Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Bruno
Gate repair in San Bruno comes down to one thing more than any other: wind. The San Bruno Gap funnels Pacific gusts across the peninsula with real force, and gates here take a beating that hardware in Millbrae or South San Francisco simply doesn’t. Most San Bruno gate repairs we handle involve racked frames, leaning posts, or openers that won’t stay put when the afternoon wind kicks up. We know these streets, we know these gates, and we’ll give you a written price before we touch a single bolt. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is San Bruno’s Preferred Gate Repair Company
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why San Bruno homeowners call us instead of a general handyman. We’re part of the Cedarwell family of independently owned and operated gate specialists, with a 365-Day Done Right Promise behind every repair and installation. If it’s not done right, we make it right. No argument, no fine print.
Our technicians are background-checked and uniformed. They knock before touching anything, lay drop cloths on your floors, and put on shoe covers before stepping inside. Pets and kids matter to us, and the cleanup photo before we leave is proof we left the place the way we found it. In San Bruno, where a gate job often starts with a backyard full of wind-blown debris and a tilted post, that routine matters more than you’d expect.
We answer every call with a live person, 24 hours a day, 7 days a week. No voicemail, no callback queue. When your gate is stuck open on a windy Tuesday evening, you talk to someone who can help immediately. Scheduling for San Bruno homes is coordinated from our San Francisco Bay Area office, and crews serve this city directly.
Wrought Iron Gate Repair in San Bruno
Wrought iron gate repair in San Bruno usually means one of three things: a panel that’s racked out of square from years of wind load, hinge hardware that’s rusted through from dual salt-air exposure, or a post that’s heaved out of its original footing. The salt-air combination here, marine layer rolling in from the Pacific plus bay-side humidity from the east, accelerates corrosion faster than in sheltered Peninsula cities. Hardware that lasts 15 years in Burlingame often shows significant rust failure in 8 to 10 years here.
Most standard wrought iron hinge replacements run between $180 and $340, depending on whether the post itself needs resetting. You’ll see the exact number in writing before we start. A full panel straightening and re-welding job typically lands between $400 and $900 in San Bruno, again with the written price up front and agreed before any work begins.
Hinge and post work on aging iron
The flat streets east of El Camino Real are full of mid-century homes where the original hinges and posts have been fighting the Gap wind for sixty-plus years. When a hinge shears, the panel drops and drags, and that drag tears up the opener. We replace the hinge, check the post for tilt, and quote the post reset separately if it’s needed, so you know the full picture before anything happens.
Rust repair and repainting
San Bruno’s marine layer doesn’t just sit on the surface, it works into every bolt and weld. We grind back the rust, treat the metal, and where there’s a choice, we use coatings and lubricants that are safer for pets and kids. If you need a section re-welded, we quote that separately and show you the price before the torch comes out.
Metal Gate Repair in San Bruno
Metal gate repair in San Bruno spans aluminum driveway gates, steel side-yard gates, and the occasional full-height privacy panel. The failure we see most on metal gates here is wind-driven racking. Solid-infill panels act like sails in the Gap wind, and over time the frame torques, hinges shear, and the opener’s obstruction sensor starts tripping on a panel that’s no longer tracking straight. It’s not a breakdown so much as a slow, steady twist.
A metal gate realignment in San Bruno typically runs $150 to $300. Replacing sheared hinges on a standard driveway gate lands between $220 and $450. If the frame itself is racked and needs cutting and re-welding, plan for $500 to $1,100 depending on panel size and steel thickness. The written quote covers it exactly, with no surprises at the end.
Gate realignment and frame repair
When a metal gate starts scraping along the ground or won’t close flush, the frame has usually twisted out of true. We square it back, reinforce the weak corner, and check the opener’s stroke so it stops fighting the panel. On newer metal gates, we also look at the bottom rail, which takes the brunt of wind load and is often the first part to fatigue.
Post footing resets
Posts set in original 1950s concrete pads along San Bruno’s older flat streets have absorbed decades of wind-load cycling. They heave, tilt, and suddenly a simple hinge swap becomes a full footing reset. We quote the reset before starting, explain why it’s necessary, and do the concrete work so the post actually carries the gate again. This is the difference between a fix that lasts and a fix that fails next windstorm.
Trusted Brands We Service in San Bruno
We’re factory-trained on the brands families in San Bruno actually own, including Linear, Viking, Ghost Controls, and DoorKing. That training means we arrive with the right replacement parts and the right diagnostic tools for your specific opener, not a generic guess. We stock common Linear and DoorKing components for San Bruno customers, which shortens turnaround on controls and motor swaps. When your Viking or Ghost Controls system is misbehaving after a wind event, we can usually get it sorted in a single visit.
