Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across West Palm Beach
Gate repair in West Palm Beach usually means one of two things. Either a swing gate has sagged on corroded hinges, or a slide gate operator has quit after a storm surge or a salt-driven short. Latch & Post Gate Repair handles both, and we’re on call for neighborhoods from El Cid to the HOA communities off Jog Road. A live person answers at (626) 649-4572 any hour, and the written price comes before any tool leaves the truck.
We’re a Cedarwell-family gate specialist, not a general handyman. That means we work on gates all day, every day, in West Palm Beach, and we know what the Intracoastal air does to hardware here. Most calls we run are familiar: a Viking board that shorted after a storm, a DoorKing arm that binds, a wrought-iron panel pulling away from an old masonry pillar. You’ll get a straight answer on what failed, what it costs, and what will actually hold up on the coast.
Why Latch & Post Gate Repair Is West Palm Beach’s Preferred Gate Repair Company
West Palm Beach homeowners keep calling us back for a simple reason: we treat the house the way we’d want ours treated. Every tech arrives in uniform, puts on shoe covers before stepping inside, and lays drop cloths down before any drilling or grinding starts. We take a photo of the clean-up before we leave. It’s a small routine, but it’s the part families remember, especially when kids and pets are in the house.
Our Gate Repair team works under the Cedarwell C.A.R.E. values, which our owner Cody Beckman set down as the standard years ago. Clean up like it’s our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. Cody’s rule is that no tech leaves a job until those four things happened, no exceptions.
Because we focus only on gates, we also stock the parts West Palm Beach actually needs. Stainless hinges for salt-air exposure, sealed control boards, new rack and pinion sets for slide gates. That means less waiting on a distributor in Tampa and more first-visit repairs. And every job we complete is covered by the 365-Day Done Right Promise. If it isn’t right, we make it right. No fine print.
Scheduling and dispatch for our West Palm Beach work is coordinated from our South FL office in Miami, with crews serving West Palm Beach locally. Response time to most neighborhoods, including Flamingo Park and the communities along Southern Boulevard, runs within a day for scheduled repairs. And emergency calls are answered around the clock by a live person, never a voicemail tree.
Iron Gate Repair in West Palm Beach
Iron Gate Repair in West Palm Beach is one of the most common jobs on our board, and it’s almost always about corrosion. In Flamingo Park and El Cid, those painted wrought-iron estate gates from the 1920s through 1950s sit on masonry pillars that have spent decades absorbing salt-laden air from the Intracoastal. The panel looks fine until you check the hinge post and find the steel inside has turned to rust scale. Fixing the panel without addressing the post is a repeat failure waiting to happen.
We see the same pattern in HOA communities off Okeechobee Boulevard and Forest Hill Boulevard. Swing gates with steel hinges seize or sag, usually within three to five years of install. The cost for most iron gate hinge and post repairs in West Palm Beach runs between $180 and $450, depending on how much of the post needs rebuilding and whether we’re welding new stainless brackets or replacing the entire hinge set. You’ll see the exact number in writing before we touch anything.
Post and Hinge Patching
When a gate sags, the first thing we check is the post footing. In older West Palm Beach neighborhoods, brick and stucco pillars crack at the base from decades of water and salt. We’ll tell you honestly if the post can be patched or if it needs a rebuild. Most hinge replacements on this style of gate run $220 to $380, including grinding off the old corroded hardware and setting stainless replacements.
Welding and Rust Repair
On painted iron panels, rust blisters form at weld points and hidden seams before they show on the flat surface. We cut out the corroded section, weld in new steel, then treat the joint so it doesn’t become the next failure. Typical weld and rust repair on a West Palm Beach iron gate runs $150 to $400 depending on the repair size. The goal is a fix that survives five coastal summers, not one.
Sliding Gate Repair in West Palm Beach
Sliding Gate Repair in West Palm Beach is a different animal from swing gate work, and the failure pattern here is tied directly to Palm Beach County’s HOA density. The master-planned communities that stretch west past Jog Road and up toward North Palm Beach run almost entirely on slide gate operators, and those operators take a beating from salt, heat, and storm surge. The rack and pinion grinds, the motor strains, and eventually the board gives up.
We were called to a gated community off Jog Road where a LiftMaster slide gate operator had quit after a summer storm surge. The control board was fried and the rack and pinion was grinding against a corroded hinge post. Our tech replaced the board, swapped the galvanized track for stainless hardware, and reset the safety photocell. Three weeks later we were back on the same street for a Viking operator on a swing gate that had shorted from the same moisture intrusion. That’s a normal month in West Palm Beach.
Costs for sliding gate repair here typically fall between $240 and $520, depending on whether it’s a board replacement, track alignment, or a full rack replacement. If the motor itself is dead, that’s usually $480 to $750 for a LiftMaster or Viking replacement installed. Every quote is written and agreed before we order a single part.
Track and Roller Service
Most slow or grinding slide gates in West Palm Beach aren’t dead operators. They’re tracks that have corroded or shifted in the humidity and salt air. We clean, realign, or replace the track and rollers, and we use stainless hardware on the coast because galvanized steel doesn’t last here. A standard track service runs $180 to $320.
