Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Temple City
Most gate repairs in Temple City come down to one of three things: a hinge or post that has shifted, an operator that is fighting a heavy gate, or rust that has eaten through a weld. Latch & Post Gate Repair has been handling all three since 2009 as part of the Cedarwell family of independently owned gate specialists. We carry parts for the brands Temple City homeowners actually own, and our technicians know exactly how the city’s 2000s-era ornamental gates were built. If your gate is scraping the driveway, sagging off its post, or refusing to open, call (626) 649-4572 for a written quote before any work starts.
Why Latch & Post Gate Repair Is Temple City’s Preferred Gate Repair Company
There are plenty of companies that say they fix gates. The difference here is that we know why Temple City gates fail the way they do. Cody Beckman, our lead, has spent years understanding how the small local iron shops of the 2000s built driveway gates on this city’s compact ranch lots. That knowledge changes how we quote work: we build fabrication time into a written price rather than discovering mid-job that a hinge pin is non-standard and nothing off the shelf will fit.
Every call is answered by a live person. Day, night, weekend, holiday – no voicemail queue. When one of our background-checked, uniformed technicians arrives at your Temple City home, they follow the Cedarwell C.A.R.E. values to the letter: shoe covers and drop cloths inside the house, a cleanup photo before leaving, and quiet tools when kids are asleep. We also honor the 365-Day Done Right Promise. If our repair is not right, we make it right.
Wrought Iron Gate Repair in Temple City
Wrought Iron Gate Repair in Temple City almost always means working on ornamental driveway gates that were installed in the 2000s and 2010s by small local fabricators. These gates are beautiful, but they were often built with non-standard hinge and post dimensions, powder-coat finishes without true galvanization, and footings that were never sized for the weight of a 12-foot iron leaf. When they fail, they fail as a system: the post leans, the weld cracks, the operator strains, and the panel drags on the apron.
A typical wrought iron repair on a Temple City dual-swing gate – sag correction, hinge replacement, and operator re-clamping – runs $450 to $1,400 depending on how much custom fabrication is needed. You will see that number in writing before we start, because we fabricate our own hinges in-house and know what local retrofits actually require.
What a repair actually involves here
We cut out rusted welds, grind the affected areas clean, and re-weld with proper penetration. Where the original hinge posts have shifted, we inspect the footings rather than just patching the gate panel. A new weld on a leaning post will fail within a year, so the post has to be plumbed first.
Rust and finish on ornamental iron
The San Gabriel Valley traps heat, and summer days above 100°F blister powder-coat finishes fast. We strip failed coating at repair points, apply a rust-inhibiting primer, and paint to match the existing gate as closely as the finish allows. The repaired section gets the same protection as the rest of the panel.
Metal Gate Repair in Temple City
Metal Gate Repair in Temple City covers the full range of what hangs at the end of a driveway: ornamental iron, steel tube gates, aluminum sliders, and the occasional steel frame with wood infill. The dominant pattern here is a gate that was retrofitted onto a 1940s to 1960s ranch home with a 10 to 12 foot driveway that was never designed for a heavy sliding or swinging panel. That clearance problem causes chronic hinge stress and ground-scraping, and it shortens the life of the operator.
Basic metal gate repair – hinge shimming, latch realignment, panel straightening, and lubrication – typically costs $195 to $525 in Temple City. Replacing a bent steel frame section or fabricating a new post-to-gate hinge mount runs higher, usually $600 to $1,200. We quote the exact number before any work begins and we do not begin until you have seen it in writing.
When the post is the problem
Many Temple City metal gates were installed on footings that are simply undersized for the weight they carry. The post leans, the gate sags off plumb, and suddenly the operator is fighting the whole assembly. We re-pour hinge-post footings where corrosion or shallow concrete is present, then re-set the gate true.
Operator to gate alignment
When a metal gate sags, the operator arm gets clamped on at an angle, and that angle is what kills the motor. We correct the gate plane first, then re-clamp the operator arm straight and level. Without that sequence, a new operator will burn out the same way the old one did.
Trusted Brands We Service in Temple City
We are factory-trained on the gate equipment most Temple City homes use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Temple City specifically, we see a high concentration of Viking and Ghost Controls openers on the 2000s ornamental retrofits, plus DoorKing on some of the beefier slide-gate installations. We keep replacement boards, remotes, safety photocells, and limit-switch assemblies stocked for these systems so we are not waiting on parts while your driveway sits blocked.
