Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Francisco
A sagging pedestrian gate on a Noe Valley side yard or a driveway gate that won’t open on a Potrero Hill slope usually comes down to two things in San Francisco: a burned-out opener motor or corroded hardware that fog and salt air have been eating for years. Most gate repairs in San Francisco run between $180 and $560, and a slope-rated operator replacement on a steep driveway typically lands between $900 and $1,400 installed – and you’ll see the exact number in writing before any work starts. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, and we’ve worked on San Francisco’s steep driveways, narrow Victorian side passages, and fog-dampened gate electronics since 2009. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is San Francisco’s Preferred Gate Repair Company
San Francisco homeowners don’t just need a gate that opens. They need one that survives a 20% grade, months of fog, and a 25-foot lot that leaves almost no room to work. Our Gate Repair technicians live with those constraints on every job, which is why crews servicing San Francisco carry slope-rated operators, stainless hardware, and drop cloths for the tight indoor passages where a gate track has to be fished through a Victorian hallway.
Every technician who arrives at your door is background-checked, uniformed, and trained on the brands San Francisco families actually own – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls repair in San Francisco, DoorKing, Elite, and Mighty Mule. We write the price before we touch anything, and we put on shoe covers and lay drop cloths before stepping inside your home. If we move a planter or a stroller to reach a hinge post, we ask first. When the job is done, we photograph the clean-up and show you. That routine is part of the Cedarwell C.A.R.E. values – Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. Every repair is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right – no argument, no fine print.
Owner Cody Beckman set that standard for every Latch & Post crew. It means a San Francisco homeowner in the Outer Sunset gets the same care routine as one in Bernal Heights: a written price, covered floors, and a technician who knocks before touching anything.
Wood Gate Repair in San Francisco
Wood Gate Repair in San Francisco is less forgiving than anywhere else in the Bay Area because the marine layer keeps cedar and redwood damp for months at a time, and soft wood swells, sags, and rots around century-old iron hardware in a way that inland climates never see. Most wood gate repairs in San Francisco run between $220 and $480, including a sag correction, new lumber at the rot points, and refastening the latch and hinge hardware.
Rotted Post and Frame Work on Fog-Dampened Lots
In the Outer Sunset and Inner Richmond, the prevailing July fog means a posts get soft at the base where ocean moisture sits. We remove the rotted section, sister in pressure-treated or rot-resistant lumber, and re-seat the hinge hardware so the gate closes square again. If the post is original to a Victorian, we match the finish rather than replacing it with something that looks out of place.
Sagging Pedestrian Gates on Narrow Side Passages
San Francisco’s row houses put pedestrian gates against narrow side passages where one corner drops and the latch stops lining up. We adjust the hinge tension, add a tension rod or anti-sag brace, and re-align the latch so the gate closes without dragging. The price is always written before we start, which matters when the job requires working in a passage that’s only a few feet wide.
Driveway Gate Repair in San Francisco
our Electric Gate Repair in San Francisco for driveways usually means working on a slope. Driveways in Noe Valley, Twin Peaks, Bernal Heights, and Potrero Hill routinely run at 15% to 20% grades, which forces every residential gate opener in the city to be a slope-rated, anti-rollback, high-continuous-duty unit. A flat-terrain opener burns out its motor in a single season on these hills, before salt air even gets to the gears. Most driveway gate repairs in San Francisco run between $300 and $680 for mechanical and sensor work, while a slope-rated operator replacement with anti-rollback typically runs $900 to $1,400 installed.
Slope-Rated Operator Replacement on Steep Driveways
On a steep Noe Valley driveway, our crew pulled a LiftMaster operator whose motor had cooked after six months of hauling a swing gate up an 18% slope, and the hinge post footing was pulling out of saturated soil. We poured a deeper, pilaster-style footing, corrected the sag at the hinge post, and replaced the operator with a slope-rated, anti-rollback model. The gate has run through two fog seasons since without a callback. That’s the Standard in San Francisco, not an upsell, and skipping it is the single most common source of repeat failures we see.
Slide Gates on 25-Foot Victorian Lots
Where a swing gate can’t open because the lot is too narrow or the driveway opens right onto a sidewalk, a slide gate is the only answer. We replace bent tracks, worn rollers, and failed limit switches, and we verify the safety photocells and entrapment protection still work after the repair. In tight side yards, the track often runs within inches of a shared wall, and we do that work without disturbing the neighbor’s side passage.
Trusted Brands We Service in San Francisco
Our San Francisco crews are factory-trained on the openers families actually have bolted to their garages and gate posts. We repair and service FAAC, BFT, Linear, and Viking equipment, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we’re a gate specialist and not a general handyman, our trucks carry the limit switches, gear kits, photocells, and receiver boards for these brands locally, so a San Francisco repair doesn’t stall for three days waiting on a part. If you tell us the brand and model when you call, we often arrive with the right part on the first trip.
Common Gate Repair Problems We See in San Francisco Homes
- Flat-terrain operators that burn out on steep grades. On driveways in Noe Valley, Twin Peaks, Bernal Heights, and Potrero Hill, an opener sized for a flat driveway overheats its motor and strips its gears after a few months of hauling a heavy gate uphill. This is the number-one repeat-failure source in San Francisco, and the fix is a commercial-grade, slope-rated unit with higher continuous-duty torque.
- Fog-and-salt corrosion in western neighborhoods. The marine layer that sits over the Outer Sunset, Inner Richmond, and West Portal for much of the year drives moisture into steel hinges, gate tracks, and opener housings. Salt-laden Pacific air accelerates oxidation well past what manufacturers’ rated lifespans assume, and we replace rusted hardware with coated or stainless parts where conditions demand it.
- Sagging original wrought-iron pedestrian gates on narrow lots. On Victorian and Edwardian side passages built on 25-foot lots, century-old iron gates sag at the hinge post and the latch bar drops below the strike plate. We correct the sag, service the original mortise lock where we can, and re-set the post if the soil has settled under it.
- Shared driveways and rights of way that have to keep working. Many San Francisco homes share a driveway or a converted-garage swing gate with a neighbor. Our crews stage the work so the vehicle and pedestrian path stays usable during the repair, and we protect the shared surface with drop cloths and plywood as needed.
Pricing for Gate Repair in San Francisco, CA
What you’ll pay for gate repair in San Francisco depends on the failure, but these are the ranges we see most: a standard gate-latch replacement runs $180 to $320, a wood gate repair with sag correction $220 to $480, a hinge and post repair $250 to $500, and a full slope-rated driveway operator replacement $900 to $1,400 installed. Automatic gate electronics repair – a receiver board, limit switch, or safety sensor – typically comes in between $200 and $500. Before any work begins, you get a written price. We don’t start until you approve the number, and nothing gets added at the end without your say-so. Estimates are free at (626) 649-4572.
We Also Serve Cities Near San Francisco
Our crews work regularly in the neighborhoods around San Francisco, and we answer calls from Daly City, Brisbane, Sausalito, and South San Francisco. If you’re just over the county line and your gate is down, call us – we’ll tell you straight whether we can get there today and what the trip will cost before you commit.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Francisco
Because the opener is the wrong machine for the grade. Noe Valley driveways often run 15% to 20%, and a residential operator sized for flat terrain burns out its motor inside a season when it’s forced to haul a swing gate up that angle every day. The fix is a commercial-grade, slope-rated unit with anti-rollback and higher continuous-duty torque. Call (626) 649-4572 and we’ll measure the grade and the gate weight and give you a written price.
Faster than anywhere else in the Bay Area. The marine layer that sits on the western neighborhoods for months each year keeps steel hinges and tracks damp, and salt-laden air eats through uncoated hardware and motor housings well inside a decade. We replace oxidized parts with coated or stainless hardware, and we can tell you what’s worth saving and what has to go. Call us for an honest look at the rust before it drops the gate off its hinges.
We check the hinge post and the soil around its base. On San Francisco’s 25-foot Victorian row-house lots, side-yard passages are tight and the post is often original to the home. If the soil has settled or the post is pulling out, no hinge adjustment will hold. We correct the post footing, re-seat the hinges, and re-align the latch so the gate closes square. The price is written before we move any dirt.
Yes, and we keep it usable. Many San Francisco homes share a driveway or a converted-garage swing gate with a neighbor, and a repair can’t shut down the only vehicle access for a day. We stage tools and materials on drop cloths, keep one lane open where the site allows, and clean up every evening. If the gate has to be disabled briefly, we’ll tell you how long and coordinate with the neighbor before we start.
Your gate should have working safety photocells and a reversing edge or entrapment sensor that stops and reverses the gate if it hits a person, a child, or a pet. We check those on every automatic gate repair, and we replace any sensor that isn’t functioning. It’s part of every job, not an add-on. Call (626) 649-4572 if your gate isn’t reversing when it meets resistance.
Call Latch & Post Gate Repair in San Francisco
If your gate is sagging, sticking, or dead on a San Francisco slope, call (626) 649-4572 and a live person will answer. We’ll ask what the gate is doing, give you a straight answer on what it’ll likely cost, and schedule a visit. You’ll get a written price before we start, shoe covers and drop cloths if we step inside, and a photo of the clean-up before we leave. Owner Cody Beckman and our San Francisco crews do gate repair the careful way – clean floors, quiet tools when kids are asleep, and the number on paper before anything gets touched.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Francisco since 2009.