Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Selma
A sagging gate or a dead opener in Selma usually needs attention within a day or two, not a week. Most gate repairs here run between $180 and $480 depending on whether it’s a hinge, a post, an operator board, or a full panel; we’ll write the exact number down before any work starts. We know Selma’s mix of 1970s tract homes, ranch-style lots, and vineyard parcels off Floral Avenue and Mountain View, and our crews arrive in uniform with the parts and anchoring gear those properties actually need. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Selma’s Preferred Gate Repair Company
Selma is the only city in Fresno County’s raisin belt where a residential gate repair call and a vineyard slide gate call can come from the same block. That means our techs routinely carry both ornamental hinge hardware and heavy tube-steel farm-gate anchoring gear on the same truck. Most gate companies pick one or the other; we stock both because Selma’s property lines literally demand both.
Founded in 2009, Latch & Post is part of the Cedarwell family of independently owned and operated gate specialists. Cody Beckman leads our team, and the 365-Day Done Right Promise sits behind every repair and installation. If something isn’t right, we make it right. No argument, no fine print.
Our technicians are background-checked and factory-trained on the brands Selma homeowners and farmers actually use: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When they arrive, they wear shoe covers inside your home, lay drop cloths where the work happens, and take a photo of the cleanup before they leave. Quiet tools when kids are napping, pet-safe lubricants where there’s a choice, and a written price before any work begins. That’s the Cedarwell C.A.R.E. routine, and it’s included on every job.
Wood Gate Repair in Selma
Wood Gate Repair in Selma nearly always comes down to moisture and heat cycling: the tule fog season swells the boards, and the 105°F summer afternoons shrink them back until the hinges loosen and the panel binds against the post. We see this on the older ranch-style homes along Selma’s numbered streets, where the original redwood or cedar gates were built decades ago and have been adjusting to the San Joaquin Valley climate ever since. A typical wood gate repair in Selma runs $160 to $360: reframing a sagging panel, replacing rotted stiles, swapping corroded hinge hardware, and re-hanging the gate so the latch actually meets the post. If the wood itself is too far gone, a full replacement panel with galvanised hardware and stainless fixings runs $480 to $900, and we’ll show you the written price before we touch anything.
Hinge and Post Replacement
On Selma’s older lots, the hinge post fails before the gate itself does. Block-wall perimeters from the 1960s and 70s often have steel posts set directly into soil that shifts with irrigation and winter dampness. We pull the rotted post, pour a new concrete footing, and re-hang the panel with galvanised or stainless hardware that actually survives tule fog.
Panel Straightening and Realignment
When a wood gate drags on the ground or won’t latch, it’s rarely one problem. It’s usually a combination: swollen boards, a hinge post that’s out of plumb, and a latch that’s been adjusted so many times the screw holes are stripped. We fix all three in one visit, and the gate swings balanced when we leave.
Driveway Gate Repair in Selma
Driveway Gate Repair in Selma spans two very different jobs: the ornamental steel swing gate on a residential lot and the heavy tube-steel slide gate on a vineyard parcel. Both fail in ways specific to this city. A residential driveway gate on Floral Avenue or Sherman Street typically needs a hinge replacement, a weld repair at a stress crack, or an opener board that burned out in the summer heat. A farm slide gate off Mountain View Avenue or Highway 43 usually needs the roller track cleared of raisin harvest dust, a new bearing, or a post re-anchored because the footing shifted. Residential driveway gate repairs here run $220 to $520. Agricultural slide gate work runs higher, often $350 to $850, because the hardware is heavier and the post work is structural. We quote the exact number in writing before the first tool comes off the truck.
Automatic Driveway Gate Openers
Selma’s late-summer harvest dust is the single biggest mechanical killer of automatic gate openers. The fine particulate works its way into worm gears and roller tracks, and by late August a perfectly good motor can seize because the gears are packed with grit. We clean, re-lubricate, and replace drive components, and we stock Linear, Viking, Ghost Controls, and DoorKing parts locally so most opener repairs happen same-day.
Slide Gate Track and Roller Service
Slide gates on Selma’s farm and packing-shed parcels take abuse that residential swing gates never see. Track debris, abrasive grit, and shifting valley soil all contribute. We replace worn rollers, straighten bent track sections, and re-anchor the posts that carry the gate. A quick late-summer service call often prevents a dead gate in September.
Trusted Brands We Service in Selma
We stock local parts for the brands Selma properties actually run. LiftMaster openers are common on residential driveway gates, Viking and DoorKing show up on farm entrances, and Ghost Controls and Linear are frequent on smaller automatic gates. Because our techs train on these systems rather than guessing, most repairs get the right fix on the first visit. If we need a part, our San Antonio parts coordination keeps turnaround tight, and we’ll tell you the timeline before you commit to the job.
