Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Anselmo
Gate repair in San Anselmo usually means one of two things: a wooden gate that’s swelled or sagged out of alignment, or an automatic operator that’s stopped responding after wet weather. Most repairs run $180 to $650 depending on the hardware involved, and we almost always complete the work in a single visit. If your gate won’t latch, drags on the ground, or makes a grinding noise, call us at (626) 649-4572 and we’ll give you a straight answer and a written price before any work begins.
Our Gate Repair team knows San Anselmo’s specific conditions: the creek-fed moisture that swells wooden frames every winter, the silt that packs into slide tracks after storms, and the hillside driveways where grade shifts throw swing gates out of plane. We stock the parts that fail most often here, so we’re not waiting on a distributor while your driveway sits unsecured.
Key Takeaways
- Most San Anselmo gate repairs cost between $180 and $650, with a written quote before work starts.
- We service LiftMaster, Viking, Ghost Controls, DoorKing, and Elite operators common in Ross Valley homes.
- Flood silt, saturated post footings, and wood expansion from San Anselmo Creek are the recurring culprits we fix here.
- The 365-Day Done Right Promise covers every repair. If it’s not right, we make it right. No argument.
Why Latch & Post Gate Repair Is San Anselmo’s Preferred Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family and has specialized in gates, and only gates, since 2009. We’re not a handyman with a side business in fence posts. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and that narrow focus is why San Anselmo homeowners call us for the repairs other companies give up on.
Our technicians are background-checked, uniformed, and factory-trained on the brands families actually own around here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we arrive at a San Anselmo home, we lay drop cloths on the floor and put on shoe covers before we step inside. We ask before moving or touching anything. We choose pet-safe lubricants where there’s a choice, and we can schedule around nap time if quiet matters. Then, before we leave, we take a photo of the clean-up so you can see exactly what we did. Those C.A.R.E. values aren’t an upsell; they’re standard on every visit.
And every repair carries the 365-Day Done Right Promise. If the fix isn’t right, Latch & Post makes it right. No fine print, no argument.
Metal Gate Repair in San Anselmo
Metal gate repair in San Anselmo typically involves re-welding cracked hinges, replacing rusted latch hardware, re-hanging sagging steel or wrought iron gates, and freeing jammed slide tracks. We see plenty of it on the valley floor where winter floodwater and creek moisture accelerate rust on older steel gate frames and hardware. On hillside properties built in the 1950s-70s, the problem is usually different: gate posts set into sloped ground shift over decades, loading the hinge post until welds crack or the gate drags across the drive.
Most metal gate repairs in San Anselmo run between $220 and $550 for hinge, latch, and realignment work. Full post resetting or re-welding of structural members can go higher, but you’ll see the exact number in writing before we touch anything. No surprises at the end of the visit.
Hinge and Post Repair
When a metal gate starts scraping the driveway or won’t close all the way, the post has usually moved. We lift the gate off, inspect the footing, and re-set the post in fresh concrete where needed. On San Anselmo properties near the creek, we also check for soil settlement from past flood events, which is a common root cause in this town.
Weld and Rust Repair
Steel and wrought iron gates in San Anselmo take a beating from winter rain and morning fog off the bay. We grind out cracked welds, re-weld structural joints, and treat rusted areas before priming and painting. If a gate is beyond saving, we’ll tell you that straight, and give you a written price for replacement.
Wood Gate Repair in San Anselmo
Wood gate repair in San Anselmo is, more often than not, about water. The town’s Craftsman bungalows and Victorians, many dating from the 1890s through the 1930s, hold onto original or period-style wooden fences and gates. Those old-growth redwood and fir frames have decades of seasonal expansion and contraction worked into them. Winter rains saturate the wood until it swells and binds the latch; summer drought dries it out and opens cracks around hinge screws and post caps. We repair both conditions, and usually on the same gate within the same year.
Typical wood gate repairs here run $180 to $420 for hinge replacement, latch adjustment, and re-hanging. If we’re replacing rotted sections of rail or board, the range goes higher depending on wood species and linear footage. Every quote is written and delivered before work starts.
Gate Realignment for Swollen and Warped Frames
A wood gate that sticks in winter and rattles loose in summer isn’t defective. It’s breathing with the climate. We plane or shim the frame as needed, replace worn hinge hardware, and sometimes install turnbuckle anti-sag kits on wider gates. The goal is a gate that opens with one hand, year round.
Lock Repair on Older Wooden Gates
Many San Anselmo homes still use old mortise locks or surface latches on wooden gates. When they seize, which they do after enough wet winters, we clean them out, replace broken internals where parts exist, or install a modern lock in the same footprint. We keep a range of latch and lock hardware in the truck specifically for these older setups.
Trusted Brands We Service in San Anselmo
We’re factory-trained on Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster and the other major brands in the automatic gate world. San Anselmo homeowners run a mix: DoorKing and Elite on many of the hillside driveway systems, Viking and Ghost Controls on newer installs, and LiftMaster swing operators on plenty of the Craftsman-era properties. We keep common boards, limit switches, remote receivers, and safety photocells for these brands stocked locally so most repairs don’t require a second visit. If you know the brand on your gate, telling us when you call helps, but if you don’t, the tech will identify it on arrival.
Common Gate Repair Problems We See in San Anselmo Homes
- Silt-packed slide tracks after creek flooding. The same winter storm that floods downtown San Anselmo can submerge gate operator bases in silt-laden water. We regularly pull operators and flush tracks on creek-adjacent streets where the water runs dirty.
