626) 649-4572 and a live person picks up, 24/7.
Some Cameron Park subdivisions have HOA rules covering gate style, height, and finish, and El Dorado County fire-evacuation requirements can affect electric gate hardware. We’re familiar with the local permits process and can often point you to the right office before work starts.
Yes, we cover the full Cameron Park area, including the Airpark district, lakefront properties, and the eastern rural parcels. If you’re unsure whether your property is in our service area, call (626) 649-4572 and we’ll confirm on the spot.
When your gate is sagging, dragging, or not opening at all, call (626) 649-4572 for a free estimate. We’ll give you a written price before any work begins, wear shoe covers and lay drop cloths inside your home, and send a photo of the clean-up before we leave. That’s how we work, on every visit, in every corner of Cameron Park.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cameron Park Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick