Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Richwood
Gate repair in Richwood costs between $140 and $680 on most jobs, with sliding gate track work and wrought iron weld repairs landing at the upper end and simple latch or hinge fixes at the lower. We get to Richwood homes quickly, usually within the day, because our crews know FM 2004, Brazosport Boulevard, and the neighborhoods off Oyster Creek Drive without a map. If your gate is sagging, stuck, or simply refusing to open, call (626) 649-4572 and we will give you a written price before any work begins. That price is the price, full stop.
Why Latch & Post Gate Repair Is Richwood’s Preferred Gate Repair Company
We are part of the Cedarwell family, founded in 2009, and we work only on gates. Not fences, not general handyman calls, not a little of everything. Just gates. That narrow focus means our technicians arrive already knowing what Richwood gates do after a heavy hurricane season, and they carry the right parts for the brands local families actually own: FAAC, BFT, Linear, and Viking among them.
Our technicians are background-checked, uniformed, and factory-trained on the gate operators and hardware Richwood homeowners have relied on since the area’s ranch-style homes went up in the 1960s through the 1980s. When we walk your property, we knock first. When we step inside, we put on shoe covers and lay down drop cloths. Before we leave, we photograph the cleaned-up work area. This is the Cedarwell C.A.R.E. routine: Clean up like it’s our own home. Ask before we move anything. Respect your time and your quiet. Explain the price before we start.
Every repair we do is covered by the 365-Day Done Right Promise. If the fix isn’t right, we make it right. No argument, no fine print, no phone tag.
Sliding Gate Repair in Richwood
Sliding gate repair in Richwood usually runs between $180 and $520, depending on whether the track is damaged, the rollers are worn, or the operator itself needs work. Most Richwood sliding gates are heavy chain-link or tube-frame models on flat concrete pads, and the combination of coastal humidity and industrial particulate from the nearby Dow/Freeport corridor eats through track hardware faster than you would expect. We see pitted rollers, corroded V-track, and seized gate wheels on jobs across Richwood every month.
Track and Roller Failure
A sliding gate that grinds, shudders, or stops halfway down its path usually has a track problem, not a motor problem. Crushed rock, sand, and rust scale build up in the V-track and destroy the rollers. We clear the track, replace the worn rollers with corrosion-resistant units, and set the gate back to true travel.
Operator Strain on Misaligned Gates
When a sliding gate sits even slightly out of level, the operator pushes harder on every cycle until the thermal overload trips. In Richwood this is extremely common after a flood year like Harvey, because concrete footings under the track heave. We level the track base and re-set the operator so it cycles cool instead of fighting the gate.
Wrought Iron Gate Repair in Richwood
Wrought iron gate repair in Richwood typically costs between $220 and $680, and the price depends mostly on how much welding and section replacement the gate needs. The wrought iron gates around Richwood are often ornamental entry gates on older ranch homes, and the coastal environment is not kind to them. Salt air and chemical particulates work into every pinhole in the paint, rust the metal from the inside out, and weaken the welds until a hinge post cracks or a picket snaps loose.
Hinge Post and Weld Failure
We rebuild cracked hinge posts, replace rusted-through sections, and re-weld gates so they hang plumb and swing without dragging. On many Richwood properties the original posts were set decades ago, and the footing has shifted enough that a post-level repair is the only thing that will hold.
Rust Repair and Repainting
We grind out rust scale, treat the bare metal, and weld in replacement sections matched to the gate’s original profile. If you want the gate repainted after the repair, we can do that on the same visit when weather allows, using products that stand up better to Gulf Coast humidity.
Trusted Brands We Service in Richwood
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Richwood, we see a lot of older FAAC and LiftMaster slide operators on acre-lot driveways, plus BFT and Viking units on smaller residential gates. We keep common boards, limit switches, and photo-eye kits stocked so most Richwood repairs happen in a single visit. You won’t wait a week for a part to ship from Dallas.
Common Gate Repair Problems We See in Richwood Homes
- Operator trips thermal overload after rain. Richwood sits inside the Brazos River floodplain, and saturated ground shifts footings enough to bind the gate. The motor strains, overheats, and shuts down. The fix is almost always at the post, not the control board.
