Gate Repair in Poulsbo - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Poulsbo

Gate repair in Poulsbo usually costs between $140 and $680 depending on whether we’re addressing a dropped hinge, a rotted post, or a failed operator board. Most repairs in Poulsbo get scheduled within one to three business days, and we send a written price before any work begins. If you live off Front Street, up in the 1990s subdivisions near Cedar Lane, or out on a wooded acreage lot toward Lemolo, call (626) 649-4572 and a live person answers. We know which gates in Poulsbo were built with cedar posts that are now twenty years into the wet Kitsap ground.

Call (626) 649-4572

This page covers what we actually see on Poulsbo gates: posts heaving in clay soil, galvanized hardware turning to rust in the salt air off Liberty Bay, and operators that fault out because the gate itself is no longer plumb. You’ll find honest pricing, the brands we service, and the care routine we follow on every visit. If the gate is keeping you from getting out or keeping you from closing up for a season, we can help.

Why Latch & Post Gate Repair Is Poulsbo’s Preferred Gate Repair Company

We focus on gates. Not fences, not decks, not a rotating list of handyman tasks. Latch & Post Gate Repair is a Cedarwell-family gate specialist, and that narrow focus matters when a swing gate off Liberty Bay has been through ten years of salt spray and fifty-five inches of annual rain. Our technicians are background-checked and uniformed, trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Poulsbo homeowner calls about a Viking operator that keeps tripping its safety edge, we know that board. When your Linear remote stopped pairing, we’ve fixed that exact issue this month in another Poulsbo driveway.

Every visit follows the Cedarwell C.A.R.E. values. Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. We lay drop cloths on the floor and put on shoe covers before we step inside your Poulsbo home. We take a photo of the clean-up before we leave. Those are non-negotiable inclusions, not upsells. Cody Beckman set that standard, and we hold to it on every single job.

The 365-Day Done Right Promise covers every repair and installation we do in Poulsbo. If it isn’t right, we make it right. No argument, no fine print. And when you call (626) 649-4572, a live person answers twenty-four hours a day, seven days a week. No voicemail tree, no callback queue.

Wrought Iron Gate Repair in Poulsbo

Wrought iron gate repair in Poulsbo is a regular part of our week, and it’s rarely as simple as tightening a hinge. Iron gates on Liberty Bay waterfront properties carry a specific burden: ferrous hardware that would last two decades in a dry inland town often corrodes through in under a decade here. The salt-laden air off the bay accelerates surface rust on hinges, latch bars, and decorative scrolls. A gate that still looks sturdy at chest height may be nearly gone at the post connection. Our Gate Repair team checks the structural points first, not the cosmetics.

Hinge and latch replacement on iron gates

When a wrought iron gate starts to sag or drag, most Poulsbo homeowners assume the hinges are shot. Sometimes they are. Galvanized hinges on a bayside gate often last eight to twelve years before the pin seizes or the plate rusts through. We swap in stainless or powder-coated aluminum hardware and re-set the gate plumb. A typical hinge and latch replacement runs $220 to $460 here.

Rust remediation and frame straightening

Rust on an iron gate is not just visual. In Poulsbo’s wet winters, rust blooms expand and crack welds. We grind out the affected area, weld if the frame joint has separated, and treat the surface before repainting. Wrought iron gate repair that includes welding and rust treatment usually starts around $280 and goes up based on the number of affected joints.

Metal Gate Repair in Poulsbo

Metal gate repair in Poulsbo covers a wider range than the name suggests: aluminum tube gates from the 1990s and 2000s subdivisions, steel farm-style gates out on rural acreage lots toward Keyport, and powder-coated driveway gates along the Warren Avenue corridor. The failure point is often the post. Poulsbo’s clay-heavy glacial soils hold water year-round, and that water heaves and shifts posts even when the wood or metal is still sound. The gate itself may be fine. The post is out of plumb, and everything else follows.

Gate realignment and frame straightening

A metal gate that drags on its latch side is usually telling you the hinge post has moved. We dig down, re-set the footing with a proper concrete base, and re-hang the gate with new hardware. Realignment on a standard driveway gate in Poulsbo runs $180 to $420 depending on post condition. If the post itself is rotted through, that’s a different repair and we’ll tell you exactly what we found.

Welding and cracked joint repair

Steel gates on wooded acreage lots get stressed by canopy drip from Douglas fir and western red cedar, and the constant moisture works on the welds. Cracked frame joints are common on gates that have swung for fifteen years through Poulsbo’s wet winters. We weld the joint, reinforce if the design allows, and repaint the repair. Weld work starts around $160 for a single simple joint.

Trusted Brands We Service in Poulsbo

We’re factory-trained on the brands Poulsbo families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Poulsbo homes with automatic gates have a LiftMaster or a Linear operator, with Viking and Ghost Controls more common on newer installations. We stock common boards, remotes, and safety sensors for these systems in our Seattle metro parts inventory, which means we can often complete a repair in Poulsbo on the first visit. Caught a Ghost Controls remote that won’t pair to the receiver? We can usually resolve that in one appointment rather than two.

Common Gate Repair Problems We See in Poulsbo Homes

• Hinge posts heaving out of plumb in clay-heavy glacial soil. The Kitsap Peninsula’s clay holds moisture year-round, and the freeze-thaw-saturate cycle shifts gate posts seasonally. A swing gate drops, the frame drags, and the operator starts faulting out.
• Salt air corrosion on galvanized hardware. Properties within a few blocks of Liberty Bay get hit hardest. Galvanized hinges, latch bars, and motor mounts that would last twenty years inland often fail in under a decade here.
• Cedar post rot on 1990s and 2000s subdivision gates. Many of those newer Poulsbo subdivisions installed cedar-framed gates that are now hitting the age window. Fifty-five inches of rain means the bottom six inches of post are often gone while the top looks fine.
• Operator faults from misaligned gates. LiftMaster, Linear, and Viking operators will fault out on safety sensors when the gate isn’t plumb. The operator isn’t broken. The gate is. If someone just resets the limit switch without fixing the gate, the problem returns in months.

Pricing for Gate Repair in Poulsbo, WA

We Also Serve Cities Near Poulsbo

If you’re across the water or up the road, we serve Silverdale, Kingston, Bainbridge Island, and Tracyton too. Scheduling is coordinated from our Seattle office, and crews run local routes through Kitsap County. For more on our broader service area, see Gate Repair in Poulsbo or call (626) 649-4572.

FAQs About Gate Repair in Poulsbo