Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tomball
A driveway gate in Tomball that grinds, sags, or won’t close usually comes down to one of three things: a hinge post that clay soil has pushed out of plumb, a weld that finally let go after 15 years of humidity, or an operator arm fighting a frame it can no longer move. Our Gate Repair team handles all three, and we answer the phone live at (626) 649-4572 any hour you call. We know the acreage properties off FM 2920 and Hufsmith-Kohrville Road, the HOAs at Amira and Boudreaux Ranch, and the older ranchettes where a 2006 LiftMaster operator has been quietly wearing itself out for years. This page is written for Tomball homeowners who want a straight answer about what is wrong, what it costs, and when someone can show up.
Why Latch & Post Gate Repair Is Tomball’s Preferred Gate Repair Company
Latch & Post Gate Repair has been part of the Cedarwell family of independently owned gate specialists since 2009. We focus on one trade: gates. Not fences, not general contracting, not a little bit of everything. A gate really comes down to two parts, the latch that holds it and the post that carries it, and that is the job we focus on. Cody Beckman, who leads the business, insists on a written price before any work begins, shoe covers and drop cloths on every visit, and a photo of the clean-up before our technician leaves. Tomball homeowners tell us they notice the difference, because most gate companies never mention drop cloths at all.
Our technicians are background-checked and uniformed, and they work to the Cedarwell C.A.R.E. values: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. Dispatch for Tomball is coordinated from the brand’s Houston office, with crews serving Tomball locally. Every repair and installation is covered by the 365-Day Done Right Promise: if it is not done right, we make it right. No argument, no fine print.
Driveway Gate Repair in Tomball
Driveway Gate Repair in Tomball almost always starts with the post, not the operator. The black-clay gumbo soil across the Katy Prairie swells after wet winters and contracts during dry summers, lifting and tipping concrete footings year after year. A post that has moved two or three degrees out of plumb racks the gate frame, binds the actuator arm, and makes a new operator fail the same way the old one did. That is why we re-plumb the post before we touch any gearing.
Operator Arm Realignment
When a swing gate on a Tomball ranchette has been fighting a tipped post, the operator arm takes the strain. Our techs realign the arm to the corrected post position, reset the open and close limits, and test the cycle without load before putting the gate back into service. Most standard operator realignments on Tomball acreage properties run $220 to $410, and the written price is in your hand before we start.
Hinge and Post Repair
Wet winters rot wooden ranch gate posts, and the same moisture accelerates rust at steel hinge plates. On a 3-acre ranchette off Hufsmith-Kohrville Road, our tech found a 2006-era LiftMaster swing gate that had tipped 3 degrees because the clay-heavy concrete footing had heaved over a decade of wet winters. The actuator gears were grinding and a weld at the hinge plate had snapped. We re-plumbed the hinge post, re-welded the plate, then realigned the operator arm with new limit settings. The safety photocell was replaced after the old one tested intermittent. That job did not need a new operator, and a technician who skipped the footing would have sold one.
Gate Welding in Tomball
Gate Welding in Tomball is not cosmetic. Ornamental iron and tubular steel driveway gates in this part of the northwest Houston corridor sit in 50 inches of annual rain and near-constant humidity. Hinge plates rust thin, welds snap, and a gate that falls can hurt someone. We weld on-site with mobile equipment, and we grind the joint clean before laying a bead.
Rust Perforation Repair
Humidity on the Katy Prairie does not just surface-rust a gate; it perforates the steel at the hinge plate and the lower rail, especially where sprinklers overspray the drive. If the metal is thin but structurally sound, we cut out the bad section and weld in new plate. If the perforation has reached the hinge pin itself, the post needs replacement and the gate realigned. A standard weld repair on a Tomball ornamental iron gate runs $180 to $360, and a full hinge plate replacement starts around $450.
Snapped Weld and Racking Frame Repair
Tomball’s 2000s-era acreage gates are now 15 to 20 years old, and many of the welds made when the homes were built were never meant to outlast two decades of soil movement and humidity. The frame racks, the weld at the hinge plate tears, and the gate droops so it drags at the latch side. We re-plumb the post, clamp and squared the frame, and re-weld the joint. The repair is only as good as the footing under it, so we check both before we quote.
