Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pleasant Hill
If your gate is sagging, binding, or refusing to open, the fix usually comes down to two things: a failing hinge post or worn hardware amplified by decades of Diablo Valley heat. Most gate repairs in Pleasant Hill cost between $180 and $900 depending on the scope, and we’ll give you a written price before any work starts. Call (626) 649-4572 and you’ll reach a live person, day or night.
Our Gate Repair team works throughout Pleasant Hill every week, from the older ranch neighborhoods near Gregory Lane down to the hillside lots off Boyd Road. We know these gates. We know how the summer heat warps wood frames, how the fall Diablo winds stress hinges, and how original redwood posts from the 1960s rot at the soil line while the wood above still looks fine. That local knowledge is the difference between a fix that holds and one that fails again within months.
Why Latch & Post Gate Repair Is Pleasant Hill’s Preferred Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family and has been operating since 2009, with technicians factory-trained on the brands Pleasant Hill homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’re not a general handyman service. Every gate comes down to two parts, the latch that holds it and the post that carries it. That’s the job we focus on, and that focus shows in how we work.
Our Pleasant Hill customers consistently mention three things: the written price arrives before we touch a tool, the crew wears shoe covers and lays drop cloths inside the home, and the technician explains what happened and what the fix will be, in plain language, before starting. Cody Beckman leads our team and holds every job to the Cedarwell Care Promise: clean up like it’s our own home, ask before moving or touching anything, respect your time and quiet hours, and explain the price before the work.
Every repair and installation is covered by the 365-Day Done Right Promise. If the fix isn’t right, Latch & Post makes it right. No argument, no fine print. That’s the standard we’ve built our Pleasant Hill reputation on.
Metal Gate Repair in Pleasant Hill
Metal Gate Repair in Pleasant Hill almost always traces back to heat fatigue or wind stress, not bad craftsmanship. A powder-coated steel gate off Contra Costa Boulevard has spent every summer expanding in 100-degree heat and every winter contracting again. Over 15 or 20 years, that cycle loosens hinge bolts, cracks weld points, and eventually bends the frame itself. We see it on private driveway gates, side-yard pedestrian gates, and the wide farm-style swing gates that mark the older acreage properties along Boyd Road and Pleasant Hill Road.
A typical metal gate realignment or hinge replacement in Pleasant Hill runs $220 to $480. Weld repairs on cracked frames or re-welded hinge plates run $180 to $400 depending on the extent of the cracking. If the post itself is set in concrete and has shifted, you’re looking at $500 to $900 for a full reset and re-pour. We’ll give you the exact number in writing before any work starts.
Hinge and Post Replacement
Metal gates lean because the hinge post moves, not because the gate frame fails first. On Pleasant Hill hillside lots where grade slopes toward the street, posts heave and tilt over years, throwing the gate out of plane. We reset posts in fresh concrete, shim to true vertical, and re-hang the gate with new bolts and sleeves.
Weld and Rust Repair
Surface rust around hinge mounts and latch plates is normal on exposed metal gates here. We grind back to clean steel, weld any cracked joints, and coat the repaired area before re-hanging. Where a frame has warped badly from heat, we’ll tell you straight whether a repair makes sense or a new gate panel would serve you better for the money.
Wood Gate Repair in Pleasant Hill
Wood Gate Repair in Pleasant Hill is the single most common job we do, and the reason is specific to this city: original redwood posts from the 1950s through 1970s build-out are now 50 to 65 years old and have spent every one of those summers baking in ground that heats up far more than coastal Contra Costa. The above-ground wood can look perfectly sound while the portion at grade level has rotted through. A hinge-only repair will not hold on that post.
A standard wood gate realignment with new hinges and latch hardware in Pleasant Hill runs $180 to $350. If we’re replacing a rotted post, expect $400 to $800 including concrete removal, new pressure-treated post, and re-hanging the existing gate. A full gate rebuild with new frame, pickets, and hardware typically runs $700 to $1,200 depending on gate width and style. You’ll see the exact number in writing first.
Post Replacement at Grade Level
We dig out the old footing, set a new post in concrete, and let it cure before re-hanging the gate. This is the fix that actually lasts. On hillside lots where drainage runs toward the post, we’ll also talk about whether a gravel base or adjusted grade makes sense to slow future rot.
Gate Realignment and Latch Work
When the post is still solid, a sagging wood gate usually comes down to worn hinges, a stretched or broken latch, or a frame that’s pulled apart at the corners. We replace hardware, re-square the frame, and set the latch so the gate closes true and stays closed in Diablo wind.