- Corroded hinges and post welds on solid infill gates. Flat terrain gives tropical storm winds a clean run, and a solid iron or wood-infill gate catches that wind like a sail. Repeated gusts flex the hinge welds until micro-cracks open up and Gulf humidity finishes the job.
- Post-Harvey footing heave. Many Richwood homeowners reinstalled automatic operators at the original height after Harvey, but the flood had lifted or shifted the concrete beneath the post. The gate now sits out of plumb and the operator fights it on every cycle.
- Rust in motor housings and electrical enclosures. The Dow/Freeport corridor adds chemical particulate to the standard coastal salt air. We open operator housings that look fine outside and find corroded wiring terminals and pitted limit switches inside.
Pricing for Gate Repair in Richwood, TX
A standard gate latch or hinge replacement in Richwood runs $140 to $240. Realignment work on a sagging gate typically falls between $180 and $320. Sliding gate track and roller rebuilds run $180 to $520, and full wrought iron weld repairs with rust treatment land between $220 and $680. Electric operator replacement or control board work usually starts at $350 and goes up from there depending on the brand and horsepower.
Every estimate is free. You get a written price before any work starts, and that number does not change unless we find something hidden we need to show you first. For an exact quote on your Richwood gate, call (626) 649-4572.
We Also Serve Cities Near Richwood
Our Gate Repair teams work throughout the Houston metro and beyond, including Gate Repair in Richwood and surrounding communities. We also serve homeowners in Houston, San Antonio, Dallas, and Fort Worth with the same written-price and cleanup routine we bring to every Richwood job. Scheduling is coordinated through our Dallas-Fort Worth office, and crews serve Richwood locally.
Serving Richwood, TX - Our Local Coverage Area
We’re based in the Richwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richwood
Because the footing under your gate post or track likely shifted, not because the motor failed. Richwood sits in the Brazos River floodplain, and after heavy rain or a storm like Harvey, saturated soil heaves the concrete that anchors your gate. The gate goes out of plumb, the operator strains harder on every cycle, and the thermal overload shuts it down. We check the footing and alignment before we ever point at the motor. Call (626) 649-4572 for a free inspection.
Most FAAC, BFT, Linear, and LiftMaster operators have a manual release mechanism, usually a key or pull chain near the motor head. Turn off the operator power first, engage the release per the manufacturer’s instructions, and move the gate slowly by hand. If the gate is heavy or you are unsure, don’t force it. A gate that fights you can slip. Our technicians can walk you through it on the phone day or night, or come out and show you in person so you know exactly what to do before the next storm.
Richwood deals with two corrosion sources at the same time. Gulf of Mexico salt air is the first. The second is chemical particulate drifting from the Dow/Freeport petrochemical corridor a few miles away. Together they oxidize gate hinges, welds, rollers, and operator circuit boards years ahead of what the manufacturer would call normal. We use corrosion-resistant replacement parts and seal electrical enclosures accordingly, because the standard stock parts simply don’t last here.
Usually yes. We reset the post or track footing back to level and plumb, then rehang or re-track the gate. The gate panel itself is often fine. This was the case at a home we worked on off Elm Street near FM 2004: a 1990s LiftMaster slide gate kept tripping thermal overload, the owner blamed the motor, but the real problem was a Harvey-heaved footing. We re-poured the footing plumb, replaced the corroded track and rack, and the original operator has run cool since. Call (626) 649-4572 for a free assessment.
Yes, and not just for code compliance. Photo-eyes stop the gate from closing on a child, a pet, or a car. Many Richwood gates from the 1960s through the 1980s were installed without them, but repair and service standards have changed. We can retrofit UL-listed photo-eyes onto almost any operator we service, including older FAAC, BFT, and Linear units. It is a worthwhile safety upgrade, and we will quote the exact cost in writing before we start.
If your gate is sagging, seized, or tripping its overload in Richwood, call us at (626) 649-4572. We will give you a straight answer, a written price, and a cleanup photo before we leave. Latch & Post Gate Repair, part of the Cedarwell family, handles gate repair, gate installation, and electric gate repair across Richwood. Our crews are background-checked, uniformed, and factory-trained on the brands you already own. Every job is covered by the 365-Day Done Right Promise. Call now for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Richwood since 2009.