Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Millbrae, CA
We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist serving Millbrae homes with gate repair, gate installation, and electric gate repair. Millbrae’s position beside SFO flight corridors and the bay creates a combination most Peninsula cities don’t deal with: heavy gates built to mute aircraft noise, and salt air that corrodes hinges, welds, and operators faster than inland. If your Millbrae gate is sticking, sagging, or refusing to open, call (626) 649-4572 and a live person answers, day or night.
Why Millbrae Homes Are Different
Millbrae’s flatlands between El Camino Real and the Bayshore are dense with 1950s and 1960s ranch-style tract homes. Many still carry their original wrought iron side gates or early chain-link enclosures, and those are now decades past their expected service life. The failure we see most in these neighborhoods is rust at the hinge welds and post bases, accelerated by year-round marine moisture off the bay.
The hillside streets above Millbrae Avenue tell a different story. Driveway swing gates here were often installed without accounting for upslope grade. As the ground settles, the gate arc drags into the driveway surface on the uphill side. The fix is rarely a simple hinge adjustment. More often, it becomes a cantilever slide-gate conversion, which moves the gate onto a rolling carriage and off the settling ground entirely.
Fog convergence in the hills adds one more wrinkle: moisture cycling that rots wood gate posts right at the concrete anchor point. We see this failure mode in Millbrae far more than in Daly City or Redwood City, and the repair means setting a new steel post in fresh concrete rather than patching rotted wood.
Our Main Millbrae Services
The two calls Millbrae homeowners make most are for rusted or sagging existing gates and for new driveway gates on hillside lots. Here’s how each works here.
Gate Repair in Millbrae
Most Millbrae gate repairs start with rust. Salt-laden air off the bay works on uncoated steel hinges, latch posts, and welds until the gate leans or won’t latch at all. We remove the corroded hardware, replace it with galvanized or powder-coated parts, and reset the gate so it swings clean. On hillside properties, we check the grade before adjusting anything, because a gate dragging on an upslope is a symptom of settlement, not just a bent hinge. See the full breakdown on our Gate Repair in Millbrae page.
Gate Installation in Millbrae
New gates in Millbrae have to answer two local questions: how much wind and noise does the gate need to block, and what slope is the post going into. Solid-panel driveway gates are common on the east side for aircraft noise reduction, while the hillside lots often call for slide gates that won’t drag on grade. We measure, order, and schedule installation with a written price before any work begins, so you know the full number on day one. Details are on the Gate Installation in Millbrae page.
Electric Gate Repair in Millbrae
Electric gate operators in Millbrae work against salt air and constant moisture, so circuit boards, limit switches, and motor housings corrode faster than inland. We carry parts for FAAC, BFT, Linear, and Viking, and we test the full safety loop, photo eyes, and edge sensors on every electric repair. A gate that opens but won’t close, or reverses mid-cycle, usually points to an obstruction sensor or board fault rather than the motor itself. Read specifics on our Electric Gate Repair in Millbrae page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Millbrae
We’re factory-trained on the gate operators Millbrae homes actually have: FAAC, BFT, Linear, and Viking are the ones we service most often here, and we keep common boards, remotes, and safety-edge parts on our trucks. That means most electric repairs are diagnosed and finished on the first visit. You can see the full list on our brands page.
Pricing for Gate Company in Millbrae, CA
| Service | Typical range in Millbrae |
|---|---|
| Standard gate-latch replacement | $145 - $285 |
| Hinge replacement (pair) | $180 - $340 |
| Sagging gate realignment | $220 - $410 |
| Post reset in concrete | $340 - $590 |
| Wood post replacement (steel post set) | $450 - $740 |
| Cantilever slide-gate conversion | $1,900 - $4,200 |
| Electric operator board replacement | $260 - $520 |
| Photo eye / safety sensor replacement | $175 - $310 |
| New driveway swing gate (single) | $1,400 - $3,200 |
| New slide gate with operator | $3,800 - $7,500 |
Salt corrosion and hillside grade issues push Millbrae pricing toward the upper ends of these ranges when rust has spread to multiple components or when a conversion is needed instead of a hinge adjustment. Whatever the number, you’ll see it in writing before we touch anything, and it’s the exact price you pay.
Neighborhoods We Serve in Millbrae
We work across all of Millbrae, from the bay-facing flatlands to the hillside streets above Millbrae Avenue.
- Downtown Millbrae and Hillcrest
- The flatlands between El Camino Real and the Bayshore
- Taylor Boulevard corridor
- Mills Estate and the western hillsides
- Bayview and the eastern frontage
Most Millbrae calls are answered same day, and we schedule electric and installation work at a time that fits your week.
Service Area – Cities Near Millbrae
Latch & Post Gate Repair serves Millbrae and the surrounding Peninsula cities. We also work in San Bruno, CA, Burlingame, CA, South San Francisco, CA, and Pacifica, CA. Dispatch and scheduling are coordinated from the brand’s San Francisco Bay Area office, and crews serve Millbrae locally.
Serving Millbrae, CA - Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Millbrae
We answer every call live, 24/7. For a gate that won’t close or latch, which is a real security issue, we aim for same-day response in Millbrae, and we’ll tell you straight when you call what the realistic arrival window is. Call (626) 649-4572 and you’ll talk to a person, not a recording.
Most gate repairs and like-for-like replacements don’t require a Millbrae permit. New automatic driveway gates can trigger a review if they include new electrical runs or substantial post concrete work. We’ll flag what applies to your specific street and gate, and we handle the written scope so your quote reflects any required approval.
Yes, regularly. The grade-settlement issues on those streets are exactly the jobs we take on most. We’ll check whether your gate is dragging from a hinge problem or from ground movement before quoting, because fixing the wrong cause means the gate starts dragging again in a year. Call (626) 649-4572 for a free estimate, and we’ll put the full number in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Millbrae Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide