Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Stevenson Ranch
Gate repair in Stevenson Ranch usually means one of three things: a swing gate that has sagged off its hinges, an automatic opener that stopped responding, or a steel post that cracked at the footing. Most jobs run between $180 and $900 depending on the part, and we quote a written price before any work starts. Our techs know the Stevenson Ranch tract-home stock well, from the Southern Oaks lots off Stevenson Ranch Parkway to the hillside homes above Pico Canyon. Call (626) 649-4572 and a live person answers, any hour.
Why Latch & Post Gate Repair Is Stevenson Ranch’s Preferred Gate Repair Company
Stevenson Ranch was built out almost entirely between 1990 and 2005, which means a large share of the driveway gates and HOA entry systems here are hitting the 20 to 30 year mark at the same time. Operators fail, control boards burn out, and powder-coated steel gates oxidize faster in this western hillside corridor than they do in coastal LA. We see the same builder-spec hardware across whole tracts, and we have learned which failures repeat. That local pattern recognition is why homeowners call us back for second and third jobs.
Our technicians are background-checked, uniformed, and factory-trained on the brands Stevenson Ranch families actually have: LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. Every visit includes shoe covers and drop cloths inside the home, a cleanup photo before we leave, and a written price before we touch anything. The 365-Day Done Right Promise covers every repair. If it is not right, we make it right. No fine print.
We answer the phone live, 24 hours a day, seven days a week. When your gate will not close at 10 p.m. and the dog is in the yard, you do not want a callback queue. You get a person who can schedule a tech for Stevenson Ranch the next morning, or same day when the schedule allows.
Metal Gate Repair in Stevenson Ranch
Metal Gate Repair in Stevenson Ranch typically involves wrought iron or powder-coated steel driveway gates, the standard builder upgrades in the 1990s and 2000s tracts. Most metal repairs here fall between $220 and $850: replacing a bent hinge leaf, welding a cracked picket, straightening a bowed top rail, or re-anchoring a post that has cracked at the concrete footing. The wind here is a real factor. Santa Ana events funnel through the Santa Clarita Valley and hit Stevenson Ranch’s western hillside hard enough to rip gate leafs off hinge barrels or bend a tubular steel frame.
Hinge and Post Work
Hinge replacement and post repair is the most common metal gate job we do in Stevenson Ranch. The summers run over 100°F, and the UV exposure accelerates powder-coat oxidation. Once the finish fails, moisture gets in and the hinge barrels wear faster. If a gate sags, the post takes the load and eventually cracks. We re-set posts in fresh concrete, re-align the leaf, and match the hinge hardware to what is already there.
Weld and Rust Repair
Rust repair on a Stevenson Ranch steel gate is almost never just cosmetic. A rusted hollow picket will hold water and split at the weld. We grind back the affected area, weld in a matching section, and refinish with a paint match so the HOA does not flag it. Most weld and rust repairs run $150 to $600 per section depending on how far the corrosion has traveled.
Wood Gate Repair in Stevenson Ranch
Wood Gate Repair in Stevenson Ranch shows up mostly on side-yard pedestrian gates and a smaller number of driveway gates where a builder went with cedar or redwood. The dry air and 100°F summers pull moisture out of the wood, and the gate will rack or split at the stiles. Typical wood gate repairs here run $180 to $500: replacing a cracked stile, re-hanging a gate that drags, or swapping a rotted post at the base. We use construction screws and galvanized hardware that holds up to the Santa Clarita Valley heat.
Realignment and Lock Repair
A wood gate that drags has usually racked because the diagonal brace failed or the hinges pulled loose. We square the frame, rebuild the brace if it is needed, and re-hang the gate so it swings true. Lock repair is often part of the same visit, because a racked gate will not latch. We replace the latch and strike, and we check the gap so it closes the way it did when the house was new.
Post Replacement
Wood posts in Stevenson Ranch rot at the soil line even though the summers are dry, because irrigation overspray keeps the base wet. We set a new pressure-treated post in concrete, reattach the gate, and leave the area cleaned up. You get a photo of the cleanup before our tech drives away.
Trusted Brands We Service in Stevenson Ranch
We are factory-trained on Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, and Elite. That matters in Stevenson Ranch because several HOA entry systems here still run early-2000s Viking or Elite slide-gate operators with discontinued loop-detector boards. We keep cross-reference parts for those legacy boards and can often repair an operator a general contractor would call obsolete. Most replacement parts for Stevenson Ranch jobs are sourced same or next day, and your written quote reflects the exact part before we order it.