Trusted Brands We Service in Tomball
Our technicians are factory-trained on the brands Tomball families actually have on their drives: FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for these operators locally, so a straightforward board or gear replacement does not wait a week on a freight truck. Whether your acreage gate runs a Viking swing arm or a Linear slide operator, the technician who arrives knows the brand, the model, and the failure points.
Common Gate Repair Problems We See in Tomball Homes
- Clay-heaved hinge posts: Tomball’s expansive gumbo soil swells and shrinks several inches between wet winters and dry summers. A post that has tipped 2 to 4 degrees racks the gate and grinds the actuator gears, so the footing has to be re-plumbed before any operator work makes sense.
- Rusted weld joints on older iron gates: High humidity and 50 inches of annual rainfall accelerate rust at hinge plates and weld joints on ornamental iron and tubular steel gates. Many of these welds date to the mid-2000s acreage boom and are simply at the end of their life.
- Slide gates jamming on shared drives: On tight shared-driveway lots off FM 2920, a slide gate is often the only option where a swing gate won’t fit. The rack and pinion runs in a narrow channel, and seasonal soil movement or leaf debris causes the gate to jam mid-travel.
- Intermittent safety photo-eyes: Tomball’s wet, humid air corrodes photo-eye terminals and lets moisture into the housing. A sensor that tests fine sometimes and fails others is a sign the contacts are oxidizing, and it should be replaced before the gate closes on a car, a pet, or a child.
Pricing for Gate Repair in Tomball, TX
Here is what a Tomball homeowner can expect, line by line. A typical hinge and post repair on a standard residential gate runs $180 to $340. Operator arm realignment runs $220 to $410. On-site weld repair runs $180 to $360, and a full hinge plate replacement starts around $450. A complete operator replacement, depending on the brand and whether it is a swing or slide unit, typically falls between $800 and $1,800 installed. The two things that move the price are the condition of the concrete footing and whether the frame has racked beyond a simple realignment. Every quote is written and delivered before any work begins. Call (626) 649-4572 for a free estimate, and the number on the paper is the number you pay.
We Also Serve Cities Near Tomball
Latch & Post Gate Repair serves Tomball and the surrounding communities, including Pinehurst, Spring, Katy, and Conroe. If you live in one of these nearby areas and need a gate specialist who shows up with a written price and drop cloths, call us at the same number above.
Serving Tomball, TX - Our Local Coverage Area
We’re based in the Tomball area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tomball
Not usually. A grinding noise from a Tomball swing gate is most often the actuator gears working against a frame that a clay-heaved post has pushed out of plumb. We re-plumb the post, realign the arm, and reset the limits first, then test the operator under load. Only if the gears themselves are stripped or the board has failed do we recommend replacement. Call (626) 649-4572 and we can diagnose it on-site.
Yes, that is exactly the situation slide gates are made for. On Tomball’s shared-driveway lots off FM 2920, a slide gate gives you a full driveway opening without swinging into a neighbor’s right of way or the street. We measure the set-back, specify a rack-and-pinion or chain-drive slide system that fits the available side clearance, and run the operator on a pad that sits above grade so seasonal soil movement does not jam it.
Look at the post itself. If the gate sags at the latch side but the post still stands straight, a hinge adjustment or bushing replacement may be enough. If the post leans 2 degrees or more, or if you can see a widening crack in the concrete collar at the base of the post, the footing has heaved and the post needs to be re-plumbed. On Tomball’s clay gumbo, a post that is leaning now will lean more after the next wet winter.
Yes. Texas follows the UL 325 standard for automatic gate operators, which requires a primary entrapment protection device such as photo-eyes, plus a secondary device such as an edge sensor on the gate itself. On a Tomball acreage gate, we test both devices under load, replace anything that reads intermittent, and set the obstruction sensitivity so the gate reverses on contact. This matters if you have kids, pets, or delivery drivers pulling up to the drive.
We can. Our welding trailer carries the grinder, clamps, and MIG or stick equipment for the job, and the tech grinds the joint clean, squares the frame, and welds it in place. For hinge-plate welds on ornamental iron, we also coat the repair to slow the rust cycle that Tomball’s humidity accelerates. Most on-site weld repairs are done the same day. Call (626) 649-4572 for an exact quote, and the estimate is free.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Tomball since the company was founded in 2009.