Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Richland Hills
Gate repair in Richland Hills usually comes down to one thing: a steel or wood gate that won’t close square because the post beneath it has moved. The Blackland Prairie clay under this part of Tarrant County expands when it rains and shrinks hard in summer, and over 50 or 60 years that cycle torques hinge posts out of plumb. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we’ve worked on enough 1960s brick ranches off Rufe Snow Drive and Glenview Drive to know the pattern before we even park the truck. If your gate drags, sags, or won’t latch, call (626) 649-4572 and we’ll give you a straight answer and a written price before anything gets touched.
Why Latch & Post Gate Repair Is Richland Hills’s Preferred Gate Repair Company
Richland Hills homeowners call us because we name the actual problem instead of guessing at it. When a gate won’t latch on a house off Labadie Drive, the issue is rarely the latch itself. It’s the post. The clay here heaves in wet winters and contracts in August, so a post set without a proper concrete collar will drift a quarter inch every season until the gate misses the strike by two full inches. We fix the footing, not just the hardware, and that’s the difference between a gate that works for six months and one that holds square for years.
Our Gate Repair team works in uniform, background-checked, and trained on the operator brands families in this area actually own: LiftMaster, FAAC, BFT, Linear. And because were part of the Cedarwell family, every visit follows the same care routine. Shoe covers and drop cloths go down before we step inside. We ask before moving anything. We explain the price before the work. And we take a photo of the cleanup before we leave, because you should see that your floors stayed clean even if you weren’t standing there the whole time.
One more thing worth saying plainly: a live person answers our phone 24 hours a day, seven days a week. Nights, weekends, holidays. No voicemail tree, no callback queue. You call, a person picks up. That matters when a drive gate won’t close at 9 p.m. and the dog is in the yard.
Metal Gate Repair in Richland Hills
Metal Gate Repair in Richland Hills almost always starts with the post, not the panel. The steel tube gates on 1960s and 1970s ranches here were built heavy, but the posts under them were often set shallow in soil that has been moving for five decades. When that post leans even a few degrees, the gate racks, the hinges bind, and the latch misses. We cut out the old footing, pour a fresh concrete collar, re-plumb the post, and then address whatever the years did to the gate itself.
Most metal gate repairs in this area run between $180 and $650 depending on whether we’re resetting one post or two, replacing hinges, and whether the operator needs tuning afterward. You’ll see the exact number in writing before we start.
Hinge and Post Resets
A sagging steel gate in Richland Hills usually isn’t a hinge problem. The hinges are just the first thing to complain when the post leans. We reset the post in a proper concrete collar, let it cure, and then hang the gate square so the hinges carry weight in a straight line again.
Gate Realignment and Latch Repair
After a post reset, a metal gate often needs its frame tweaked back into square and the latch repositioned. We check the strike alignment, adjust the post spacing, and make sure the gate swings freely without dragging the driveway slab. Most gates off Baker Boulevard and Hightower Drive have settled enough that a simple striker plate adjustment isn’t enough on its own.
Wood Gate Repair in Richland Hills
Wood Gate Repair in Richland Hills typically means a cedar or pine gate on a ranch home built between 1950 and 1975, held by a post that has been fighting the same clay soil for decades. Wood gates rot at the bottom rail, split at the hinge screws, and sag until the free corner drags a groove into the St. Augustine. But the wood rarely fails in isolation. The post under it usually needs attention too, and skipping that step means the new gate you hang will sag within the first wet-dry cycle.
Expect a wood gate repair here to run between $160 and $520 for common work like replacing a rotted rail, re-hanging hinges, or tightening a racked frame. If the post needs a full footing reset, that’s additional and quoted clearly before any work begins. You’ll always have the number first.
Sag Correction and Frame Re-Squaring
We re-square wood gates by pulling the gate back to true and adding a diagonal brace or tension hardware where the original design allowed it to sag. On older Richland Hills fences, that brace is often missing or was built with thin lattice screws instead of structural fasteners. We fix the structure, not just the symptom.
Rotted Rail and Hinge Replacement
When the bottom rail rots out, the gate’s entire weight hangs on the hinge stile and pulls the fence post sideways. We replace the rail with cedar or pressure-treated stock matched to the existing gate, re-drill clean hinge holes, and use galvanized or stainless hardware that won’t rust into the wood the way the originals did.
Trusted Brands We Service in Richland Hills
We’re factory-trained on the automatic gate operators and hardware most common in Richland Hills: FAAC, BFT, Linear, LiftMaster, Viking, DoorKing, Ghost Controls, Elite, and Mighty Mule. That matters here because many of the operators on 1970s-era ranches were retrofitted, and wiring that’s been buried in Blackland Prairie clay for 40 years does not behave like new. Our techs keep common Linear and FAAC parts on the truck so a drive gate operator repair can often be finished the same visit, and we test every safety photocell and loop detector after the repair, not just the motor. Cody Beckman, who leads our team, insists on that last check before we call a job done.
Common Gate Repair Problems We See in Richland Hills Homes
- Clay-torqued hinge posts. The shrink-swell cycle under Richland Hills heaves posts out of plumb season after season, so the gate drags on the latch side even after fresh hinges go on. The fix is a post footing reset with a concrete collar, not another hinge replacement.
- Storm-damaged latches and hinges. Spring thunderstorms roll through Tarrant County with straight-line winds that slam heavy gates against worn latches and pull loose hinges the rest of the way out. We see the worst of it in April and May along the open driveways off Rufe Snow Drive.
- Aged operator wiring and control boards. Operators installed in the 1980s and 1990s are now past their intended life, and their buried wiring has been through four decades of wet-dry cycling. A “simple” gate failure often turns out to be a tired control board, a cracked loop detector lead, and a photocell that’s been hit by a weed trimmer one too many times.
- Sagging older wood gates on 1950s brick ranches. Original fence posts were often shallow-set and the gates built without diagonal bracing. After 60 years of North Texas weather, the gate leans hard enough to drag a groove into the grass and won’t stay latched. We address the post, the frame, and the bracing together.
Pricing for Gate Repair in Richland Hills, TX
Here are the numbers we quote most often in Richland Hills. A basic hinge replacement on a single swing gate runs $120 to $240. A post reset with a new concrete collar runs $250 to $650 per post depending on depth, soil condition, and whether we’re pulling and re-setting an existing post or setting a new one. Gate realignment and latch adjustment runs $80 to $180 once the post is solid. A full metal gate re-hang with new hardware typically lands between $300 and $700. Wood gate repair, including rail replacement and re-squaring, runs $160 to $520. Automatic operator repair starts around $175 for a limit switch or control board issue and goes up from there based on parts. Every quote is written, priced, and agreed before we touch anything. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Richland Hills
While this page is written for Gate Repair in Richland Hills, our crews also cover the surrounding DFW metro and beyond. If you’re searching for gate service in Houston, San Antonio, Dallas, or Fort Worth, you’ll get the same written-price promise, the same care routine, and the same live-person phone line. The drive times change. The standard doesn’t.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richland Hills
Because the post under the gate has been moved by Blackland Prairie clay, and replacing hinges without resetting the post is like tightening a door on a leaning wall. In Richland Hills, the soil expands when wet and contracts in summer drought, and a shallow-set post moves a little more each cycle. The real fix is pulling the post, pouring a proper concrete collar footing, re-plumbing it, and then re-hanging the gate. Our techs do this regularly on ranch homes off Glenview Drive and Labadie Drive. Call (626) 649-4572 for an exact quote; estimates are free.
Yes. For long driveways and acreage entrances around Richland Hills where running mains power to the gate is impractical, we install and service solar-powered operators and low-voltage systems paired with battery backup. These are common on wider farm-style gates, and we size the operator to the gate’s weight and span rather than forcing a residential unit to do heavy work. We work with Linear, FAAC, BFT, and LiftMaster solar-capable models. Call us for a site assessment and a written price before any work starts.
Every automatic gate operator installed or serviced in the U.S. must meet UL 325 entrapment protection requirements, which typically means monitored photocells or contact edges, plus the required number of physical entrapment sensors based on the gate’s design and installation type. On Richland Hills properties with older operators, we frequently find missing or bypassed photocells that never got reinstalled after a fence post shifted and knocked them out of alignment. We test every safety device as part of the repair and bring non-compliant installations up to current code. Call (626) 649-4572 for a free inspection and exact quote.
Yes. Wide farm gates take a heavier-duty operator than the standard residential models most big-box stores sell, and Richland Hills acreage gates often span 14 to 20 feet and weigh several hundred pounds. We specify operators rated for the actual gate weight and cycle frequency, which usually means a commercial-grade FAAC, BFT, or LiftMaster unit with a reinforced post and proper mounting plate. We’ll give you a written price for the full installation before any work starts, and the 365-Day Done Right Promise covers it afterward. Call (626) 649-4572 to schedule a site visit.
Most post footing resets in Richland Hills take one day on site, with the concrete collar poured and left to cure before the gate is re-hung. We usually dig out the old footing in the morning, set the new post in concrete, and return the next day or two to hang the gate square and test the operator. In summer heat the concrete cures faster; in wet spring weather we give it extra time. We’ll never rush the cure, because a post set in uncured concrete is just going to move again. Call (626) 649-4572 for a free estimate that includes the full timeline.
Contact Latch & Post Gate Repair in Richland Hills
If your gate is sagging, dragging, or refusing to latch, call us at (626) 649-4572 and describe what you’re seeing. We’ll give you an honest take over the phone, a free written estimate before any work starts, and a crew that shows up with shoe covers, drop cloths, and a plan. We’re the Richland Hills gate crew that treats your home like our own, and we back every repair with the 365-Day Done Right Promise. Whether your gate is off Glenview Drive, Rufe Snow Drive, or anywhere else in Richland Hills, we’ll get it swinging true again.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Richland Hills and the DFW metro since 2009.