Common Gate Repair Problems We See in Temple City Homes
- Sagging dual-swing gates on 10-12 foot driveways. The original hinge posts went in on shallow, undersized footings, and the weight of a 2000s ornamental leaf eventually pulls them out of plumb. The gate drags, the motor stalls, and the fix has to start with the post.
- Rust blooming at welds and hinge pins. Powder-coat-only iron has no galvanized underlayer, and San Gabriel Valley heat plus Santa Ana winds find every thin spot fast. Once moisture gets in at a weld or a pin hole, the rust spreads behind the coating.
- Non-standard hinge and post dimensions. Gates built by small local shops in the 2000s often used one-off pin spacings and post sizes. Off-the-shelf replacement hinges will not bolt up, which means the repair needs shop-fabricated hardware.
- Operator overload and burned motors. When a sagging gate fights the opener, the motor pulls more amperage than it is rated for and the limit switches misread. Replacing the operator without fixing the gate plane just sets up the next failure.
Pricing for Gate Repair in Temple City, CA
Gate repair prices in Temple City are shaped by how the gate was originally built, and much of what we see was not standardized. A simple latch or lock replacement runs $125 to $275. Hinge shimming and post re-setting typically lands between $400 and $900. Full sag correction with custom fabrication on a heavy ornamental dual-swing gate runs $900 to $1,600. Rust repair and re-welding a cracked panel usually costs $250 to $700 depending on how far the corrosion has traveled. The price you are quoted is the price you pay: written down, agreed to, and reviewed before we touch anything. Call (626) 649-4572 for a free estimate on Gate Repair in Temple City.
We Also Serve Cities Near Temple City
Beyond Temple City, our repair routes cover Temple City‘s neighbors: El Monte, San Gabriel, Arcadia, and Rosemead. The same written-price policy and 365-Day Done Right Promise apply everywhere we work, and our local parts stock follows the equipment common across this stretch of the San Gabriel Valley. If you live just over the city line, our Gate Repair team is still your shop.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple City
Temple City’s ornamental driveway gates were largely retrofitted onto 1940s to 1960s ranch homes during the 2000s, and many of those retrofits used shallow hinge-post footings that were never sized for a 12-foot iron leaf. Between 10 and 20 years after installation, the footings settle, the posts lean, and the entire gate system – hinges, welds, operator – goes out of true. The repair is rarely just the gate panel; it is usually the post, the panel, and the operator alignment together. A full sag correction here runs $900 to $1,600. Call (626) 649-4572 and we will give you an exact written number.
No, but the 2000s ornamental gates in this city were often built by small local shops with non-standard hinge pins and post dimensions. When a hinge or hinge mount fails, an off-the-shelf replacement typically will not bolt up. If the original hardware is non-standard, we fabricate the matched part in our shop rather than forcing a fix. The fabrication time is included in the written quote, not discovered as a surprise after the gate is apart. Call (626) 649-4572 for an estimate.
We strip the failed powder coat near each repair point, grind out the rusted steel, treat the surface with a rust-inhibiting primer, and re-paint to match. Because the San Gabriel Valley sees summer highs above 100°F and fall Santa Ana winds, exposed steel degrades quickly, so we never weld over weakened metal. The repaired section is refinished to hold up under the same heat and wind that caused the original failure. For a quote, call (626) 649-4572.
The hinge post first, always, in Temple City. A sagging ornamental panel is the symptom. The cause is usually a hinge post that has moved on an undersized footing, and any panel repair done while the post leans will fail again as soon as the weight settles. We correct the post, re-hang the gate square, then re-clamp the operator arm to the corrected plane. It is the only sequence that keeps the repair from returning in a year. Call (626) 649-4572 to have it looked at.
Yes. Every automatic gate in Temple City must operate with entrapment protection in working order: safety edges, photocells, and a properly set clutch or current-sensing reverse. This is a safety issue, not a paperwork issue. A gate that reverses incorrectly or misses a photocell fault can close on a child, a pet, or a vehicle, and the injury potential is serious. Our technicians test every safety device on every automatic repair, and we will not sign off on an opener that lacks them. Call (626) 649-4572 and we will walk you through it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Temple City since 2009.