Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Plantation
Gate repair in Plantation means something different than it does in most Broward cities. Here, we’re not just fixing single-family driveway gates. We’re repairing the aging community-entry systems that guard dozens of HOA-governed subdivisions built between the late 1960s and early 1990s, plus the heavy equestrian gates out in Plantation Acres. That dual profile shapes everything we do. If your gate is sagging, stuck, dead after a storm, or refusing to close, call us at (626) 649-4572. We answer live, 24 hours a day, and we’ll walk you through what’s likely wrong before we ever roll a truck.
Why Latch & Post Gate Repair Is Plantation’s Preferred Gate Repair Company
We’re part of the Cedarwell family, and we’ve focused exclusively on gates since 2009. That focus means our technicians are factory-trained on the brands Plantation families and HOAs actually run: FAAC, BFT, Linear, Viking, and more. We don’t do general handyman work. Every call is answered by a live person, not a voicemail queue, and every visit ends with a written price in your hand before any work begins. We cover the floors with drop cloths, put on shoe covers, and send you a photo of the cleanup before we leave. That’s the Cedarwell C.A.R.E. routine, and it’s not an upsell. It’s just how we work.
We know Plantation’s gate stock better than most because we work on it constantly. From the slide operators on West Broward Boulevard to the swing-arm barriers inside communities off Nob Hill Road, and west into the acreage past Volunteer Park, we’ve seen the same failure patterns repeat for years. That local reps means we stock the parts Plantation needs, not the parts a generic service truck might carry.
Wrought Iron Gate Repair in Plantation
Wrought iron gate repair in Plantation is often less about the iron itself and more about what’s happening behind it: a hinge pulling loose from a saturated post footing, a weld that cracked when the gate twisted in a storm, or an operator arm straining against rust that’s been building since before Hurricane Irma. The iron may look fine from the curb. The structure underneath usually isn’t. Most Plantation wrought iron jobs run between $220 and $650 depending on whether we’re realigning the frame, replacing hinge hardware, or cutting out and re-welding a rusted section.
Hinge, Post, and Weld Restoration
On older Plantation homes, we regularly see hinge pins that have worn into ovals, especially on gates that swing over concrete or paver driveways. We repair or replace the hinge assembly and reinforce the post if it’s shifting. If the post is pulling away from the foundation, we address that before the gate hangs square again.
Rust Treatment and Repainting Preparation
Rust on a Plantation wrought iron gate is mostly cosmetic until it isn’t. We treat surface rust, cut out sections that have lost structural thickness, and prepare the metal for a proper repaint. Most full rust repairs on residential gates run from $300 to $700.
Metal Gate Repair in Plantation
Metal gate repair in Plantation covers the broader category: aluminum, steel, and composite gates that don’t fall under the “wrought iron” label. These gates tend to fail at their moving parts first. The metal panel stays solid while the rollers, track, or operator bearing gives out underneath it. Typical repairs in Plantation run from $180 for a misaligned track on a small pedestrian gate to $900 for a full steel gate realignment with new hinge hardware.
Track, Roller, and Bearing Work
Metal slide gates in Plantation’s HOA communities and a few Plantation Acres properties ride on ground-level tracks that collect grass clippings, sand, and standing water after the afternoon storms. We clean or replace rollers, correct the track line, and adjust the operator’s force settings so the gate doesn’t strain itself every cycle. That strain is what kills motors early.
Gate Realignment and Frame Straightening
A metal gate that drags on the ground is doing two things: wrecking its own hardware and working the operator to death. We realign the gate, check the post plumb, and reset the operator limits. Most realignments in Plantation run from $250 to $550 depending on gate weight and access.
Trusted Brands We Service in Plantation
We’re factory-trained on the operators Plantation actually runs. That list includes FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Plantation’s older HOA entries, that brand coverage matters. A 1989 Elite slide operator shouldn’t be diagnosed by someone who’s only touched modern residential openers. We keep common control boards, loop detectors, and safety sensor kits in local stock so we can move fast from Memorial Day through October.
Common Gate Repair Problems We See in Plantation Homes
- Summer lightning surges frying logic boards. Plantation’s June-October thunderstorms are the single biggest gate repair driver in the city. We see fried Viking and Elite control boards on HOA gates after nearly every major storm cell passes through. Adding a surge-protection retrofit kit is a near-automatic recommendation on these calls.
- Flooded loop detectors in low-lying community entries. Plantation’s canal-fed drainage network is a blessing for keeping streets dry, but it also means underground vehicle-detection loops and post footings in low-lying entries sit in saturated soil for weeks after heavy rain. Loops stop reading cars. Gates won’t close properly.
- Sagging gates from undersized or rotting posts. Gates built in the 1970s and 1980s often ride on posts that were spec’d for lighter panels. Add 40 years of rain, a few hurricane seasons, and heavier replacement gates, and you get a gate that drags and a post that leans.
- Obsolete control systems on mandated HOA entries. Many Plantation subdivisions still run original-era control boards and telephone entry systems. When those fail, the repair often isn’t a simple swap. The whole system may need to be brought up to current Broward County code, which we’ll explain before any work happens.
Pricing for Gate Repair in Plantation, FL
Here’s what we’re quoting for gate repair in Plantation right now: a gate latch or lock replacement runs $140 to $310. A hinge repair or post reinforcement is $220 to $550. Wrought iron weld and rust work is $300 to $700. Logic board replacement on an older HOA operator is $280 to $680, plus any surge-protection retrofit you choose. Full gate realignments run $250 to $550. If the operator is dead and needs replacement, you’re looking at $750 to $1,400 installed for a residential unit on a FAAC, BFT, or Linear system, more for larger community-entry operators. Every quote is written, itemized, and agreed before we touch a single bolt. Call (626) 649-4572 for a free estimate, and we’ll email you the numbers before you commit to anything.
We Also Serve Cities Near Plantation
While this page is focused on Gate Repair in Plantation, our crews also run service calls in Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. If you’re in one of those cities and need a gate specialist, our Gate Repair team covers the full area. The same written-price guarantee, C.A.R.E. routine, and 365-Day Done Right Promise apply wherever you are.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plantation
Lightning. Plantation sits about 10 to 12 miles inland from the ocean, so salt corrosion isn’t the dominant problem here the way it is along the coast. Instead, the June through October thunderstorm season hammers gate electronics. A single close lightning strike can cook a logic board or access-control panel on a 1980s or 1990s Viking or Elite operator. These storms are so reliably damaging that our techs stock surge-protection retrofit kits in their trucks all summer. If your community’s gate went dead after a storm, call (626) 649-4572. We can usually diagnose it over the phone and schedule a same-week fix.
Yes, often. Plantation’s master-planned HOA communities were built between the late 1960s and early 1990s, and their entry gates were installed under codes that predate Broward County’s post-Hurricane Andrew wind-load and electrical standards. When a motor on a 1985-era slide operator fails and needs replacement, the new work generally has to meet current code. That can mean a beefier mounting plate, updated wiring, and a more robust anchoring system. We’ll flag these requirements before the work starts and give you a written price that includes everything. No surprises mid-job.
Plantation Acres is its own animal. These are large-lot, agriculturally zoned properties with long private driveways. The gates are heavy slide or dual-swing units, often 16 to 24 feet wide, built to contain livestock and stop vehicles. Repairs here are structurally different from the HOA entry work that dominates the rest of the city. You’re dealing with heavier posts, larger operators, and longer cable runs. A gate realignment in the Acres often costs more than a similar-looking job in Jacaranda because of the gate mass and access. We quote those jobs in person, never over the phone.
Rarely. What’s usually happening is the hinge post has shifted, the hinge pins have worn, or the gate’s frame has twisted from years of wind load and a heavier panel than the post was designed to carry. We check the post plumb, hinge fit, and frame square before recommending any repair. Fixing the post first is almost always cheaper than replacing the gate. Most sag repairs in Plantation run from $250 to $550.
Yes. Every automatic gate system, whether residential or an HOA community entry, must have functioning entrapment protection that meets the UL 325 standard. That includes photo eyes, safety edges, or both. If our tech works on your operator, they’ll test the sensors before they leave and confirm the system stops and reverses properly. This isn’t optional. It’s a safety requirement we treat as non-negotiable on every job.
What Plantation’s Gate Repair Situation Really Looks Like
Plantation was one of Florida’s original master-planned cities, and that history created an unusual concentration of HOA-governed subdivisions whose vehicular entry gates are all aging at the same pace. The slide operators, swing-arm barriers, and telephone entry systems installed in the 1970s through early 1990s are now failing in waves. When a Viking logic board from 1989 dies, you can’t just buy a drop-in replacement off a shelf. The repair often pulls the whole entry into Broward County’s post-Hurricane Andrew compliance review. That’s a burden technicians in less master-planned neighboring cities like Davie or Sunrise rarely see at this volume.
Then there’s Plantation Acres. Those agriculturally zoned equestrian properties run long, heavy slide gates and dual-swing gates that share almost nothing with the community-entry operators that fill up most of our repair board. A technician working both segments needs different parts, different diagnostic approach, and different structural knowledge. Most gate companies treat these as the same job. We don’t.
On a 1970s-era HOA entry in Plantation, a summer lightning surge cooked the logic board on a 1989 Elite slide gate operator. The gate was dead in the open position. We swapped the board, added a surge-protection retrofit kit, and tightened the rack and pinion. But we also flagged two things that would need attention before the next storm season: a degraded loop detector and a flooded post footing. On the same visit, we checked the safety photocells and confirmed UL 325 entrapment protection was working before we left. That’s the difference between replacing a part and actually repairing a gate system.
Call Latch & Post Gate Repair in Plantation
If your gate is stuck, sagging, dead, or just not working the way it used to, call us at (626) 649-4572. We answer live, nights and weekends included. We’ll talk through what’s happening, give you a straight answer on likely cost, and schedule a time that works for your family. Every visit includes a written price before work starts, shoe covers and drop cloths on your floors, a cleanup photo before we leave, and the 365-Day Done Right Promise on everything we do. If it’s not right, we make it right. No argument, no fine print.
Written by Cody Beckman, owner at Latch & Post Gate Repair, part of the Cedarwell family.