Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Ennis, TX
Ennis gates fail differently than gates in Dallas or Fort Worth. The black gumbo clay under this town heaves and shrinks through every wet-dry cycle, tilting posts and pulling latches out of alignment month after month. We work on everything from mid-century chain-link gates in older in-town neighborhoods to 16-foot pipe livestock gates on ranch parcels and ornamental iron driveway gates along the I-45 growth corridors. If your gate sticks, drags, or won’t close, call (626) 649-4572 and we’ll send a technician who knows Ennis soil before touching a hinge.
Why Ennis Homes Are Different
Ennis sits on the Blackland Prairie’s black clay, and that single fact drives most of the gate work here. The soil swells after fall and spring rains, then cracks and contracts through North Texas summer droughts. A gate post set in that clay can move a half-inch or more in a single season. The result is a gate that swings shut on its own in August, then won’t latch in October. We probe post depth and inspect the concrete collar for cracking or uplift before adjusting any hardware, because on black gumbo a recurring misalignment almost always means the post has moved, not the latch has failed.
The housing stock compounds it. Older in-town homes have basic wood and chain-link gates built decades ago, often with shallow footings. Working ranch parcels need heavy pipe gates that cattle lean against. Newer subdivisions along I-45 have ornamental iron driveway gates with automated openers, and those systems get stress-tested every time an Ellis County ice storm glazes the hinges and opener arms. One town, three very different gate problems.
Our Main Ennis Services
Most Ennis calls fall into two camps: a gate that won’t work anymore, and a gate that’s being replaced or added. Each service has its own Ennis page with full pricing and details.
Gate Repair in Ennis
Most repair calls in Ennis start with a gate that drags on the ground or won’t catch the latch. On black clay, the fix usually begins at the post. We reset footings, re-plumb posts, and only then adjust hinges and latches so the repair holds through the next wet-dry cycle. We work on wood, chain-link, pipe, and ornamental iron. Full details, including pricing and what to expect, are on the Gate Repair in Ennis page.
Gate Installation in Ennis
New gates in Ennis need footings engineered for black gumbo, not a generic concrete pour. We set posts deeper than standard, use proper drainage around the collar, and build for the gate’s actual weight. Whether it’s a simple side-yard gate or a 16-foot ranch entrance, the installation page covers materials, lead times, and the written-price process. See Gate Installation in Ennis for the full scope.
Electric Gate Repair in Ennis
Automated gates in Ennis take abuse from ice storms and summer heat. Opener arms bind, circuit boards corrode, and safety sensors drift out of alignment. We diagnose the operator first, then check the gate’s physical movement, because an opener working against a shifted post will burn out again. Brands include Ghost Controls, Viking, and DoorKing. Full diagnostics and pricing are on the Electric Gate Repair in Ennis page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ennis
We’re factory-trained on the gate openers Ennis families actually have: Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Common opener parts are stocked in our DFW parts bench, so most Ennis repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Company in Ennis, TX
| Service | Typical range in Ennis |
|---|---|
| Gate latch replacement | $85 - $185 |
| Gate hinge replacement | $80 - $150 per hinge |
| Gate post reset (single post) | $150 - $325 |
| Gate alignment on black clay soil | $100 - $220 |
| Chain-link gate fabric replacement | $95 - $240 |
| Wood gate rebuild (cedar frame) | $200 - $425 |
| Pipe livestock gate (12-16 ft) install or reset | $350 - $700 |
| Ornamental iron drive gate install | $750 - $1,900 |
| Opener motor replacement | $250 - $550 |
| Safety sensor or limit switch repair | $110 - $220 |
| Keypad or intercom wiring repair | $110 - $230 |
| Opener arm or bracket repair | $120 - $260 |
Two things push Ennis prices toward the higher end: post work on black gumbo (which takes longer to do correctly) and heavy pipe gates that need equipment to maneuver. You’ll see the exact written price before any work starts, every visit, no exceptions.
Neighborhoods We Serve in Ennis
We cover the entire Ennis area, including the older in-town grid, the ranch parcels east and south of town, and the newer subdivisions along the I-45 corridor.
- Downtown and the historic in-town neighborhoods
- Lakeside and Chapel Creek
- Bristol and the surrounding ranch parcels
- I-45 corridor subdivisions
- Alma and Bardwell areas
Most Ennis calls get a same-day or next-day visit from our DFW-based dispatch, depending on when you call.
Service Area – Cities Near Ennis
Latch & Post Gate Repair works throughout Ellis County and the southern Dallas-Fort Worth corridor. If you’re just outside Ennis, we also serve Waxahachie, TX, Red Oak, TX, Wilmer, TX, and Lancaster, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Ennis locally.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ennis
Most Ennis repairs are scheduled same-day or next-day. Emergency calls are answered by a live person 24/7, and we’ll get a technician out as soon as one is available. Call (626) 649-4572 for the current schedule.
Most residential gate repairs and replacements don’t require a permit in Ennis, though automated driveway gates may need to meet setback and safety-sensor requirements. We’ll tell you during the estimate if anything needs city approval. The written price covers what we’ll do, no surprises.
Yes. Tell us when quiet matters and we’ll pick a time that works. Our technicians wear shoe covers, lay drop cloths, and choose pet-safe lubricants where there’s a choice. We treat your home like our own.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ennis Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick