Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Seagoville, TX
Seagoville gates contend with something most Dallas-area suburbs never see: Blackland Prairie clay that swells in wet winters and shrinks hard in summer, pushing gate posts out of plumb season after season. The housing stock here splits between older acreage properties with welded pipe gates and newer subdivisions with automated ornamental iron, so the right gate company in Seagoville, TX has to understand both farm-style fabrication and modern opener electronics. Latch & Post Gate Repair does exactly that. Call (626) 649-4572 any hour, and a live person answers.
Why Seagoville Homes Are Different
The soil is the quiet driver of most Seagoville gate failures. The dense expansive clay under the Blackland Prairie heaves and contracts between wet winters and dry summers, and that movement steadily torques gate posts out of alignment. A gate that swings fine in March can bind or rack by August, not because the hinges wore out but because the post itself moved. On the older acreage lots along the eastern and southern edges of Seagoville, the story shifts to rust: galvanized pipe gates welded decades ago by the original landowners are still standing, but the pipe has often corroded through at the ground collar where it meets standing water in low-lying clay. Post-base rot and weld failure are the most predictable failures our technicians find here, more often than broken hinges or opener boards.
The housing stock reflects that split. Older semi-rural properties from the 1960s through the 1990s feature pipe-and-cable farm-style driveway gates, while the newer subdivisions from the 2000s onward lean toward ornamental iron and steel swing gates on automated operators. North Texas freeze events add another layer. The extended hard freeze of February 2021 cracked gate operator housings, seized lock mechanisms, and snapped actuator components that were not built for prolonged sub-freezing temperatures. Summer heat then shifts asphalt and concrete driveways, stressing post anchors already loosened by clay-soil cycling. Most standard latch replacements in Seagoville run between $120 and $280, and a full post re-set with concrete typically ranges from $450 to $900, depending on how far the post has moved.
Our Main Seagoville Services
Most calls from Seagoville homeowners come down to two things: a gate that will not latch properly after the soil shifted, or an electric opener that stopped responding after a storm or a hard freeze. These three service pages cover the work we do across the area.
Gate Repair in Seagoville
Gate Repair in Seagoville starts with the post, not the hardware, because on Blackland Prairie clay the post is usually what moved. We re-set posts with fresh concrete, re-align hinges, repair or replace rusted-through pipe at the ground collar, and replace latches, locks, and drop rods. On acreage properties with welded pipe gates, we cut out the rusted section and weld in new material at the same gauge, then paint the repair to match. Every visit includes a written price before any work begins, shoe covers and drop cloths when we step inside, and a photo of the clean-up before we leave.
Gate Installation in Seagoville
Gate Installation in Seagoville covers new driveway gates, pedestrian gates, and replacement gates built for the clay soil that moves posts over time. We set posts deeper than standard practice calls for, with concrete footings sized for the gate’s weight and the soil’s expansion cycle. Whether you need a farm-style pipe gate on an acreage property or an ornamental steel gate on a newer subdivision lot, the gate gets sized, quoted in writing, and installed without pressure. We cover the floor and wear shoe covers on every visit, even when the work is entirely outdoors.
Electric Gate Repair in Seagoville
Electric Gate Repair in Seagoville addresses operators that seized after a freeze, boards that failed after a lightning strike, limit switches that lost position after a storm, and battery-backup systems that drained during an outage. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units, and our technicians arrive with the parts most Seagoville gate opener failures require already on the truck. Written price before any work starts, always.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Seagoville
Our Seagoville technicians carry parts for the brands families actually own: FAAC, Linear, BFT, and Viking, among others. That means a failed limit switch or a seized actuator often gets replaced on the first visit rather than ordered and scheduled for a second. See our brands for the full list of equipment we service.
Pricing for Gate Company in Seagoville, TX
| Service | Typical range in Seagoville |
|---|---|
| Gate latch replacement | $120 - $280 |
| Hinge replacement (pair) | $200 - $480 |
| Gate post re-set with concrete | $450 - $900 |
| Weld repair on pipe gate | $200 - $500 |
| Operator electrical diagnosis | $140 - $300 |
| Limit switch replacement | $180 - $400 |
| Gate opener circuit board replacement | $350 - $900 |
| Remote replacement or programming | $100 - $250 |
| Safety sensor replacement | $220 - $450 |
| Standard full gate installation (single swing) | $2,800 - $7,000 |
Prices in Seagoville push toward the upper end of those ranges when a post has moved far enough that the concrete footing needs to be dug out and re-poured rather than shimmed, or when a welded pipe gate has rusted through in multiple sections at once. What you will not see is a surprise: every Latch & Post visit includes a written price before any work begins, and the number on that sheet is the number you pay.
Neighborhoods We Serve in Seagoville
We work across Seagoville, from the older acreage parcels on the eastern and southern edges where pipe gates and low-lying clay dominate, to the newer subdivisions where automated ornamental iron is standard. Typical response across the area is same-day when the call comes in before early afternoon, and next-day for everything else.
- Acreage properties east of Highway 175
- Acreage properties south of US-175 toward the Trinity River bottom
- Subdivisions north of Malloy Bridge Road
- Residential streets around Seagoville Road and Kaufman Street
- Newer developments near the Community Center
Service Area – Cities Near Seagoville
Latch & Post serves Seagoville and the surrounding communities from our local scheduling setup, with dispatch coordinated from the Cedarwell family’s Dallas-Fort Worth office. If you are in a neighboring city, the same written-price and clean-up standard applies. See our pages for Balch Springs, TX, Wilmer, TX, Hutchins, TX, and Mesquite, NV.
Serving Seagoville, TX - Our Local Coverage Area
We’re based in the Seagoville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Seagoville
Most Seagoville calls before early afternoon get same-day service, and calls after that are scheduled for the next morning. A live person answers the phone 24/7, so you will have a time window on the first call, not a voicemail.
Newer Seagoville subdivisions with HOAs often have design standards for driveway gates, especially on streets visible from main roads, so check your covenants before a full installation. Repairs to an existing gate rarely trigger approval, and we can work around whatever your HOA requires.
Every visit includes shoe covers and drop cloths whenever we step inside, and the technician takes a photo of the clean-up before leaving. That is part of the Cedarwell C.A.R.E. values, not an add-on, and it applies to every job in Seagoville.
If your gate is binding, leaning, rusted through, or the opener stopped after a freeze, call (626) 649-4572. A live person answers, the estimate is free, and the price you get in writing before the work starts is the price you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Seagoville Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco