Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Crowley, TX
Gate repair in Crowley usually comes down to two things: the clay under the posts and the age of the opener on top. Most homes here were built between 2000 and 2015, and the ornamental iron and cedar gates installed during that boom are now hitting the 10-to-20-year failure window all at once. We work on those gates every week, and we know what Crowley’s soil does to them. If you need a straight answer on whether a gate can be saved or should be replaced, call us at (626) 649-4572.
Why Crowley Homes Are Different
Crowley’s southwestern Fort Worth subdivisions grew fast, and the gates went in on Blackland Prairie clay. That clay is the main character in most repair stories here. It expands when wet and contracts in drought, which pushes gate posts out of plumb season after season. A gate that closes clean in March can drag on the latch by August, not because the hardware failed, but because the post moved half an inch with the soil. Technicians who only know sandy-soil cities get confused by this. We don’t.
The housing stock adds another layer. HOA-specified ornamental iron driveway gates and cedar privacy gates are standard across Crowley, and many were installed by the same handful of builders working the corridor during the mid-2000s. That means when we see a specific opener board fail in one subdivision, we often see the same board failing in three others nearby. Parts for that era, like discontinued Logic 5 and ET series control boards, are genuinely hard to find. We keep working relationships with parts suppliers who can still get them, which matters when you’d rather repair a good opener than replace it.
Summer heat does its part too. Cedar boards warp, rubber seals on operators crack, and hinges stiffen. By late summer, a gate that was quiet in May starts groaning. None of this is mysterious. It’s just what almost two decades of North Texas weather does to gate hardware, and it’s why we schedule a lot of seasonal alignment calls each spring and fall.
Our Main Crowley Services
Most Crowley homeowners call us for one of three things: a gate that won’t close, a gate that needs to be built, or an electric opener that stopped responding. Each has its own page with the full story.
Gate Repair in Crowley
When a gate post heaves in Crowley clay, the latch and hinges take the stress. We see bent latch plates, sagging gate frames, and stripped hinge screws more than anything else. A repair usually starts with diagnosing whether it’s the hardware that failed or the post that moved. From there, we pull the gate back into alignment, replace what’s worn, and set it so it closes cleanly against the post. Most repairs are done in a single visit. Gate Repair in Crowley
Gate Installation in Crowley
New gates in Crowley need deeper post setting than most homeowners expect. With the Blackland Prairie clay contracting in drought and swelling after rain, a shallow footing means a leaning gate within two years. We size the post holes for the soil, not just the gate, and we ask about the home’s HOA before we quote, since many Crowley subdivisions have design requirements for materials and height. You’ll get a written price before we order anything. Gate Installation in Crowley
Electric Gate Repair in Crowley
Crowley’s mid-2000s construction wave put a lot of automated openers in service at the same time, and those openers are aging together. The most common calls are for openers that hum but don’t move, remotes that stopped pairing, and safety sensors that trip for no clear reason. When a Logic 5 board dies, we can often source a replacement rather than selling you a full opener swap you don’t need. Electric Gate Repair in Crowley
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Crowley
We’re factory-trained on the brands North Texas homeowners actually own, including Linear, Viking, Ghost Controls, and DoorKing. We keep common parts for those brands in our local stock, which means many repairs happen the same day without waiting on a shipment. If you’re not sure what brand your opener is, call and we’ll help identify it. See our brands for the full list.
Pricing for Gate Company in Crowley, TX
| Service | Typical range in Crowley |
|---|---|
| Gate latch replacement | $295 - $525 |
| Gate hinge replacement | $250 - $450 |
| Gate post reset (single post) | $575 - $1,175 |
| Gate alignment adjustment | $175 - $325 |
| Opener circuit board replacement | $375 - $725 |
| Electric gate safety sensor repair | $275 - $475 |
| New ornamental iron driveway gate (single) | $3,800 - $9,500 |
| New cedar privacy gate | $750 - $1,900 |
| New gate opener installation | $1,750 - $3,400 |
| Full electric gate package (gate + opener + posts) | $6,500 - $13,000 |
In Crowley specifically, the biggest price driver is the post footing. If the clay has shifted a post more than a few degrees, a simple gate swap becomes a post reset with new concrete, and that adds real labor. The second driver is opener age: mid-2000s boards are harder to source and sometimes cost more than a current model. Whatever the job, you’ll see the exact number in writing before we start, and that number doesn’t change unless you approve additional work first.
Neighborhoods We Serve in Crowley
We work across Crowley’s full footprint, from the newer southwest subdivisions to the established streets near the city center. Our technicians are local to the corridor, so a Crowley call doesn’t wait on someone driving from across the metroplex.
- Hunters Ridge
- Summer Creek
- Crescent Springs
- Oak Grove
- Silverleaf
Service Area – Cities Near Crowley
While this page is about Crowley, our gate crews also serve the surrounding communities. We work regularly in Burleson, TX to the south, Joshua, TX further down the corridor, and Kennedale, TX to the northeast. If you’re in Arlington, WA, that’s a different Latch & Post team entirely, but the same standards apply.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Crowley
Yes. We answer calls with a live person 24/7, and we do our best to schedule same-day visits for Crowley homeowners. Your exact arrival window depends on the day’s route, but we’ll give you a real time range on the phone, not a vague “sometime this week.” Call (626) 649-4572 and we’ll tell you honestly what’s available.
Many Crowley subdivisions have HOA rules that cover gate height, material, and sometimes opener brands. We’ll ask which community you’re in before we quote, and we’ll work with those requirements. If the HOA needs a written description of the work, we can provide one. Our goal is a gate that passes inspection the first time.
Crowley is inside our standard service area. We don’t add a trip charge for the city itself. The only costs are the parts and labor you’ll see in the written price before we begin. Calls are answered around the clock, and the estimate is free.
For a straight answer about your gate, call us at (626) 649-4572. We’ll talk through what you’re seeing, give you a realistic price range, and schedule a visit when it works for your family.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crowley Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide