Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Katy, TX
Latch & Post Gate Repair is a Katy gate company focused on the three things homeowners actually call about: a gate that won’t close, a gate that needs to be built, and an electric opener that stopped listening. Katy is different from the rest of the Houston metro because of the clay. The black gumbo soil under Cinco Ranch, Elyson, and Firethorne swells when it rains and shrinks when it dries, and that movement slowly pushes gate posts out of plumb. We see the results every week. If your gate is sagging, dragging, or binding, call us at (626) 649-4572 for a written estimate before any work starts.
Why Katy Homes Are Different
Katy’s dominant housing stock is 1990s to 2010s master-planned subdivision homes, and a large share of them carry HOA-mandated ornamental iron or steel driveway gates. That’s not true everywhere. In Cinco Ranch, Cross Creek Ranch, Elyson, and Firethorne, the architectural guidelines dictate finish, color, and hardware style, so a repair that doesn’t match the approved spec can get flagged by the board. Our technicians carry a range of black and oil-rubbed hardware so the replacement part blends instead of standing out.
Then there’s the soil. The Katy Prairie’s expansive black clay heaves dramatically with Gulf rain events and contracts just as hard through summer drought. Gate posts that looked straight in April can be leaning by August. For automated slide and swing gates, that shift binds the track, throws the limit settings off, and eventually trips the safety sensors. The fix isn’t always a new motor. Often it’s re-plumming the post and resetting the operator, which is cheaper and lasts longer. Older ranch-style homes near historic downtown Katy, by contrast, tend toward simpler wood or chain-link gates that need basic hinge and latch work rather than operator adjustment.
Our Main Katy Services
Most Katy calls fall into three buckets. Each has its own page with specific pricing and details.
Gate Repair in Katy
Gate repair in Katy usually starts with a sagging leaf, a latch that won’t catch, or a hinge that has rusted through after years of humid air. On ornamental iron gates, we re-align the frame, replace worn hardware, and match the finish to the HOA’s approved palette. On wood and chain-link gates near old Katy, the work is simpler but just as necessary. One local condition matters here: a post that has drifted in expansive clay will keep throwing off even a perfectly hung gate until the post itself is fixed. That’s the difference between a repair that lasts and one that has to be redone in six months. Read the full breakdown on our Gate Repair in Katy page.
Gate Installation in Katy
A new gate in Katy means three decisions: material, style, and HOA compliance. Most master-planned communities require ornamental iron or steel with specific finishes, so we quote to the neighborhood’s written standard. Before any installation, we check the soil condition at the post locations because Katy’s clay expands enough to shift a poorly set post within a season. We deepen and reinforce the footing where the soil profile calls for it, then hang the gate so it swings true on day one and stays true through a wet spring. See the Gate Installation in Katy page for material options and pricing.
Electric Gate Repair in Katy
Electric gate repair in Katy is dominated by operators that have gone out of alignment rather than motors that have failed outright. The clay heave under a driveway column shifts the arm or track, and the motor works harder until a limit switch trips or a gear strips. We service FAAC, BFT, Linear, and Viking operators on site, and we re-align the post before we adjust the motor. That sequence matters. Replacing a control board on a leaning post just means replacing it again later. The full scope is on our Electric Gate Repair in Katy page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Katy
We’re factory-trained on the brands Katy homeowners actually have: FAAC, BFT, Linear, and Viking, among others. We stock common replacement arms, boards, and remotes in the Houston metro so most operator repairs don’t wait on a shipped part. If your opener is one of these, the fix usually happens on the first visit. See our brands for the full list.
Pricing for Gate Company in Katy, TX
| Service | Typical range in Katy |
|---|---|
| Gate latch replacement | $95 - $185 |
| Hinge replacement (pair) | $140 - $260 |
| Post re-alignment (single post) | $180 - $340 |
| Track or slide roller replacement | $120 - $250 |
| Ornamental iron section repair | $150 - $400 |
| Wood gate rebuild (per 6 ft) | $200 - $420 |
| Swing gate opener replacement | $850 - $1,900 |
| Operator arm or gear rebuild | $220 - $480 |
| Sensor or photo-eye replacement | $110 - $230 |
| Standard ornamental iron driveway gate install | $2,400 - $6,500 |
What pushes a Katy job toward the top of a range is usually HOA finish matching and clay-related post work. A post that looks repairable often needs a deeper footing once we dig and see the soil condition. Every quote is written and delivered before we start, so the number you approve is the number on the invoice. No surprises after the fact.
Neighborhoods We Serve in Katy
We work across Katy every week, from the big master-planned communities on the west side to the older streets near downtown. Most of our calls are answered within one business day, and live scheduling is available around the clock.
- Cinco Ranch
- Cross Creek Ranch
- Elyson
- Firethorne
- Old Katy
Service Area – Cities Near Katy
We serve Katy and the surrounding communities, including Fulshear, TX, Richmond, TX, Sugar Land, TX, and Stafford, TX. If you’re on the edge of Katy and aren’t sure which service area applies, call and we’ll confirm while you’re on the line.
Serving Katy, TX - Our Local Coverage Area
We’re based in the Katy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Katy
Most Katy calls are scheduled within one business day. Repairs where the gate won’t open at all are treated as emergencies, and a live person answers the phone 24/7 to book them. Call (626) 649-4572 and you’ll speak to a person, not a callback queue.
For repairs that match the existing finish and hardware, HOA approval is usually not required. For a full replacement, your community’s architectural guidelines may require a pre-approval. We can quote to the written spec so your submittal matches what’s actually installed.
Yes. We work across Cinco Ranch, Cross Creek Ranch, Elyson, Firethorne, Old Katy, and the surrounding areas. If you’re near the Fulshear or Richmond line, call and we’ll confirm your location is in our service area before you book anything.
Contact Latch & Post Gate Repair in Katy
Ready for a straight answer and a written price? Call us at (626) 649-4572 for a free estimate. We’ll knock, check the gate, and tell you what it costs before anything starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Katy Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco