Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in The Crossings, FL
Latch & Post Gate Repair is a gate company serving The Crossings, FL, focused exclusively on gate repair, gate installation, and electric gate repair. The Crossings was built mostly between the late 1970s and early 1990s, which means the original aluminum and ornamental-iron gate systems across the community are now 30 to 45 years old and failing at scale. Salt air from Biscayne Bay accelerates corrosion, and the area’s afternoon lightning storms put real stress on electric operators and control boards. We answer every call live at (626) 649-4572, any hour.
Why The Crossings Homes Are Different
The Crossings is a dense cluster of HOA-governed gated communities, most developed as planned single-family subdivisions and townhome clusters between roughly 1978 and 1995. The shared vehicular entry gates from that era are now reaching the end of their working life at the same time, and many have first-generation operators that manufacturers no longer support. When those operators fail, the board or homeowner faces a decision: patch it, or bring the entire system up to current Miami-Dade County code.
That code is the part that separates The Crossings from most other South Florida markets. The cross area sits in Miami-Dade’s High Velocity Hurricane Zone, or HVHZ, which means any gate operator or structural hardware replacement must carry a verified Miami-Dade Notice of Acceptance and meet wind-load standards stricter than surrounding counties. An out-of-area contractor who installs a nationally popular operator without confirming its NOA can face a failed inspection and a costly tear-out. We see that happen regularly enough that we verify approval before any install. The salt-laden air also gets into hinges, tracks, and electrical contacts faster than inland markets, so a gate that worked fine in Kendall might seize up a few miles east near the bay. And from June through September, afternoon lightning storms produce one of the highest lightning-strike-density corridors in the US, which is why control-board and loop-detector replacements spike every summer across The Crossings.
Our Main The Crossings Services
The two calls we hear most often from The Crossings are for aging swing and slide gate systems that have stopped operating, and for full replacements where an HOA or homeowner wants a modern operator that will pass a Miami-Dade inspection. All three of the services below are covered by the same written-price rule and 365-Day Done Right Promise.
Gate Repair in The Crossings
Most gated communities in The Crossings were built with aluminum or ornamental-iron swing and slide gates, and the original hinges, rollers, and track hardware are now decades old. Salt air accelerates wear on hinge pins and track rollers, so a gate that rubs or drags may seem sudden but usually started corroding months earlier. Our technicians diagnose on site, show you the worn parts, and put the price in writing before any work begins. We stock common replacement hardware for the swing and slide systems typical of this area, which keeps most repairs to a single visit. Gate Repair in The Crossings

Gate Installation in The Crossings
A new gate in The Crossings is rarely a simple swap. The post footings, the gate weight, and the operator’s wind-load rating all have to line up with Miami-Dade’s HVHZ code, and most HOAs here also require architectural review before work starts. We help with the measurements and hardware selection, and we only recommend operators with a current Miami-Dade NOA, so the inspection passes the first time. Our team handles the full install: posts, hinges or rollers, operator, safety edges, and the final code-required adjustments. Gate Installation in The Crossings

Electric Gate Repair in The Crossings
Electric gate failures in The Crossings happen most often after an afternoon storm. Lightning strikes are common in this corridor, and a surge does not always leave visible damage. The control board, loop detector, or a low-voltage wire near the operator may have failed while the gate itself still looks fine. We carry replacement boards and loop detectors for the FAAC, BFT, Linear, and Viking systems used most in this market, and we test the full circuit, not just the part that looks burnt. The price is quoted before we open anything. Electric Gate Repair in The Crossings

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in The Crossings
We are factory-trained on the operator brands families and HOAs in The Crossings actually have: FAAC and BFT hydraulic operators are common on older swing gates, while Linear and Viking show up frequently on slide and newer systems. We keep control boards, loop detectors, and safety-edge parts in local stock for those brands, which means most electric repairs go from diagnosis to finished work in one visit. See our brands for the full list we service.
Pricing for Gate Company in The Crossings, FL
Prices below are the ranges we typically see on The Crossings jobs. Every quote is written and agreed before work starts, so the number you see is the number you pay.
| Service | Typical range in The Crossings |
|---|---|
| Diagnostic visit (applied to repair if you proceed) | $59-$89 |
| Gate-latch replacement | $110-$240 |
| Hinge replacement (aluminum or iron swing gate) | $160-$320 per pair |
| Track or roller replacement (slide gate) | $180-$380 |
| Control-board replacement (FAAC, BFT, Linear, Viking) | $260-$540 |
| Loop-detector replacement | $220-$420 |
| Safety-edge or photo-eye replacement | $180-$380 |
| Full operator replacement, HVHZ-approved | $900-$1,800 |
| Standard manual gate installation | $1,400-$3,200 |
| Electric gate installation (gate, operator, safety edges) | $3,000-$7,500 |
| HOA shared-entry gate system repair | $400-$950 |
Two things push prices up in The Crossings more than anywhere else. First, the HVHZ requirement means an operator without a Miami-Dade NOA cannot legally be installed, so the parts cost more than a generic big-box unit. Second, salt-air corrosion often means a simple board swap turns into a board plus rewiring job once we see the condition of the terminals. Either way, you’ll see the full amount in writing before we touch anything.
Neighborhoods We Serve in The Crossings
We cover every gated subdivision and townhome cluster in The Crossings, including the HOA communities where the original gate hardware is now at or past its service life. Our dispatch is coordinated from the Miami (South FL) office, which puts a technician within a short drive of most The Crossings calls.
- Original single-family subdivisions in the western section
- Planned townhome clusters along the community’s main entry corridors
- HOA-governed communities with shared vehicular entry gates
- Neighborhoods bordering Kendall to the south and west
- Areas near the community’s school and park access roads
Service Area – Cities Near The Crossings
If your gate is just over the line, we also serve Jacksonville, FL, Miami, FL, Tampa, FL, and Orlando, FL. All work carries the same written-price rule, cleanup routine, and 365-Day Done Right Promise, whichever local team arrives.
Serving The Crossings, FL - Our Local Coverage Area
We’re based in the The Crossings area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in The Crossings
Most The Crossings calls get a same-day or next-day visit, depending on the season. Summer storm months fill the schedule quickly because lightning damage spikes across the area. Evening and weekend dispatch is available for gate failures that leave a community’s entrance inoperable.
Yes, in most cases. The Crossings HOAs usually require architectural or property-management sign-off, and the county requires a permit for any gate operator replacement or structural change. We can advise on what your specific community requires and ensure the hardware is Miami-Dade NOA-approved before purchase.
Always. Our technicians put on shoe covers and lay drop cloths before stepping inside your home or garage, and they take a photo of the clean-up before leaving. It is part of the Cedarwell Care Promise on every visit, at no extra charge.
Call (626) 649-4572 and describe what your gate is doing. We’ll schedule a diagnostic visit, apply the visit fee to any repair you approve, and give you the full price in writing before work starts. Quotes are free, and there’s no pressure to proceed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Crossings Customers Say
"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide





Before
After
Before
After
Before
After