Common Gate Repair Problems We See in Stevenson Ranch Homes
- Builder-grade operators on gates installed as manual. Many Stevenson Ranch homes got a manual gate during the build, and an operator was added later, often undersized for the gate’s weight. The board and arm fail prematurely, and the fix is usually a properly sized operator.
- No dedicated power run. Some original builders never pulled a 120-volt circuit to the gate. We have seen operators tapped into landscape lighting and pool circuits for 20 years. When that breaker trips or the wire corrodes, the gate is dead. We run a dedicated conduit and circuit when this is the problem.
- Powder-coat oxidation and cracked footings. A hundred-degree summer day bakes the finish, and once oxidation starts, the steel under it goes too. Cracked post footings are common, especially on hillside lots where drainage runs toward the post.
- Santa Ana wind damage. The wind events here can twist a gate leaf off its hinge post. If your gate came off during a windstorm, the hinge hardware is likely undersized for the leaf’s wind load. We replace the hinge assembly and reinforce the post with a heavier anchor.
Pricing for Gate Repair in Stevenson Ranch, CA
A standard hinge or latch replacement on a Stevenson Ranch driveway gate runs $180 to $340. Automatic opener board replacement typically runs $350 to $700 depending on the brand and whether we can cross-reference a legacy board. Weld and rust repair runs $150 to $600 per affected section. A full operator replacement with a new control board and safety photocells usually lands between $900 and $1,800. The written quote you get before work starts is the number you pay. Free estimates are standard, and there is no pressure to accept on the spot.
We Also Serve Cities Near Stevenson Ranch
Our Gate Repair team serves Stevenson Ranch and the surrounding areas, including Santa Clarita, Castaic, San Fernando, and Simi Valley. If you are in a neighboring community, we are familiar with the local HOA and permitting rules there too. Learn more about our service area on the Stevenson Ranch page.
Serving Stevenson Ranch, CA - Our Local Coverage Area
We’re based in the Stevenson Ranch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Stevenson Ranch
LA County issues gate permits for Stevenson Ranch because the community is unincorporated and falls under LA County Department of Public Works jurisdiction, not the City of Santa Clarita. This is a common point of confusion for contractors who work mainly in Santa Clarita and assume the city rules apply. We know which forms Stevenson Ranch jobs need and we handle the paperwork for most repairs and replacements. Call (626) 649-4572 if you want us to check what your specific gate project requires.
Yes, in most cases those early-2000s Viking and Elite slide-gate operators can still be repaired, because we keep cross-reference parts for the discontinued loop-detector boards that were builder-spec across Stevenson Ranch HOA tracts. If the board is truly dead and no cross-reference exists, we will tell you straight and quote a drop-in replacement that works with your existing loops and safety edges. Call us with the operator model number and we will give you a written price.
If the repair restores the gate to its original appearance and hardware, HOA approval is usually not required. If you are changing the gate style, color, or material, the HOA will want to approve it first, and LA County may require a permit depending on the scope. We can help you figure out which layer applies to your job before you spend anything.
Most wind-damaged gates here came off because the original hinge hardware was undersized for the wind load on the leaf. A strong Santa Ana gust hitting a six-foot steel gate can generate enough force to shear a standard hinge barrel. We replace the hinge assembly with heavier hardware and anchor the post more deeply, which holds up better to future wind events.
Yes, automatic gate operators in Stevenson Ranch must have photo-eyes or an equivalent safety reversal system that meets current UL 325 requirements. If your gate does not stop and reverse when something is in the path, that is a safety issue, not just a wear item. We check the photo-eyes on every automatic gate call and quote the cost to bring the system up to standard if it is missing.
Contact Latch & Post Gate Repair for Gate Repair in Stevenson Ranch
If your gate is sagging, dragging, stuck, or dead, call (626) 649-4572 for a free estimate. A live person answers, any hour. We will schedule a technician for Stevenson Ranch, give you a written price before any work begins, and leave your driveway cleaner than we found it. The 365-Day Done Right Promise covers the whole job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Stevenson Ranch since the company’s founding in 2009.





Before
After
Before
After
Before
After