Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Universal City, TX
Universal City is a unique place to own a gate. The housing stock here was built largely in the 1970s through 1990s for personnel stationed at Joint Base San Antonio-Randolph, and that means two things we see on nearly every visit: original hardware that has finally worn out, and posts set into Bexar County clay that shifts with every wet-dry season. When you combine those conditions with summer heat above 100°F, you get sagging swing gates, binding hinges, and automated openers that quit without warning. If you need a gate company in Universal City that understands those local conditions, call (626) 649-4572 and we’ll give you a straight diagnosis and a written price before any work begins.
Why Universal City Homes Are Different
We work on a lot of gates across the San Antonio area, and Universal City jobs are consistently different in one way: the soil. Bexar County’s black gumbo clay expands when wet and contracts when dry, and that cycle puts steady pressure on gate posts. Many older Universal City homes have posts set into concrete footings that only go 12 to 18 inches deep, because the builders hit caliche hardpan and stopped digging. Thirty or forty years of clay movement later, those footings are cracked and the post has leaned or heaved. The gate itself may look like the problem, but the foundation underneath it usually tells the real story.
The housing stock matters too. Most neighborhoods around Randolph AFB were built as ranch-style subdivisions with wood privacy fences and swing gates at the side yard, plus a good number of wrought-iron driveway entries. Original hinges, latches, and gate frames from that era are now well past their expected lifespan. Add in the constant PCS turnover among military families, and you have rental properties where a broken gate may have been left unfixed for months before a new tenant moves in. That’s why we often see deferred gate maintenance here that you wouldn’t find in more stable suburbs.
Our Main Universal City Services
Most calls we get from Universal City homeowners fall into three categories, and each one has its own dedicated resource with local pricing and job details.
Gate Repair in Universal City
When a gate won’t close, drags on the ground, or the latch won’t catch, we start by checking what’s actually failing: the hardware, the frame, or the post footing beneath it. In Universal City, a leaning post from clay heave is as common a culprit as a worn hinge. We service hardware from brands like Viking and DoorKing, and we always write the price down before we touch anything. Gate Repair in Universal City covers what we look for, what typical repairs cost, and how fast we can get to you.

Gate Installation in Universal City
New gates in Universal City should be designed around the soil they’ll stand in. That means post footings dug past the caliche layer where possible, concrete set below the clay movement zone, and framing that can handle summer heat without warping. We walk every installation with you first, measure twice, and give you a written price that includes the full job: post setting, gate hanging, latch and hardware, and cleanup. Gate Installation in Universal City explains the process and what a full install typically runs.

Electric Gate Repair in Universal City
Electric gate openers are the first thing to fail in a Universal City summer. Heat degrades plastic gears, rubber rollers, and circuit boards faster than most homeowners expect. We troubleshoot openers from Ghost Controls, Elite, and other common brands, and we check the gate’s mechanical alignment before touching the electronics, because a dragging gate will burn out a new opener just as fast as it did the old one. Electric Gate Repair in Universal City goes into the diagnostics and typical repair costs.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Universal City
Our technicians are factory-trained on the brands families in Universal City actually own, including our brands like LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common parts on the truck so most repair visits finish same-day.
Pricing for Gate Company in Universal City, TX
| Service | Typical range in Universal City |
|---|---|
| Standard gate latch replacement | $120 - $240 |
| Sagging gate repair (hinge and post adjustment) | $180 - $340 |
| Driveway gate post reset (concrete footing re-pour) | $350 - $650 |
| Wood gate frame rebuild | $280 - $520 |
| Wrought-iron gate repair (weld and straighten) | $220 - $450 |
| Electric opener diagnostic visit | $85 - $140 |
| Electric opener replacement (parts and labor) | $450 - $1,100 |
| Safety sensor replacement | $140 - $260 |
| Keypad installation | $180 - $300 |
| Full single swing gate installation (6 ft, hardware included) | $900 - $1,800 |
What pushes price up in Universal City is usually the post. If the old footing is cracked or shallow, we’ll quote the re-pour as a separate line item so you can see exactly where the money goes. Every quote is written, itemized, and agreed before we start, so there’s no surprise invoice at the end.
Neighborhoods We Serve in Universal City
We work across Universal City, from the older ranch-style subdivisions near the base to the newer properties along the eastern edge of town. Response time for gate repair calls in Universal City is generally same-day or next-day, depending on when you reach us. We regularly serve:
- Olympia Hills
- Meadowbrook
- Rose Garden
- Universal City neighborhoods near JBSA-Randolph
- The residential pockets along Pat Booker Road
Service Area – Cities Near Universal City
We also take calls from homeowners in nearby communities who need the same careful approach. Our techs regularly work in Schertz, TX, Converse, TX, and Cibolo, TX. If you’re further out, our San Antonio dispatch office coordinates routes for the whole metro area, including San Antonio, FL.
Serving Universal City, TX - Our Local Coverage Area
We’re based in the Universal City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Universal City
Most gate repair calls in Universal City can be scheduled same-day or next-day. Emergency calls, like a gate that won’t close and is leaving your yard open, get priority. Call us and a live person will tell you exactly when a tech can be there.
Some Universal City neighborhoods have HOA design rules that apply to driveway gates and fence lines. We’re familiar with the common requirements and can work with your HOA’s specs, but we recommend you confirm approval before a full installation. Repairs to an existing gate rarely need anything.
Yes, and it’s how every installation starts. We measure, check the soil and post depth, and talk through materials and hardware with you. Then we write the full price down so you can think it over without pressure.
If your gate is sagging, stuck, or just won’t latch the way it used to, call Latch & Post Gate Repair at (626) 649-4572. Cody Beckman and the team will give you a straight answer, a written price, and a clean work site when they leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Universal City Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide





Before
After
Before
After
Before
After