Operator Board Replacement
After a tropical system tracks near Palm Beach County, the first wave of calls comes from communities where slide gate operator boards shorted from surge or moisture. Replacing a LiftMaster, Viking, or DoorKing control board usually runs $260 to $480, including programming and safety sensor testing. We carry common boards in the truck to get gates moving the same day.
Trusted Brands We Service in West Palm Beach
We’re factory-trained on the brands families and HOAs in West Palm Beach actually run, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most of our local slide gate work is on Viking, LiftMaster, and DoorKing units, while Ghost Controls and Mighty Mule show up often on single-family driveway gates in neighborhoods like Greenacres and Palm Beach Gardens. Because we focus only on gates, we keep the common boards, remotes, and safety parts in local stock, which means faster turnaround when your gate is stuck.
Common Gate Repair Problems We See in West Palm Beach Homes
- Galvanic corrosion on steel hinges and weld points, especially near the Intracoastal. The salt air from both the waterway and the ocean attacks steel within three to five years. Gates start to sag and bind, and painted panels rust from the hinge post outward.
- Storm-related board failures after hurricane season. Power surges and water intrusion fry operator control boards on LiftMaster, Viking, and DoorKing units, leaving whole communities locked open or shut for days until a board swap.
- Slide gate track grinding from corrosion and shifting soil. The humidity and salt breaks down galvanized track quickly here, which is why we always recommend stainless replacements on coastal properties.
- Wrought-iron panel rot at the post footing in historic neighborhoods. In Flamingo Park and El Cid, painted iron looks presentable but has corroded internally where it connects to old masonry. That’s a job for someone who welds and understands old construction.
Pricing for Gate Repair in West Palm Beach, FL
Gate repair in West Palm Beach has real ranges, and we’d rather tell you them straight. Hinge and post repairs typically run $180 to $450. Weld and rust repair on iron gates: $150 to $400. Sliding gate track service: $180 to $320. Control board replacement: $260 to $480. Full slide gate operator swap: $480 to $750. Those are the numbers we quote most weeks across West Palm Beach. What shifts the price is the amount of corrosion damage, whether the post needs rebuilding, and whether you need stainless hardware rather than galvanized. Every quote is written before the work begins, and you’re never under pressure to accept it on the spot. The estimate is free.
We Also Serve Cities Near West Palm Beach
Our service area covers West Palm Beach and the surrounding communities, including Palm Beach, Greenacres, North Palm Beach, and Palm Beach Gardens. If you’re in one of those cities with a gate that won’t close or an operator that’s grinding, the same Cedarwell C.A.R.E. routine applies. Call and we’ll schedule around your time, not ours.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Palm Beach
West Palm Beach sits between the Intracoastal and the Atlantic, which means salt-laden air from both sides attacks gate hardware year-round. Galvanic corrosion eats steel hinges, welds, and motor housings in roughly three to five years here, while identical gates in inland cities like Orlando often last twice as long. Add hurricane-season power surges and moisture intrusion, and operator boards fail on a predictable cycle. That’s why we recommend sealed boards and stainless hardware for any coastal install. Call (626) 649-4572 for a written quote.
In West Palm Beach it’s more often the track than the operator. Salt and humidity corrode galvanized track and rollers quickly, which makes the gate bind and strains the motor. We’ll inspect both, but we start by checking the track alignment and roller condition before testing the board. If the track is too far gone, we replace it with stainless so the same failure doesn’t return. Estimates are free, and the price is in your hands before any work starts.
Check the breaker and any exterior GFCI outlet first. If those are live, the most likely culprit is a fried control board from surge or water intrusion, which is the most common post-storm failure we see in West Palm Beach. On LiftMaster, Viking, and DoorKing operators, board replacement is a same-visit fix in most cases. Call us and we’ll walk through those first checks on the phone before scheduling a tech.
Yes. We regularly work on 1920s through 1950s estate gates in El Cid and Flamingo Park, where painted iron panels are mounted on brick or stucco pillars. Those gates usually fail at the hinge post footing, and fixing the panel without rebuilding the post just means another call next year. We’ll tell you what the post actually needs, and our quote covers the full repair, not just the visible damage.
Stainless steel hinges, brackets, and fasteners, plus sealed or marine-rated control boards. Galvanized steel, which works inland, corrodes in three to five years on West Palm Beach’s coastal exposure. We also recommend powder-coated or properly primed and painted steel panels rather than bare iron. Those upgraded specs cost a little more up front, but they avoid the repeat failure cycle we see all the time near the Intracoastal. Call (626) 649-4572 for exact numbers.
Contact Latch & Post Gate Repair in West Palm Beach
If your gate is sagging, grinding, or dead after a storm, call us at (626) 649-4572 for a free estimate. A live person answers 24/7, and we’ll give you a straight answer on what’s wrong and what it costs to fix. When our tech arrives at your West Palm Beach home, you’ll get shoe covers on the floors, drop cloths under the work area, and a cleanup photo before we leave. No surprises, no pressure, and every repair is backed by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving West Palm Beach with the Cedarwell C.A.R.E. standard.