- Swollen wooden gates that bind in winter. Craftsman and Victorian-era wood gates absorb valley-floor moisture every wet season. Latches seize, hinges pull, and the gate needs planing or realignment to swing freely again.
- Hillside driveway gates that settle out of alignment. On sloped approaches built in the 1950s-70s, grade shifts load the hinge post until swing gates drag or slide gates bind. The fix usually means re-setting the post, not replacing the operator.
- Dead operators from corroded wiring. Creek silt and standing water corrode control boards, limit switches, and wiring connections faster in San Anselmo’s low-lying areas than anywhere else in Marin. We check for oxidation on every flood-zone repair.
Pricing for Gate Repair in San Anselmo, CA
Here’s what San Anselmo homeowners can expect to pay, based on the jobs we do most often in this town:
- Wood gate realignment and hinge repair: $180-$360
- Metal gate realignment and latch replacement: $220-$480
- Automatic operator diagnostic and limit switch replacement: $280-$560
- Post re-setting (wood or metal): $350-$750 depending on footing condition and access
- Weld repair and rust treatment: $200-$550
These ranges reflect what we’ve charged on San Anselmo jobs in the past year. Your exact price is determined by the hardware involved and the condition of the post and frame, and we put it in writing before starting. Call (626) 649-4572 for a free estimate. A live person answers, day or night. We’ll ask a few questions about the gate, give you a ballpark, and schedule a visit that works for your family.
We Also Serve Cities Near San Anselmo
Our gate repair service covers San Anselmo and the surrounding Ross Valley communities, including Fairfax, Kentfield, San Rafael, and Larkspur. If you’re a few minutes up the road, call us and we’ll schedule a visit the same way: written price, clean shoes, and a repair backed by the 365-Day Done Right Promise.
Serving San Anselmo, CA - Our Local Coverage Area
We’re based in the San Anselmo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Anselmo
Because the creek floods. When San Anselmo Creek overflows, the water that runs through downtown and the adjacent flats carries fine silt and debris that pack into slide gate tracks and come to rest against operator bases. That silt holds moisture against the metal for weeks, corroding control boards, limit switches, and wiring connections. Hillside gates in Ross or upper Fairfax may get rain, but they don’t sit in silt-laden standing water. If your automatic gate sits on a low-lying street near Sir Francis Drake Boulevard, expect to service the operator more often than a hilltop neighbor would, and ask for sealed control-board housings where available. Call (626) 649-4572 and we’ll inspect yours for corrosion before it fails.
Most automatic swing and slide gate operators in San Anselmo have a manual release mechanism, usually a keyed release on the operator housing or a pull-cord handle. Turning the key and pulling the release disengages the motor so you can push the gate open by hand. If your gate is a slide gate with a rack and pinion, the release may be a lever near the motor. The important thing is to locate and test the release before you need it, because flood-related power cuts tend to happen when you least want to be outside fumbling with a lock. If you can’t find the release or it’s seized, call us and we’ll free it up and show you how it works.
Yes, and it’s more pronounced on the valley floor than in the hills. San Anselmo’s wet-season saturation swells wooden gate frames until latches bind and hinges pull. Then summer drought dries the same wood, opening gaps around hinge screws and post caps. Old-growth redwood and fir in the town’s Craftsman and Victorian-era fences takes decades to fully stabilize, and some never do. The practical fix is regular hinge re-tightening, seasonal planing or shimming, and choosing hardware that tolerates movement. We can reset the gate to work in both seasons, but annual adjustment is normal for these older wooden gates. A one-time repair typically runs $180 to $360.
Yes. Automatic gate operators sold and installed in California, including every unit we install in San Anselmo, are required to have entrapment protection: this means safety photocells across the gate opening, reversing edges on the gate itself, and proper force-sensing limits in the operator. The companies that make these systems, DoorKing, Elite, Viking, Ghost Controls, LiftMaster, and the rest, design them with these protections integrated. If your gate predates current standards or its photocells have been knocked out of alignment, we’ll recommend upgrades during the repair. It’s a safety matter, not an upsell. Keeping kids and pets safe around a moving gate is the whole point of entrapment protection.
Usually, yes. On sloped driveways built in the 1950s through the 1970s, the common failure is not the operator at all. It’s the hinge post or the concrete footing shifting with the grade, which throws the gate out of alignment and makes the operator work harder until it trips or burns out. We see this all the time in San Anselmo’s hillside neighborhoods. The fix often means re-setting the post, re-aligning the gate leaf, and then servicing the operator’s limit switches and force settings. Only if the motor itself is destroyed from prolonged misalignment do we recommend replacement. Get a diagnostic and written price first: most hillside repairs stay under $650.
Contact Latch & Post Gate Repair in San Anselmo
If your gate is sagging, sticking, or won’t open, call (626) 649-4572. A live person answers around the clock, including nights and weekends. We’ll talk through what’s happening with your gate, give you an honest ballpark, and schedule a visit. Every San Anselmo job comes with a written price before work starts, shoe covers and drop cloths inside the home, a cleanup photo before we leave, and the 365-Day Done Right Promise on every repair. Latch & Post Gate Repair is part of the Cedarwell family, serving San Anselmo since 2009 with the same care we’d expect in our own homes.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving San Anselmo since 2009.