Common Gate Repair Problems We See in San Bruno Homes
- Wind-driven racking on solid gates. The Gap wind loads solid-infill panels far harder than in Millbrae or South San Francisco, so frames twist and hinges shear instead of wearing out quietly. The opener then cycles endlessly as the obstruction sensor trips on the misaligned panel.
- Posts heaving out of old concrete pads. Along the flat streets east of El Camino Real, original 1950s footings have been worked loose by decades of wind-load cycling. A tilted post isn’t a hinge problem, it’s a footing problem.
- Rust failure from dual salt-air exposure. Marine layer from the west and bay humidity from the east eat through hinge hardware, latch mechanisms, and steel post bases in 8 to 10 years. Sheltered Peninsula cities see the same hardware last 15.
- Openers that reverse on their own. When afternoon wind catches a racked panel, the safety photocell trips and the gate reverses mid-cycle. Fixing the panel and the post alignment usually resolves the ghost-reversal without replacing the operator.
Pricing for Gate Repair in San Bruno, CA
Gate repair pricing in San Bruno reflects the wind and salt-air conditions specific to this city. A standard hinge replacement runs $180 to $340. Gate realignment lands between $150 and $300. Full post footing resets, common on older streets east of El Camino Real, typically run $500 to $1,100 depending on concrete work and post size. Wrought iron rust repair and re-welding falls between $400 and $900 for most residential panels. Every job starts with a written price delivered before any work begins. You approve the number, you know the number, and the invoice matches it. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near San Bruno
Our Gate Repair team works throughout the northern Peninsula. We regularly serve San Bruno homeowners alongside customers in Millbrae, South San Francisco, Pacifica, and Brisbane. Same crew standards, same written price, same cleanup routine.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bruno
Wind pressure from the San Bruno Gap is tripping your gate’s obstruction sensor, almost always because the panel has racked out of alignment and is no longer breaking the photocell beam cleanly. The fix is usually a realignment of the panel and a check of the hinge post footing, not a new opener. Call (626) 649-4572 and we’ll diagnose it in one visit with a written quote before we touch anything.
San Bruno gets a double dose of salt air: marine layer from the Pacific on one side and bay-side humidity from the east. That combination corrodes hinge hardware, latch components, and steel post bases significantly faster than in Burlingame’s more sheltered position. It’s normal for this city, and it’s why we stock corrosion-resistant replacement hardware for local homes.
Every automatic gate has a manual release mechanism, usually a keyed handle or pull cord near the operator or on the gate itself, so you can open and close the gate by hand during a power outage. If you’re unsure where yours is or whether it’s working, call (626) 649-4572 and we’ll walk you through it over the phone or schedule a visit to show you in person. Never force the gate beyond its stop point, because you can shear the release and lock the panel in place.
The panel looks fine because it’s not the panel. In San Bruno, sagging gates most often trace back to the hinge post, which has heaved or tilted out of its original concrete pad after decades of wind-load cycling. The panel hangs straight, but the post it’s attached to is leaning, so the whole assembly drops. That’s a post footing reset, not a new gate, and we’ll quote it upfront before any concrete comes out.
Yes. California requires entrapment protection on automatic gates, including photocells or contact edges, and it must be tested regularly. When we repair an opener in San Bruno, we verify the entrapment protection is functioning before we leave, because a racked panel in Gap wind can trip a sensor constantly and tempt some people to bypass it. We don’t bypass safety systems, and we’ll explain exactly what your gate needs to stay compliant. Call (626) 649-4572 for a free check.
On a mid-century flat street east of El Camino Real, our tech answered a call about a LiftMaster gate operator that would cycle, hit its limits, and immediately reverse every time the afternoon wind picked up. We found the swing gate’s hinge post had heaved out of the original 1950s concrete pad after decades of wind-load cycling, so the rack and pinion was misaligned and the safety photocell kept tripping on the racked panel. We reset the post footing, corrected the sag at the hinge post, realigned the operator, and verified the entrapment protection was functioning before we left. That’s the job San Bruno asks of us most often.
If your gate is leaning, stuck, rusted through, or reversing on its own in the wind, call (626) 649-4572. We’ll give you a written price before any work starts, protect your floors and quiet hours while we’re there, and make it right if it isn’t right. That’s the 365-Day Done Right Promise, and it covers every repair we do in San Bruno.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Bruno since 2009.