Trusted Brands We Service in Pleasant Hill
We service and repair the gate openers and hardware Pleasant Hill families actually rely on, including FAAC, BFT, Linear, and Viking, alongside LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. Our technicians are factory-trained on these systems and carry common parts in the truck, which means less waiting for a follow-up visit. For older farms and acreage properties with long driveway spans, we regularly upgrade failing operators to solar-powered systems where mains power isn’t practical.
Common Gate Repair Problems We See in Pleasant Hill Homes
- Rotted redwood posts at grade level. Original posts from the 1960s look fine above ground but have rotted below the soil line after decades of Diablo Valley heat. The gate leans or binds within months of a hinge-only repair.
- Diablo wind damage to swing gates. Fall wind events off the foothills blow weakly latched gates off their stops, bending hinges and stressing fatigued hardware on exposed properties off Reliez Valley Road and Boyd Road.
- Failing solar openers on wide driveway gates. Rural and acreage properties without mains power rely on solar openers, and dead batteries or weak panels leave heavy farm gates stuck open or closed. We upgrade to appropriately sized solar systems for the gate’s weight and span.
- Hillside post heave and misalignment. Sloped ground in eastern Pleasant Hill neighborhoods causes posts to shift gradually, throwing gates out of plane and making them drag or fail to latch.
Pricing for Gate Repair in Pleasant Hill, CA
Gate repair costs in Pleasant Hill are driven primarily by the condition of the post and the width of the gate. Latch and hardware replacement runs $180 to $300. Gate realignment with new hinges runs $220 to $350. Full post replacement runs $400 to $800 including concrete work. Solar operator upgrades for wide gates start around $1,200 and go up based on gate weight and span. Every quote is written, specific to your gate, and delivered before any work begins. Call (626) 649-4572 for a free estimate.
We never start a job without your sign-off on the price. That’s non-negotiable. The number we quote is the number you pay, and if we find something unexpected mid-repair, we stop and explain it before proceeding.
We Also Serve Cities Near Pleasant Hill
Our team serves the surrounding communities of Concord, Martinez, Lafayette, and Walnut Creek with the same written-price, clean-floors standard we bring to every job in Pleasant Hill. If you’re just over the city line and dealing with a sagging farm gate or a dead opener, we’ll come out the same way we would for a neighbor here.
Serving Pleasant Hill, CA - Our Local Coverage Area
We’re based in the Pleasant Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pleasant Hill
If the post moves when you push on it, even slightly, or if you can see cracking in the concrete around the base, the post is failing. In Pleasant Hill we specifically look for rot at grade level on original redwood posts from the 1960s and 1970s, which can be completely hollowed out below the soil while looking fine above it. Hinge repair on a bad post will sag again within months. Call (626) 649-4572 and we’ll check it before you spend money on the wrong fix.
Yes. We install solar-powered openers sized for wide farm gates and long driveway spans, using LiftMaster, FAAC, and other systems matched to the gate’s weight and cycle frequency. These are common upgrades for Pleasant Hill properties where running mains power to the gate is impractical or costly, and we’ll give you a written price for the full install including panel, battery, and operator.
Yes. Safety reversal is a critical function, especially on properties with kids, pets, or livestock. If the gate isn’t reversing when it meets resistance, the obstruction sensor or entrapment protection has failed and it should be addressed before the gate is used again. We’ll diagnose the sensor, photo eyes, or control board and quote the repair in writing. Call (626) 649-4572 and tell us what the gate is doing. We’ll walk you through a quick safety check and get a technician out.
Wide gates bind for three main reasons in Pleasant Hill: the hinge post has shifted or rotted at grade, the gate frame has warped in the heat, or the operator is undersized for the gate’s weight and span. On rural properties off Boyd Road and Reliez Valley Road, we also see slope-related post movement cause the gate to drag on the ground. The fix usually means resetting the post, rebuilding or re-hanging the panel, or upgrading the operator.
Yes. We service and replace keypad entry systems, intercoms, and access control hardware on residential driveway gates throughout Pleasant Hill, including systems from DoorKing, Linear, and Viking. If your keypad works intermittently or the intercom cuts out, we’ll diagnose it on site and give you a written price for the repair before any work begins.
Contact Latch & Post Gate Repair in Pleasant Hill
If your gate is sagging, binding, or the opener has stopped working, call (626) 649-4572 for a free estimate. A real person answers, every time, 24 hours a day. We’ll schedule a visit, give you a written price before any work starts, and leave your floors clean, your post set true, and your gate working right. That’s the 365-Day Done Right Promise, and it covers every job we do in Pleasant Hill.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pleasant Hill with the Cedarwell Care Promise.