Common Gate Repair Problems We See in Selma Homes
- Harvest dust in the tracks and gears: Between mid-August and late September, Selma’s raisin harvest fills the air with fine particulate that packs into slide gate roller tracks and worm-drive opener gears. More bearings and motors fail in those six weeks than the rest of the year combined.
- Tule fog corrosion on steel hinges and welds: November through February, low-level moisture sits on ferrous hardware and eats through welds and hinge bolts. Painted steel gates corrode at the weld seams first because the original coating was never spec’d for this moisture cycle.
- Summer heat warping wood and PVC: Consecutive 105°F-plus afternoons warp wood and PVC panels until they bind in their frames. This often shows up as a gate that swings fine in the morning and jams by 4 p.m.
- Post footings failing before the gate does: Heavy tube-steel farm gates on vineyard parcels rely on posts anchored in shifting valley soil. When the post leans, the gate sags, and replacing the panel without re-pouring the footing just buys a second repair.
Pricing for Gate Repair in Selma, TX
Ninety percent of the gate repairs we do in Selma fall between $180 and $850. A standard hinge or latch replacement runs $180 to $320. A sagging wood gate repair, including realignment and hardware, runs $160 to $360. An opener motor, board, or drive component replacement runs $220 to $520 depending on the brand. A full residential driveway gate replacement with galvanised steel and stainless fixings runs $900 to $2,400 installed. The quote you get is the price you pay; we write it down before any work begins. Call (626) 649-4572 for a free estimate, and we’ll walk you through the numbers in plain English.
We Also Serve Cities Near Selma
Beyond Selma, our Gate Repair team handles calls in Houston, San Antonio, Dallas, and Fort Worth. If your property is outside Selma proper but you’re still dealing with a gate that won’t close, call us. Each city has its own climate patterns and gate styles, and we adjust our approach accordingly.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Selma
Raisin harvest dust is the direct cause. From mid-August through September, fine particulate fills the air and packs into slide gate roller tracks and worm-drive opener gears. The grit grinds bearings, seizes motors, and causes more opener failures in those six weeks than the rest of the year combined. A preventive service call in early August clears the tracks and re-lubricates the drive components before the dust does its damage. Call (626) 649-4572 to schedule one; our estimate is free.
Usually it’s the hinge post, not the gate panel, that has failed. On Selma’s older block-wall and chain-link perimeters, steel hinge posts set into shifting valley soil corrode at the footing and lean. If the panel is structurally sound, we pull the post, pour a new concrete footing, and re-hang the gate with galvanised hardware. That runs roughly $220 to $480. If the panel itself is cracked or the welds have separated from years of tule fog exposure, replacement makes more sense. We’ll show you the written price for either option before we start.
Galvanised steel with stainless fixings, no question. Selma properties that border active vineyards take a double hit: raisin harvest dust abrades the surface, and tule fog moisture attacks the welds and bolts. Painted steel fails at the weld seams first because standard paint was never spec’d for this moisture-and-heat cycling. Galvanised steel resists both, and stainless hinges and bolts hold up far longer than zinc-plated hardware. For driveway slide gates on farm parcels, tube-steel frames with stainless rollers and galvanised track brackets are the spec that actually lasts here.
Yes. Automatic gate openers installed in California, including Selma and all of Fresno County, are required to have safety devices that reverse the gate when an obstruction is detected. That typically means photo-eye sensors and, on many systems, a contact edge or pressure strip. Our techs install and test these on every automatic gate job; we won’t wire an opener without them. Call (626) 649-4572 if you’re not sure whether your system is current.
Twice a year, with one of those services timed for early August before raisin harvest dust peaks. A spring service handles tule fog moisture damage and checks the post footings after winter soil movement. The August service clears roller tracks, greases worm gears, and replaces worn bearings before the six-week dust season hits. Most Selma farm gates that get this rhythm avoid the September breakdowns that stop packing-shed traffic. Our written price covers the service, and we’ll quote the exact number before we schedule anything.
Call Latch & Post Gate Repair in Selma
If your gate is sagging, your opener is dead, or you just want a straight answer on what a repair should cost, call (626) 649-4572. A live person answers around the clock, and we’ll give you a free estimate for any gate repair in Selma. You’ll get a written price before any work starts, a technician who respects your floors and your family’s quiet hours, and a cleanup photo before we leave. That’s the job we focus on: the latch that holds your gate and the post that carries it.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Selma, TX.